Finite Spherical Cavity Expansion Method for Layering Effect

A decay function for the layering effect during the projectile penetrating into layered targets is constructed, which is obtained via the theoretical solution of a dynamically expanding layered spherical cavity with finite radius in the layered targets that are assumed to be incompressible Mohr-Coulomb materials. By multiplying the decay function with the semi-empirical forcing functions that account for all the constitutive behavior of the targets, the forcing functions for the layered targets are obtained. Then, the forcing functions are used to represent the targets and are applied on the projectile surface as the pressure boundary condition where the projectile is modeled by an explicit transient dynamic finite element code. This methodology is implemented into ABAQUS explicit solver via the user subroutine VDLOAD, which eliminates the need for discretizing the targets and the need for the complex contact algorithm. In order to verify the proposed layering effect model, depth-of-penetration experiments of the 37 mm hard core projectile penetrating into three sets of fiber concrete and soil layered targets are conducted. The predicted depths of penetration show good agreement with the experimental data. Furthermore, the influence of layering effect on projectile trajectory during earth penetration is investigated. It is found that the layering effect should be taken into account if the final position and trajectory of the projectile are the main concern.

[1]  M. J. Forrestal,et al.  Dynamic Spherical Cavity-Expansion in a Compressible Elastic-Plastic Solid , 1988 .

[2]  A. N. Dancygier,et al.  Effect of reinforcement ratio on the resistance of reinforced concrete to hard projectile impact , 1997 .

[3]  Thomas A. Duffey,et al.  Finite cavity expansion method for near-surface effects and layering during earth penetration , 1998 .

[4]  Jan Arild Teland,et al.  Penetration into concrete by truncated projectiles , 2004 .

[5]  M. J. Forrestal,et al.  Penetration of concrete targets with ogive-nose steel rods , 1998 .

[6]  Thomas L. Warren,et al.  Penetration of limestone targets by ogive-nosed VAR 4340 steel projectiles at oblique angles: experiments and simulations , 2004 .

[7]  M. J. Forrestal,et al.  Penetration into soil targets , 1992 .

[8]  Mazen R. Tabbara,et al.  Simulations of the Penetration of 6061-T6511 Aluminum Targets by Spherical-Nosed VAR 4340 Steel Projectiles , 2000 .

[9]  Robert S. Bernard,et al.  Non-normal impact and penetration. Analysis for hard targets and small angles of attack. Final report , 1978 .

[10]  Qingming Li,et al.  Hard projectile penetration and trajectory stability , 2011 .

[11]  T. L. Warren,et al.  Penetration of 6061-T6511 aluminum targets by ogive-nosed VAR 4340 steel projectiles at oblique angles: experiments and simulations , 2001 .

[12]  B. S. Altman,et al.  An empirical equation for penetration depth of ogive-nose projectiles into concrete targets , 1994 .

[13]  N. S. Brar,et al.  PENETRATION OF GROUT AND CONCRETE TARGETS WITH OGIVE-NOSE STEEL PROJECTILES , 1996 .

[14]  M. J. Forrestal,et al.  Penetration Experiments with Limestone Targets and Ogive-Nose Steel Projectiles , 2000 .

[15]  Qin Fang,et al.  Prediction of Projectile Penetration and Perforation by Finite Cavity Expansion Method with the Free-Surface Effect , 2014 .

[16]  Thomas L. Warren.  Simulations of the penetration of limestone targets by ogive-nose 4340 steel projectiles , 2002 .

[17]  D. Tzou,et al.  A spherical cavity-expansion penetration model for concrete targets , 1997 .