论文信息 - 3-D Catalytic Regeneration and Stress Modeling of Diesel Particulate Filters by ABAQUS FEM Software

3-D Catalytic Regeneration and Stress Modeling of Diesel Particulate Filters by ABAQUS FEM Software

The design of reliable DPF systems has proved a complex and demanding task that is increasingly being assisted by modeling. 1-D but also 2-D (axisymmetric) modeling has already been applied in design optimization case studies, with varying degrees of success. The introduction of advanced technology SiC and cordierite filters with modular structure and the need to accurately model transient temperature and stress fields in low space velocity scenarios, made necessary the shift to 3-D modeling. In this paper, 3-D modeling is carried out in an effective and reliable way, by interfacing a well-documented and validated 1-D model with the ABAQUS commercial FEM software. The new modeling methodology proves a powerful tool in the hands of the filter and diesel exhaust system design engineer.

Anastassios M. Stamatelos | G. N. Pontikakis | K. Bakasis | N. Aravas

[1] Anastassios M. Stamatelos,et al. Some Empirical Observations on Diesel Particulate Filter Modeling and Comparison Between Simulations and Experiments , 2000 .

[2] Anastassios M. Stamatelos,et al. Thermogravimetric analysis of soot emitted by a modern diesel engine run on catalyst-doped fuel , 2003 .

[3] Farhang Shadman,et al. Thermal regeneration of diesel-particulate monolithic filters , 1985 .

[4] Y. Miyairi,et al. Numerical Study on Forced Regeneration of Wall-Flow Diesel Particulate Filters , 2001 .

[5] Grigorios C. Koltsakis,et al. Modeling thermal regeneration of wall‐flow diesel particulate traps , 1996 .

[6] 岩本正和,et al. Applied Catalysis B: Environmental , 2020 .

[7] M. W. Vincent,et al. Combining Fuel Borne Catalyst, Catalytic Wash Coat and Diesel Particulate Filter , 2001 .

[8] John H. Johnson,et al. A 2-D Computational Model Describing the Heat Transfer, Reaction Kinetics and Regeneration Characteristics of a Ceramic Diesel Particulate Trap , 1998 .

[9] Anastassios M. Stamatelos,et al. Modeling Catalytic Regeneration of Wall-Flow Particulate Filters , 1996 .

[10] Grigorios C. Koltsakis,et al. Modes of Catalytic Regeneration in Diesel Particulate Filters , 1997 .

[11] Anastassios M. Stamatelos,et al. Modeling Catalytic Regeneration of Diesel Particulate Filters, Taking into Account Adsorbed Hydrocarbon Oxidation , 1999 .