Materials recovery from waste printed circuit boards by supercritical methanol.

The recovery of valuable materials from waste printed circuit boards (PCBs) is quite difficult due to the heterogeneous mix of polymer materials, multiple kinds of metals and glass fiber. A feasibility study was conducted using supercritical methanol (SCM) to simultaneously recover polymers and metals from waste PCBs. The study focused on the characteristics of both oils and solid products obtained from the SCM-treated waste PCBs. The operation conditions were temperature range of 300-420 degrees C, treatment time between 30 and 120 min and solid-to-liquid ratio (S/L) of 1:10-1:30 (g/mL) so as to understand the products and depolymerization mechanisms of waste PCBs in SCM. GC-MS results revealed that the oils mainly contained phenol and its methylated derivatives, and the methylated derivatives increased with the increase of reaction temperature. The methylated reaction occurred mainly above 400 degrees C. The liquid products also contained a significant number of phosphated fire retardant additives such as triphenyl phosphate, which decreased significantly with the increase of reaction temperature. The solid product mainly consisted of Cu, Fe, Sn, Pb and Zn, as well as lower concentrations of precious metals such as Ag and Au.

[1]  Youn-Woo Lee,et al.  A kinetic study of the decross-linking of cross-linked polyethylene in supercritical methanol , 2008 .

[2]  M. Goto,et al.  DEPOLYMERIZATION OF PRINTED CIRCUIT BOARD IN NEAR-CRITICAL WATER , 2003 .

[3]  Zhenming Xu,et al.  Recycling of non-metallic fractions from waste printed circuit boards: a review. , 2009, Journal of hazardous materials.

[4]  Gerhard Emig,et al.  Chemical Recycling of Polymer Materials , 1998 .

[5]  Fu-Shen Zhang,et al.  Electrokinetic recovery of Cd, Cr, As, Ni, Zn and Mn from waste printed circuit boards: effect of assisting agents. , 2009, Journal of hazardous materials.

[6]  M. Goto,et al.  Supercritical methanol for polyethylene terephthalate depolymerization: observation using simulator. , 2007, Waste management.

[7]  Kuen-Song Lin,et al.  Oxidation of printed circuit board wastes in supercritical water , 2000 .

[8]  Guo-Ping Chang-Chien,et al.  Inhibition of polybrominated dibenzo-p-dioxin and dibenzofuran formation from the pyrolysis of printed circuit boards. , 2007, Environmental science & technology.

[9]  Jia Li,et al.  Recycle technology for recovering resources and products from waste printed circuit boards. , 2007, Environmental science & technology.

[10]  Guan Jie,et al.  Product characterization of waste printed circuit board by pyrolysis , 2008 .

[11]  I. Marco,et al.  Pyrolysis of electrical and electronic wastes , 2008 .

[12]  Valerio Cozzani,et al.  Thermal Degradation and Decomposition Products of Electronic Boards Containing BFRs , 2005 .

[13]  H. Yoshida,et al.  Effective recovery of harmful metal ions from squid wastes using subcritical and supercritical water treatments. , 2005, Environmental science & technology.

[14]  Keqiang Qiu,et al.  A new technology for recycling materials from waste printed circuit boards. , 2010, Journal of hazardous materials.

[15]  Guido Grause,et al.  Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards. , 2008, Chemosphere.

[16]  Fu-Shen Zhang,et al.  A novel process utilizing subcritical water and nitrilotriacetic acid to extract hazardous elements from MSW incinerator fly ash. , 2006, Science of the Total Environment.

[17]  Fu-Shen Zhang,et al.  Recovery of copper and lead from waste printed circuit boards by supercritical water oxidation combined with electrokinetic process. , 2009, Journal of hazardous materials.

[18]  Jun-ichi Ozaki,et al.  Chemical recycling of phenol resin by supercritical methanol , 2000 .

[19]  J. Kadokawa,et al.  Decomposition reactions of epoxy resin and polyetheretherketone resin in sub- and supercritical water , 2004 .

[20]  Motonobu Goto,et al.  Chemical recycling of plastics using sub- and supercritical fluids , 2009 .

[21]  Valerio Cozzani,et al.  Formation of hydrogen bromide and organobrominated compounds in the thermal degradation of electronic boards , 2006 .

[22]  Shafiq Alam,et al.  Recovery of high purity copper cathode from printed circuit boards using ammoniacal sulfate or chloride solutions , 2007 .

[23]  Paul T. Williams,et al.  Separation and recovery of materials from scrap printed circuit boards , 2007 .

[24]  Stephen Pickering,et al.  Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions , 2008 .

[25]  E. Muniz,et al.  Depolymerization of poly(ethylene terephthalate) wastes using ethanol and ethanol/water in supercritical conditions , 2006 .

[26]  Fu-Shen Zhang,et al.  Influence of supercritical water treatment on heavy metals in medical waste incinerator fly ash , 2009, Journal of Hazardous Materials.

[27]  Martin Schlummer,et al.  Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management. , 2007, Chemosphere.

[28]  J. Kadokawa,et al.  Decomposition of Prepolymers and Molding Materials of Phenol Resin in Subcritical and Supercritical Water under an Ar Atmosphere , 1999 .

[29]  L Petarca,et al.  Comparative environmental analysis of waste brominated plastic thermal treatments. , 2009, Waste management.

[30]  Sheng Zhong,et al.  Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards. , 2010, Journal of hazardous materials.