FE simulation and experimental tests of high-strength structural bolts under tension

Abstract Experimental tests have been completed for high-strength 8.8 bolts for studying their mechanical performance subjected to tensile loading. As observed from these tests, failure of structural bolts has been identified as in one of two ways: threads stripping and necking of the threaded portion of the bolt shank, which is possibly due to the degree of fit between internal and external threads. Following the experimental work, a numerical approach has been developed for demonstration of the tensile performance with proper consideration of tolerance class between bolts and nuts. The degree of fit between internal and external threads has been identified as a critical factor affecting failure mechanisms of high-strength structural bolts in tension, which is caused by the machining process. In addition, different constitutive material laws have been taken into account in the numerical simulation, demonstrating the entire failure mechanism for structural bolts with different tolerance classes in their threads. It is also observed that the bolt capacities are closely associated with their failure mechanisms.

[1]  B. R. Kirby.  The behaviour of high-strength grade 8.8 bolts in fire , 1995 .

[2]  M. A. McCarthy,et al.  Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysis , 2012 .

[3]  Richard T. Barrett.  Fastener Design Manual , 2005 .

[4]  Yoshiaki Goto,et al.  Validity of classification systems of semirigid connections , 1995 .

[5]  Masataka Nomura,et al.  Proposition of Helical Thread Modeling With Accurate Geometry and Finite Element , 2008 .

[6]  Brian D. Cheal,et al.  Structural Steelwork Connections , 1989 .

[7]  Masataka Nomura,et al.  Proposition of Helical Thread Modeling With Accurate Geometry and Finite Element Analysis , 2006 .

[8]  Habibou Maitournam,et al.  Stable time step estimates for NURBS-based explicit dynamics , 2015 .

[9]  David A. Nethercot,et al.  Unified classification system for beam-to-column connections , 1998 .

[10]  Wang Rui,et al.  Mechanical properties of high-strength bolts after fire , 2012 .

[11]  Abdelrahim K. Dessouki,et al.  Behavior of I-beam bolted extended end-plate moment connections , 2013 .

[12]  Sayed A. Nassar,et al.  Handbook of bolts and bolted joints , 1998 .

[13]  Yong Wang,et al.  The safety of common steel beam/column connections in fire , 2010 .

[14]  Archibald N. Sherbourne,et al.  Finite Element Prediction of End Plate Bolted Connection Behavior. II: Analytic Formulation , 1997 .

[15]  Ian Burgess,et al.  Multi-Scale Modelling of Flexible End Plate Connections under Fire Conditions , 2010 .

[16]  Ulrike Kuhlmann,et al.  Rotation Capacity of Steel Joints: Verification Procedure and Component Tests , 2000 .

[17]  Yan-Shin Shih,et al.  A study of the helical effect on the thread connection by three dimensional finite element analysis , 1999 .

[18]  Jean-Marc Franssen,et al.  Behaviour of Grade 8.8 bolts under natural fire conditions—Tests and model , 2011 .

[19]  Archibald N. Sherbourne,et al.  3D simulation of bolted connections to unstiffened columns—II. Extended endplate connections , 1996 .

[20]  Lucy Johnson.  Microstructural Characterisation of Structural Bolt Assemblies in Fire , 2014 .