The Euro50 Extremely Large Telescope

Euro50 is a proposed optical telescope with an equivalent primary mirror diameter of 50 m. Partners of the collaboration are institutes in Sweden, Spain, Ireland, Finland, and the UK. The telescope will have a segmented primary mirror and an aplanatic Gregorian configuration with two elliptical mirrors. For a 50 m telescope there would be no economical advantage in going to a spherical primary. The size of the primary mirror segments (2 m) has been selected on the basis of a minimization of cost. An adaptive optics system will be integrated into the telescope. The telescope will have three operational modes: Seeing limited observations, single conjugate adaptive observations in the K-band, and dual conjugate observations also in the K-band. An upgrade to adaptive optics also in the visible down to 500 nm is foreseen. There will be an enclosure to protect the telescope against adverse weather and wind disturbances. Integrated simulation models are under development. The project time will be 10 years and the cost some 591 MEuros.

[1]  Jacques M. Beckers,et al.  Increasing the size of the isoplanatic patch with multiconjugate adaptive optics. , 1988 .

[2]  Nicholas Devaney,et al.  Adaptive optics for the Euro50: design and performance , 2003, SPIE Astronomical Telescopes + Instrumentation.

[3]  Torben Andersen,et al.  Is there an upper limit to the size of enclosures? , 2000, Astronomical Telescopes + Instrumentation.

[4]  Torben Andersen,et al.  Low turbulence--high performance , 1990, Astronomical Telescopes and Instrumentation.

[5]  Robert C. Romeo,et al.  Ultra-lightweight 4-meter segmented composite mirrors for extremely large telescopes , 2003, SPIE Astronomical Telescopes + Instrumentation.

[6]  Mette Owner-Petersen.  Optical design and performance analysis of a 25-m class telescope with a segmented spherical primary , 1997, Other Conferences.

[7]  Jacques M. Beckers,et al.  Control strategy for the adaptive optics of the Euro50 , 2003, SPIE Astronomical Telescopes + Instrumentation.

[8]  Terry S. Mast,et al.  The Design of the Keck Observatory and Telescope , 1985 .

[9]  Torben Andersen,et al.  Study of a 25-m telescope for optical wavelengths , 1994, Astronomical Telescopes and Instrumentation.

[10]  Jacques M. Beckers,et al.  Detailed Compensation Of Atmospheric Seeing Using Multiconjugate Adaptive Optics , 1989, Defense, Security, and Sensing.

[11]  Armando Riccardi,et al.  Adaptive secondary mirrors for the Large binocular telescope , 2003, SPIE Optics + Photonics.

[12]  Niall Gaffney,et al.  Early performance and present status of the Hobby-Eberly Telescope , 1998, Astronomical Telescopes and Instrumentation.

[13]  David D. Walker,et al.  Design Study Report-The Primary and Secondary Mirrors for the Proposed Euro50 Telescope. , 2002 .

[14]  David D. Walker,et al.  Precessions process for efficient production of aspheric optics for large telescopes and their instrumentation , 2003, SPIE Astronomical Telescopes + Instrumentation.