Cutting Tool Materials and Tools

Tool change times, and with them both manufacturing times and tool, machine and labour costs, are affected by wear. Wear is affected in turn by the properties of the cutting tool materials. Development in the cutting tool material sector is therefore far from finished, but is constantly aiming both to improve cutting materials that are already established as well as to discover new materials for use in the manufacture of cutting tools.

[1]  H. Hausner.  Modern Developments in Powder Metallurgy , 2012 .

[2]  G. Gille.  Neue Vorstoffe für Zerspanwerkzeuge :Leitungssteigerung bei Hartmetallen und Cermets , 1995 .

[3]  Fritz Klocke,et al.  Untersuchungen zum Fräsen mit CVD-diamantbeschichteten Werkzeugen , 2004 .

[4]  M. Frank,et al.  CVD‐Diamant‐Dünnschichten nach dem Hot‐Filament‐Verfahren , 2005 .

[5]  G. Spriggs.  A history of fine grained hardmetal , 1995 .

[6]  E. Bergmann,et al.  Ion-plated titanium carbonitride films , 1990 .

[7]  E. Rudy.  Boundary phase stability and critical phenomena in higher order solid solution systems , 1973 .

[8]  D. T. Quinto,et al.  High Temperature microhardness of hard coatings produced by physical and chemical vapor deposition , 1987 .

[9]  D. Moskowitz,et al.  Cemented Titanium Carbide Cutting Tools , 1966 .

[10]  J. Halwax,et al.  CVD diamond tools machining aluminium in the new 5-Series BMWS , 2004 .

[11]  H. Grewe.  Keramische Werkstoffe zur Zerspanung , 1985 .

[12]  W. König,et al.  New Approaches to Characterizing the Performance of Coated Cutting Tools , 1992 .

[13]  H. Takei,et al.  Physical vapor deposition of chromium and titanium nitrides by the hollow cathode discharge process , 1978 .

[14]  Toshimichi Moriwaki,et al.  Ultraprecision Metal Cutting — The Past, the Present and the Future , 1991 .

[15]  W. König,et al.  Einfluß von Aufbau und Eigenschaften hochharter nichtmetallischer Schneidstoffe auf Leistung und Verschleiß im Zerspanprozeß mit geometrisch definierter Schneide , 1995 .

[16]  U. Schleinkofer,et al.  Doped CVD Al2O3 coatings for high performance cutting tools , 2003 .

[17]  Walter Eversheim,et al.  Wettbewerbsfaktor Produktionstechnik : Aachener Perspektiven , 1996 .

[18]  R. Dieckmann,et al.  H. Salmang, H. Scholze: Keramik – Teil 1: Allgemeine Grundlagen und wichtige Eigenschaften, 6. verbesserte und erweiterte Auflage, Springer Verlag, Berlin‐Heidelberg‐New York. 308 Seiten, Preis: DM 138,– , 1982 .

[19]  V. Wick,et al.  Eight million sensor housings finish machined per year with PCD , 2004 .

[20]  W. Münz,et al.  Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum , 1987 .

[21]  Γεωργιοσ Χρυσολουρησ.  EINSATZ HOCHHARTER POLYKRISTALLINER SCHNEIDSTOFFE ZUM DREHEN UND FRASEN , 1979 .

[22]  Fritz Klocke,et al.  Manufacturing Processes 2: Grinding, Honing, Lapping , 2009 .

[23]  N. Claussen.  Strengthening strategies for ZrO2-toughened ceramics at high temperatures , 1985 .

[24]  Klaus Dreyer,et al.  Submicron and ultrafine grained hardmetals for microdrills and metal cutting inserts , 2002 .

[25]  P. Beiss,et al.  Sintering Behaviour and Performance Data of High Speed Steel Components , 1986 .

[26]  Fritz Klocke,et al.  Grinding, honing, lapping , 2010 .

[27]  Gerry Byrne,et al.  The performance of PCBN in hard turning , 2005 .

[28]  J. Kassack.  Finish machining Audi GJV cylinder bores with PCD tools , 2004 .

[29]  G. Richter,et al.  NEUE ENTWICKLUNGEN UND ANWENDUNGEN BEI SCHNEIDKERAMIK , 1999 .