This paper presents an ANSI S1.11 1/3-octave filter-bank chip for binaural hearing aids with two microphones per ear. Binaural multimicrophone systems significantly suppress noise interference and preserve interaural time cues at the cost of significantly higher computational and power requirements than monophonic single-microphone systems. With clock rates around the 1MHz mark, these systems are ideal candidates for low-power implementation through charge-recovery design. At such low clock frequencies, however, charge-recovery logic suffers from short-circuit currents that limit its theoretical energy efficiency [1]. The chip described in this paper is designed in 65nm CMOS using a new charge-recovery logic, called zero-short-circuit-current (ZSCC) logic, that drastically reduces short-circuit current. It processes 4 input streams at 1.75MHz with a charge recovery rate of 92%, achieving 9.7× lower power per input compared with the 40nm monophonic single-input chip that represents the published state of the art [2].
[1]
Marios C. Papaefthymiou,et al.
187 MHz Subthreshold-Supply Charge-Recovery FIR
,
2010,
IEEE Journal of Solid-State Circuits.
[2]
Deog-Kyoon Jeong,et al.
An efficient charge recovery logic circuit
,
1996,
IEEE J. Solid State Circuits.
[3]
Jinn-Shyan Wang,et al.
A 0.36V, 33.3µW 18-band ANSI S1.11 1/3-octave filter bank for digital hearing aids in 40nm CMOS
,
2013,
VLSIC 2013.
[4]
Tobi Delbrück,et al.
A 0.5V 55μW 64×2-channel binaural silicon cochlea for event-driven stereo-audio sensing
,
2016,
2016 IEEE International Solid-State Circuits Conference (ISSCC).
[5]
Tobi Delbrück,et al.
22.5 A 0.5V 55µW 64×2-channel binaural silicon cochlea for event-driven stereo-audio sensing
,
2016,
ISSCC.