Masterbatches of polypropylene/clay obtained by in situ polymerization and melt-blended with commercial polypropylene

In the present work, polypropylene nanocomposites were prepared from blends in the molten state of a commercial polypropylene and masterbatches of polypropylene/organophilic montmorillonite or polypropylene/organically modified sodic clay with different amounts of filler. The masterbatches were obtained by the method of in situ polymerization using fourth-generation Ziegler-Natta catalysts based on MgCl2/TiCl4 containing clay. We also evaluated the effect of adding maleated polypropylene on the properties of the blends. Materials were characterized by X-ray diffractometry, differential scanning calorimetry, dynamic-mechanical, and thermogravimetric analyses. Morphological stability of the blends was studied after annealing using the differential scanning calorimetry technique. The results showed an improvement in the mechanical properties of the blends compared to commercial polypropylene, and an increase of the clay basal spacing in the polymeric matrix was achieved, especially when maleated polypropylene is employed in the blend. Initial thermal degradation of the obtained nanocomposites increased by ∼80℃.

[1]  N. Dintcheva,et al.  Progress in Understanding of the Interactions between Functionalized Polyolefins and Organo‐Layered Double Hydroxides , 2014 .

[2]  Amandeep Singh,et al.  Polypropylene clay nanocomposites , 2013 .

[3]  Keun-byoung Yoon,et al.  Comparison of effect of surface-modified micro-/nano-mineral fillers filling in the polypropylene matrix , 2013 .

[4]  Wei Liu,et al.  Morphology, Rheological Properties, and Crystallization Behavior of Polypropylene/Clay Nanocomposites , 2013 .

[5]  S. Moradian,et al.  Polypropylene/Organoclay Nanocomposites: Effects of Clay Content on Properties , 2011 .

[6]  S. Sánchez-Valdes,et al.  Effect of different amine modified clays on the compatibility and clay dispersion of polypropylene nanocomposites , 2009 .

[7]  Jin-Yong Dong,et al.  Preparation of nano-compounded polyolefin materials through in situ polymerization technique: status quo and future prospects , 2009 .

[8]  C. Bernal,et al.  Mechanical properties of polypropylene/clay nanocomposites: Effect of clay content, polymer/clay compatibility, and processing conditions , 2008 .

[9]  S. Mohanty,et al.  Polypropylene Nanocomposites: Effect of Organo-modified Layered Silicates on Mechanical, Thermal & Morphological Performance , 2008 .

[10]  Jin-Yong Dong,et al.  Efficient preparation of isotactic polypropylene/montmorillonite nanocomposites by in situ polymerization technique via a combined use of functional surfactant and metallocene catalysis , 2007 .

[11]  Jin-Yong Dong,et al.  An in situ matrix functionalization approach to structure stability enhancement in polyethylene/montmorillonite nanocomposites prepared by intercalative polymerization , 2007 .

[12]  D. R. Paul,et al.  Evaluation of amine functionalized polypropylenes as compatibilizers for polypropylene nanocomposites , 2007 .

[13]  Aihua He,et al.  Preparation of exfoliated isotactic polypropylene/alkyl-triphenylphosphonium-modified montmorillonite nanocomposites via in situ intercalative polymerization , 2006 .

[14]  Haiqing Hu,et al.  Isotactic Poly(propylene)/Monoalkylimidazolium-Modified Montmorillonite Nanocomposites: Preparation by Intercalative Polymerization and Thermal Stability Study , 2004 .

[15]  A. Lehtinen,et al.  Thermal behaviour of polypropylene fractions: 1. Influence of tacticity and molecular weight on crystallization and melting behaviour , 1993 .