Three-Dimensional Conduction Heat Transfer Model for Laser Cladding Process

Cladding is the process of depositing a superior built-up layer on a substrate by fusion. In the present study a three-dimensional conduction heat transfer model is developed and solved using the finite-volume method in a nonorthogonal grid system for a blown-powder laser cladding process. Comparisons with experimental data for deposition of copper powder on SS316 stainless steel show that the developed model can predict the geometry of the buildup layer above the substrate within an acceptable range of tolerance. The overall absorption of the CO2 laser radiation is in the range of 14–17%.

[1]  Bin Xiao,et al.  Marangoni and Buoyancy Effects on Direct Metal Laser Sintering with a Moving Laser Beam , 2007 .

[2]  Subhransu Roy,et al.  Development of theoretical process maps to study the role of powder preheating in laser cladding , 2006 .

[3]  M. Rohde,et al.  Numerical Simulation of Laser-Induced Modification Processes of Ceramic Substrates , 2006 .

[4]  Subhransu Roy,et al.  The Effect of Marangoni-Rayleigh-Benard Convection on the Process Parameters in Blown-Powder Laser Cladding Process—A Numerical Investigation , 2006 .

[5]  J. Choi,et al.  Modeling and Experimental Verification of Transient/Residual Stresses and Microstructure Formation in Multi-Layer Laser Aided DMD Process , 2006 .

[6]  Lijun Han,et al.  Modeling and Experiments of Laser Cladding With Droplet Injection , 2005 .

[7]  R. C. Crafer,et al.  Thermal modelling of laser welding and related processes: a literature review , 2005 .

[8]  F. Liou,et al.  Modeling of laser cladding with powder injection , 2004 .

[9]  F. H. Stott,et al.  A three-dimensional numerical model for a convection-diffusion phase change process during laser melting of ceramic materials , 2004 .

[10]  Lin Li,et al.  Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances , 2004 .

[11]  E. Toyserkani,et al.  3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process , 2004 .

[12]  Chongdu Cho,et al.  Application of 3-D finite element method using Lagrangian formulation to dilution control in laser cladding process , 2003 .

[13]  Sandip Sarkar,et al.  Modelling of transport phenomena in laser surface alloying with distributed species mass source , 2002 .

[14]  A. Mahrle,et al.  NUMERICAL INVESTIGATION OF TRANSPORT PHENOMENA IN THE FUSION ZONE OF LASER BEAM WELDED JOINTS , 2002 .

[15]  Hans Engström,et al.  Energy redistribution during CO2 laser cladding , 2002 .

[16]  Lianxiang Yang,et al.  Numerical modeling and experimental investigation on the characteristics of molten pool during laser processing , 2001 .

[17]  K. Mills.  Recommended Values of Thermophysical Properties for Selected Commercial Alloys , 2001 .

[18]  Hans Gedda,et al.  Laser surface cladding : a literature survey , 2000 .

[19]  Alexander Kaplan,et al.  An analytical thermodynamic model of laser welding , 1997 .

[20]  Tarasankar DebRoy,et al.  NUMERICAL PREDICTION OF FLUID FLOW AND HEAT TRANSFER IN WELDING WITH A MOVING HEAT SOURCE , 1996 .

[21]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[22]  D. Morvan,et al.  Convection thermocapillaire au cours d'une opération de refusion superficielle par laser , 1994 .

[23]  M. Rappaz,et al.  A simple but realistic model for laser cladding , 1994 .

[24]  V. Pustovalov,et al.  Thermal processes in gas-powder laser cladding of metal materials , 1993 .

[25]  Michel Rappaz,et al.  A thermal model of laser cladding by powder injection , 1992 .

[26]  W. Steen.  Laser Material Processing , 1991 .

[27]  M. F. Amateau,et al.  FINITE-ELEMENT MODELING OF HEAT FLOW IN DEEP-PENETRATION LASER WELDS IN ALUMINUM ALLOYS , 1989 .

[28]  B. Basu,et al.  Numerical study of steady-state laser melting problem , 1988 .

[29]  A. K. Singhal,et al.  A fixed grid numerical methodology for phase change problems involving a moving heat source , 1987 .

[30]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[31]  A. Gomersall.  Industrial Applications of Lasers , 1986 .

[32]  Julian Szekely,et al.  Heat- and fluid-flow phenomena in weld pools , 1984, Journal of Fluid Mechanics.

[33]  L C Andrews,et al.  Spot size and divergence for Laguerre Gaussian beams of any order. , 1983, Applied optics.