Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete
暂无分享,去创建一个
A. Hanif | M. Usman | M. Shah | A. Ali | Muhammad Qasim Faizan | In-Ho Kim | Raja Dilawar Riaz | Umair Jalil Malik | Syed Baqar Abbas
[1] R. Kurda,et al. Artificial neural networks (ANN), MARS, and adaptive network-based fuzzy inference system (ANFIS) to predict the stress at the failure of concrete with waste steel slag coarse aggregate replacement , 2023, Neural Computing and Applications.
[2] M. Moradi,et al. Application of Machine Learning to Predict the Mechanical Characteristics of Concrete Containing Recycled Plastic-Based Materials , 2023, Applied Sciences.
[3] A. Kashani,et al. Nozzle criteria for enhancing extrudability, buildability and interlayer bonding in 3D printing concrete , 2023, Automation in Construction.
[4] Y. Xie,et al. Enhancement of 3D printed cementitious composite by short fibers: A review , 2023, Construction and Building Materials.
[5] M. B. Dowlatshahi,et al. Predictive model for shear strength estimation in reinforced concrete beams with recycled aggregates using Gaussian process regression , 2022, Neural Computing and Applications.
[6] J. Konkol,et al. Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly Ash , 2022, Polymers.
[7] B. Panda,et al. Printability, Thermal and Compressive Strength Properties of Cementitious Materials: A Comparative Study with Silica Fume and Limestone , 2022, Materials.
[8] F. Rehman,et al. ANN based predictive mimicker for mechanical and rheological properties of eco-friendly geopolymer concrete , 2022, Case Studies in Construction Materials.
[9] Mustafa Musa Jaber,et al. Prediction of strength and analysis in self-compacting concrete using machine learning based regression techniques , 2022, Adv. Eng. Softw..
[10] X. Guan,et al. Effects of rheological properties and printing speed on molding accuracy of 3D printing basalt fiber cementitious materials , 2022, Journal of Materials Research and Technology.
[11] Moses Karakouzian,et al. Predictive models for concrete properties using machine learning and deep learning approaches: A review , 2022, Journal of Building Engineering.
[12] Senthil Kumar Kaliyavaradhan,et al. Test methods for 3D printable concrete , 2022, Automation in Construction.
[13] G. Bai,et al. Hardened properties of 3D printed concrete with recycled coarse aggregate , 2022, Cement and Concrete Research.
[14] A. Rasheed,et al. Machine Learning-Based Fragility Assessment of Reinforced Concrete Buildings , 2022, Computational intelligence and neuroscience.
[15] S. Nazar,et al. Comparative Study of Evolutionary Artificial Intelligence Approaches to Predict the Rheological Properties of Fresh Concrete , 2022, Materials Today Communications.
[16] M. Shah,et al. Experimental Investigation of Concrete Properties using Locally available Coarse Aggregates in Punjab, Pakistan , 2022, NUST Journal of engineering sciences.
[17] M. Mahdal,et al. Accurate Estimation of Tensile Strength of 3D Printed Parts Using Machine Learning Algorithms , 2022, Processes.
[18] B. Šavija,et al. Convolutional neural network for predicting crack pattern and stress-crack width curve of air-void structure in 3D printed concrete , 2022, Engineering Fracture Mechanics.
[19] N. Banthia,et al. Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process , 2022, Journal of Building Engineering.
[20] A. Gholampour,et al. Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review , 2022, Automation in Construction.
[21] C. Ouellet-Plamondon,et al. Artificial neural network for the prediction of the fresh properties of cementitious materials , 2022, Cement and Concrete Research.
[22] Wenliang Sun,et al. Modification Effect of Nanosilica and Polypropylene Fiber for Extrusion-Based 3d Printing Concrete: Printability and Mechanical Anisotropy , 2022, SSRN Electronic Journal.
[23] V. Ananikov,et al. Integration of thermal imaging and neural networks for mechanical strength analysis and fracture prediction in 3D-printed plastic parts , 2022, Scientific Reports.
[24] Xiaoshan Lin,et al. A review of formwork systems for modern concrete construction , 2022, Structures.
[25] Aso A. Abdalla,et al. Surrogate Models to Predict the Long-Term Compressive Strength of Cement-Based Mortar Modified with Fly Ash , 2022, Archives of Computational Methods in Engineering.
[26] Hafidi Alaoui Adil,et al. Prediction of compressive strength of self-compacting concrete using four machine learning technics , 2022, Materials Today: Proceedings.
[27] Q. Zhang,et al. Shotcrete based 3D concrete printing: State of art, challenges, and opportunities , 2022, Construction and Building Materials.
[28] P. Chindaprasirt,et al. Effect of synthetic microfiber and viscosity modifier agent on layer deformation, viscosity, and open time of cement mortar for 3D printing application , 2022, Construction and Building Materials.
[29] Jian Hui Lim,et al. Extrudable region parametrical study of 3D printable concrete using recycled glass concrete , 2022, Journal of Building Engineering.
[30] Lin Song,et al. Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure , 2022, Construction and Building Materials.
[31] S. A. Masjuki,et al. Machine Learning Model to Predict Slump, VEBE and Compaction Factor of M Sand and Shredded Pet Bottles Concrete , 2022 .
[32] D. Samaras,et al. Self Pre-training with Masked Autoencoders for Medical Image Analysis , 2022, ArXiv.
[33] Y. Zhao,et al. The Influence of Polypropylene Fiber on the Working Performance and Mechanical Anisotropy of 3D Printing Concrete , 2021, Journal of Advanced Concrete Technology.
[34] Panuwat Joyklad,et al. Compressive strength prediction of fly ash-based geopolymer concrete via advanced machine learning techniques , 2021, Case Studies in Construction Materials.
[35] M. Tran,et al. Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing , 2021, Journal of Building Engineering.
[36] S. Czarnecki,et al. Evaluation of interlayer bonding in layered composites based on non-destructive measurements and machine learning: Comparative analysis of selected learning algorithms , 2021, Automation in Construction.
[37] J. Kruger,et al. Mechanical characterisation for numerical simulation of extrusion-based 3D concrete printing , 2021 .
[38] G. Gasparini,et al. Predicting Compressive Strength of 3D Printed Mortar in Structural Members Using Machine Learning , 2021, Applied Sciences.
[39] M. Hebda,et al. Hybrid Materials Based on Fly Ash, Metakaolin, and Cement for 3D Printing , 2021, Materials.
[40] T. Ding,et al. Fiber-reinforced mortar with 100% recycled fine aggregates: A cleaner perspective on 3D printing , 2021 .
[41] F. Aslani,et al. Development of fibre reinforced engineered cementitious composite using polyvinyl alcohol fibre and activated carbon powder for 3D concrete printing , 2021 .
[42] Chengqing Wu,et al. Mechanical anisotropy of ultra-high performance fibre-reinforced concrete for 3D printing , 2021, Cement and Concrete Composites.
[43] J. Sanjayan,et al. Digital fabrication of eco-friendly ultra-high performance fiber-reinforced concrete , 2021, Cement and Concrete Composites.
[44] V. Mechtcherine,et al. Mix design concepts for 3D printable concrete: A review , 2021 .
[45] J. Van Der Putten,et al. Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers , 2021, Materials.
[46] E. Nyarko,et al. Modeling of Compressive Strength of Self-Compacting Rubberized Concrete Using Machine Learning , 2021, Materials.
[47] A. Rehman,et al. 3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics , 2021, Materials.
[48] Yimiao Huang,et al. Fibre-reinforced lightweight engineered cementitious composites for 3D concrete printing , 2021 .
[49] J. Sanjayan,et al. Fiber orientation effects on ultra-high performance concrete formed by 3D printing , 2021 .
[50] V. Li,et al. 3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties , 2021 .
[51] Jiangtao Yu,et al. Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete , 2021 .
[52] Abdurrahman Özbeyaz,et al. A comparative investigation using machine learning methods for concrete compressive strength estimation , 2021 .
[53] Mahdi Hasanipanah,et al. Improving the performance of LSSVM model in predicting the safety factor for circular failure slope through optimization algorithms , 2021, Engineering with Computers.
[54] Iqbal H. Sarker. Machine Learning: Algorithms, Real-World Applications and Research Directions , 2021, SN Computer Science.
[55] M. Usman,et al. Utilization of Solid Waste from Brick Industry and Hydrated Lime in Self-Compacting Cement Pastes , 2021, Materials.
[56] Lex Reiter,et al. A 3D concrete printing prefabrication platform for bespoke columns , 2021 .
[57] Jianzhuang Xiao,et al. Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber , 2021 .
[58] Huu-Tai Thai,et al. Efficient machine learning models for prediction of concrete strengths , 2021, Construction and Building Materials.
[59] Aktham S. Alchaar,et al. Mechanical properties of 3D printed concrete in hot temperatures , 2021 .
[60] Zhi-Hua Zhou,et al. Machine Learning , 2021 .
[61] Geert De Schutter,et al. Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review , 2021 .
[62] T. Ding,et al. Printability and advantages of 3D printing mortar with 100% recycled sand , 2020 .
[63] Jun Ye,et al. A review of 3D printed concrete: Performance requirements, testing measurements and mix design , 2020, Construction and Building Materials.
[64] Guoqiang Li,et al. 3D printable biomimetic rod with superior buckling resistance designed by machine learning , 2020, Scientific Reports.
[65] Moncef L. Nehdi,et al. Machine learning prediction of mechanical properties of concrete: Critical review , 2020 .
[66] Jihun Park,et al. Buildability and Mechanical Properties of 3D Printed Concrete , 2020, Materials.
[67] Xiaolu Guo,et al. Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer , 2020 .
[68] Carolyn Conner Seepersad,et al. Additive Manufacturing Review: Early Past to Current Practice , 2020 .
[69] Jay G. Sanjayan,et al. Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction , 2020 .
[70] T. Tjahjowidodo,et al. Variable-geometry nozzle for surface quality enhancement in 3D concrete printing , 2020 .
[71] Jianzhuang Xiao,et al. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers , 2020 .
[72] C. Cremona,et al. Formulation of mix design for 3D printing of geopolymers: a machine learning approach , 2020, Materials Advances.
[73] G. D. Goh,et al. A review on machine learning in 3D printing: applications, potential, and challenges , 2020, Artificial Intelligence Review.
[74] Jianzhuang Xiao,et al. Mechanical behavior of 3D printed mortar with recycled sand at early ages , 2020 .
[75] M. Santhanam,et al. Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating Admixture on Surface , 2020 .
[76] Shazim Ali Memon,et al. Emerging trends in the growth of structural systems for tall buildings , 2020 .
[77] A. Viloria,et al. Estimating strength properties of geopolymer self-compacting concrete using machine learning techniques , 2020, Journal of Materials Research and Technology.
[78] G. Ma,et al. Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: Experiments and molecular dynamics studies , 2020 .
[79] Yu Wang,et al. Hardened properties of layered 3D printed concrete with recycled sand , 2020 .
[80] Avinash Nair,et al. Additive Manufacturing of Concrete: Challenges and opportunities , 2020, IOP Conference Series: Materials Science and Engineering.
[81] Erik Schlangen,et al. Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture , 2020, Cement and Concrete Research.
[82] Kamal Kant Hiran,et al. Machine Learning and Deep Learning in Real-Time Applications , 2020 .
[83] Yuan Gao,et al. FABRICATION AND APPLICATION OF 3D-PRINTED CONCRETE STRUCTURAL COMPONENTS IN THE BAOSHAN PEDESTRIAN BRIDGE PROJECT , 2020 .
[84] E. Nainar,et al. Concrete Technology , 2020 .
[85] Second RILEM International Conference on Concrete and Digital Fabrication , 2020, RILEM Bookseries.
[86] V. Li,et al. Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC/SHCC) , 2020 .
[87] K. Poologanathan,et al. Effect of Polypropylene Fibres on the Mechanical Properties of Extrudable Cementitious Material , 2020 .
[88] M. Santhanam,et al. Mechanical characterization of 3D printable concrete , 2019 .
[89] Riaan Combrinck,et al. Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water , 2019, Construction and Building Materials.
[90] Jinlong Pan,et al. Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction , 2019, Materials & Design.
[91] Ming Jen Tan,et al. Printability region for 3D concrete printing using slump and slump flow test , 2019, Composites Part B: Engineering.
[92] Michail Papachristoforou,et al. Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance , 2019, Frattura ed Integrità Strutturale.
[93] Muhammad Usman,et al. Self-Consolidating Lightweight Concrete Incorporating Limestone Powder and Fly Ash as Supplementary Cementing Material , 2019, Materials.
[94] K. Khayat,et al. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content , 2019, Cement and Concrete Research.
[95] M. Usman,et al. Blast Loading Response of Reinforced Concrete Panels Externally Reinforced with Steel Strips , 2019, Infrastructures.
[96] Lieyun Ding,et al. Volume-forming 3D concrete printing using a variable-size square nozzle , 2019, Automation in Construction.
[97] Ming Jen Tan,et al. Mechanical properties and deformation behaviour of early age concrete in the context of digital construction , 2019, Composites Part B: Engineering.
[98] Ming Jen Tan,et al. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay , 2019, Composites Part B: Engineering.
[99] Robert X. Gao,et al. Deep learning-based tensile strength prediction in fused deposition modeling , 2019, Comput. Ind..
[100] Gabriel Dulac-Arnold,et al. Challenges of Real-World Reinforcement Learning , 2019, ArXiv.
[101] A. Perrot,et al. Mechanical Behavior of 3D Printed Cement Materials , 2019, 3D Printing of Concrete.
[102] Fang Wang,et al. Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing , 2019, Construction and Building Materials.
[103] Manu Santhanam,et al. 3D printable concrete: Mixture design and test methods , 2019, Cement and Concrete Composites.
[104] Ming Jen Tan,et al. Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application , 2019, Materials Letters.
[105] A. Perrot. 3D printing of concrete : state of the art and challenges of the digital construction revolution , 2019 .
[106] Robert J. Flatt,et al. First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018 , 2019, RILEM Bookseries.
[107] Ming Jen Tan,et al. Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing , 2018, Cement and Concrete Composites.
[108] Richard A. Buswell,et al. 3D printing using concrete extrusion: A roadmap for research , 2018, Cement and Concrete Research.
[109] Christopher K.Y. Leung,et al. Impact of 3D Printing Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC) , 2018, RILEM Bookseries.
[110] Bryan T. Adey,et al. Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall , 2018, Automation in Construction.
[111] S. Rizwan,et al. Eco-friendly self-compacting cement pastes incorporating wood waste as cement replacement: A feasibility study , 2018, Journal of Cleaner Production.
[112] Quang-Cuong Pham,et al. Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement , 2018, Construction and Building Materials.
[113] F. Preston,et al. Making Concrete Change Innovation in Low-carbon Cement and Concrete , 2018 .
[114] Ming Xia,et al. Effect of surface moisture on inter-layer strength of 3D printed concrete , 2018 .
[115] M. Shoukath Ali,et al. Effectiveness of hair and wave polypropylene fibers for concrete roads , 2018 .
[116] M. Papachristoforou,et al. Evaluation of workability parameters in 3D printing concrete , 2018 .
[117] Ming Jen Tan,et al. Fresh and hardened properties of 3D printable cementitious materials for building and construction , 2018 .
[118] B. Panda,et al. Measurement of tensile bond strength of 3D printed geopolymer mortar , 2018 .
[119] Ming Jen Tan,et al. Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material , 2017 .
[120] K. M. Liew,et al. Green concrete: Prospects and challenges , 2017 .
[121] Shouxiang Wang,et al. A Novel Method of Statistical Line Loss Estimation for Distribution Feeders Based on Feeder Cluster and Modified XGBoost , 2017 .
[122] Abbas M. Abd,et al. Modelling the strength of lightweight foamed concrete using support vector machine (SVM) , 2017 .
[123] 이종구. Ultra-High Performance Concrete UHPC , 2017 .
[124] Mohammed Sonebi,et al. Modelling the fresh properties of self-compacting concrete using support vector machine approach , 2016 .
[125] Shamil Naoum,et al. Factors influencing labor productivity on construction sites , 2016 .
[126] Ronald M. Summers,et al. Deep Convolutional Neural Networks for Computer-Aided Detection: CNN Architectures, Dataset Characteristics and Transfer Learning , 2016, IEEE Transactions on Medical Imaging.
[127] Shan Suthaharan,et al. Machine Learning Models and Algorithms for Big Data Classification , 2016 .
[128] Ayon Dey,et al. Machine Learning Algorithms : A Review , 2016 .
[129] Shan Suthaharan,et al. Machine Learning Models and Algorithms for Big Data Classification: Thinking with Examples for Effective Learning , 2015 .
[130] Mark Ebden,et al. Gaussian Processes: A Quick Introduction , 2015, 1505.02965.
[131] Esko Sistonen,et al. Prediction of concrete carbonation depth using decision trees , 2015, ESANN.
[132] Ekkehard Fehling,et al. Ultra High Performance Concrete (UHPC) , 2014 .
[133] K. Khayat,et al. Mixture Design and Testing of Fiber-Reinforced Self‑Consolidating Concrete , 2014 .
[134] Rosli Mohamad Zin,et al. A Review of Self-healing Concrete Research Development , 2014 .
[135] C Scollard,et al. Design of the New NY (Tappan Zee) Bridge Cable-Stayed Main Span , 2014 .
[136] Pierino Lestuzzi,et al. Damage prediction for regular reinforced concrete buildings using the decision tree algorithm , 2014 .
[137] Halil Ibrahim Erdal. Two-level and hybrid ensembles of decision trees for high performance concrete compressive strength prediction , 2013, Eng. Appl. Artif. Intell..
[138] Nemkumar Banthia,et al. concrete in precast concrete applications: Research leads to innovative products , 2012 .
[139] A. Gibb,et al. Hardened properties of high-performance printing concrete , 2012 .
[140] T. T. Le,et al. Mix design and fresh properties for high-performance printing concrete , 2012 .
[141] Sotiris B. Kotsiantis,et al. Decision trees: a recent overview , 2011, Artificial Intelligence Review.
[142] Jui-Sheng Chou,et al. Optimizing the Prediction Accuracy of Concrete Compressive Strength Based on a Comparison of Data-Mining Techniques , 2011, J. Comput. Civ. Eng..
[143] Veera Lertchirakarn,et al. Setting time and flowability of accelerated Portland cement mixed with polycarboxylate superplasticizer. , 2011, Journal of endodontics.
[144] Marek Słoński,et al. Bayesian neural networks and Gaussian processes in identification of concrete properties , 2011 .
[145] Craig M. Newtson,et al. Ultra-High Strength Concrete Mixtures Using Local Materials , 2011 .
[146] H. Patil,et al. Geopolymer concrete A green concrete , 2010, 2010 2nd International Conference on Chemical, Biological and Environmental Engineering.
[147] Caijun Shi,et al. Prediction of elastic modulus of normal and high strength concrete by support vector machine , 2010 .
[148] Carl E. Rasmussen,et al. Gaussian processes for machine learning , 2005, Adaptive computation and machine learning.
[149] R. K. Agarwal,et al. Concrete and its quality , 2009 .
[150] John T Harvey,et al. New perspectives on maturity method and approach for high performance concrete applications , 2008 .
[151] Alun Thomas,et al. Sprayed Concrete Lined Tunnels , 2008 .
[152] Carl Kingsford,et al. What are decision trees? , 2008, Nature Biotechnology.
[153] S. Mindess. Developments in the Formulation and Reinforcement of Concrete , 2008 .
[154] Lai Ming,et al. Nonlinear structural response prediction based on support vector machines , 2008 .
[155] Surendra M. Gupta,et al. Support Vector Machines based Modelling of Concrete Strength , 2008 .
[156] Ovidiu Ivanciuc,et al. Applications of Support Vector Machines in Chemistry , 2007 .
[157] William Stafford Noble,et al. Support vector machine , 2013 .
[158] P. K. Mehta,et al. Concrete: Microstructure, Properties, and Materials , 2005 .
[159] Vojislav Kecman,et al. Support Vector Machines – An Introduction , 2005 .
[160] S. Chandra,et al. Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars—Part I , 2002 .
[161] J. Friedman. Greedy function approximation: A gradient boosting machine. , 2001 .
[162] D. Bhatt. Rapid Hardening Concrete , 2000 .
[163] H. Randolph Thomas,et al. Role of the Fabricator in Labor Productivity , 2000 .
[164] Pierre-Claude Aitcin,et al. Cements of yesterday and today Concrete of tomorrow , 2000 .
[165] S. Agatonovic-Kustrin,et al. Basic concepts of artificial neural network (ANN) modeling and its application in pharmaceutical research. , 2000, Journal of pharmaceutical and biomedical analysis.
[166] A Pierre Claude,et al. CEMENTS OF YESTERDAY AND TODAY CONCRETE OF TOMORROW , 2000 .
[167] Per Tveit,et al. Ideas on downward arched and other underwater concrete tunnels , 2000 .
[168] P. K. Mehta,et al. ADVANCEMENTS IN CONCRETE TECHNOLOGY , 1999 .
[169] Vesa Penttala,et al. Concrete and Sustainable Development , 1997 .
[170] Yoram Reich,et al. Machine Learning Techniques for Civil Engineering Problems , 1997 .
[171] R. F. Zollo. Fiber-reinforced concrete: An overview after 30 years of development , 1997 .
[172] Hani G. Melhem,et al. MACHINE LEARNING AND ITS APPLICATION TO CIVIL ENGINEERING SYSTEMS , 1996 .
[173] C. T. Thornton,et al. High-Strength Concrete for High-Rise towers , 1994, "SP-149: High-Performance Concrete - Proceedings, International Conference Singapore, 1994".
[174] J. L. Clarke,et al. Structural lightweight aggregate concrete , 1993 .
[175] K. Høeg,et al. Asphaltic Concrete Cores for Embankment Dams , 1993 .
[176] P. K. Mehta. Durability of Concrete--Fifty Years of Progress? , 1991, "SP-126: Durability of Concrete: Second International Conference, Montreal, Canada 1991".
[177] Robert A. Sobieszek. Sculpture as the Sum of its Profiles: François Willème and Photosculpture in France, 1859–1868 , 1980 .
[178] W. P. Strassmann,et al. The Construction Sector in Economic Development , 1970 .
[179] H. Woods. Durability of concrete construction , 1968 .