Role of ITO and PEDOT:PSS in stability/degradation of polymer:fullerene bulk heterojunctions solar cells

Abstract Two polymers:fullerene bulk heterojunction solar cells: [(I) poly[2-methoxy-5-(3,7-dimethyloctyloxy)]-1,4-phenylenevinylene (MDMO-PPV): methanofullerene phenyl-C 61 -butyric-acid-methyl-ester ([60]PCBM) and (II) poly(3-hexylthiophene-2,5-diyl), highly regioregular (P3HT): [60]PCBM] were studied. Indium tin oxide (ITO) and/or poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) were/was used as transparent electrode, and lithium fluoride (LiF) was used as buffer layer for aluminium cathode. The role of ITO and PEDOT:PSS on the current–tension characteristics, on open circuit voltage V oc , and on density of short-circuit current J sc was investigated for the two polymers:PCBM blend solar cells as deposited and after 40 days ageing.

[1]  F. Krebs,et al.  Bulk Heterojunctions Based on Native Polythiophene , 2008 .

[2]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[3]  Andreas Schüler,et al.  Nanostructured materials for solar energy conversion , 2005 .

[4]  Karl Leo,et al.  Organic solar cells on indium tin oxide and aluminum doped zinc oxide anodes , 2007 .

[5]  Kion Norrman,et al.  Water-induced degradation of polymer solar cells studied by H2(18)O labeling. , 2009, ACS applied materials & interfaces.

[6]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[7]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[8]  F. Krebs.  Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes , 2008 .

[9]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[10]  F. Krebs,et al.  Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices , 2005 .

[11]  Gang Li,et al.  Accurate Measurement and Characterization of Organic Solar Cells , 2006 .

[12]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[13]  R. W. Gymer,et al.  Indium diffusion in model polymer light-emitting diodes , 2000 .

[14]  F. Krebs,et al.  Lifetimes of organic photovoltaics: Using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms , 2006 .

[15]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[16]  John R. Reynolds,et al.  A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules , 2009 .

[17]  F. Krebs,et al.  Oxygen Release and Exchange in Niobium Oxide MEHPPV Hybrid Solar Cells , 2006 .

[18]  André Moliton,et al.  Size effect on organic optoelectronics devices: Example of photovoltaic cell efficiency , 2008 .

[19]  William R. Salaneck,et al.  Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy , 1999 .

[20]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[21]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[22]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .

[23]  Oliver Ambacher,et al.  Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): Fullerene , 2005 .

[24]  Z. Kafafi,et al.  Work function measurements on indium tin oxide films , 2001 .

[25]  Donal D. C. Bradley,et al.  A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells , 2006 .

[26]  B. Servet,et al.  Stability/instability of conductivity and work function changes of ITO thin films, UV-irradiated in air or vacuum: Measurements by the four-probe method and by Kelvin force microscopy , 2001 .

[27]  N. E. Coates,et al.  Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing , 2007, Science.

[28]  Ole Hagemann,et al.  A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration , 2009 .

[29]  P. C. Chui,et al.  Improved performance of OLEDs with ITO surface treatments , 2005 .

[30]  Frederik C. Krebs,et al.  Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing , 2009 .

[31]  F. Krebs,et al.  Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing , 2007 .

[32]  F. Krebs,et al.  Thermocleavable Low Band Gap Polymers and Solar Cells Therefrom with Remarkable Stability toward Oxygen , 2008 .

[33]  Christoph J. Brabec,et al.  Characterization of Organic Solar Cells: the Importance of Device Layout , 2007 .