Characterisation of thermoset laminates for cosmetic automotive applications: Part III - Shrinkage control via nanoscale reinforcement

[1]  E. Lester,et al.  Characterisation of thermoset laminates for cosmetic automotive applications: Part II – Cure and residual volatile assessment , 2006 .

[2]  K. N. Kendall,et al.  Characterisation of thermoset laminates for cosmetic automotive applications: Part I – Surface characterisation , 2006 .

[3]  Tianxi Liu,et al.  Nanoindentation and morphological studies on nylon 66 nanocomposites. I. Effect of clay loading , 2004 .

[4]  Darren J. Martin,et al.  Morphology and properties of thermoplastic polyurethane nanocomposites incorporating hydrophilic layered silicates , 2004 .

[5]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[6]  U. Yilmazer,et al.  Synthesis and mechanical properties of unsaturated polyester based nanocomposites , 2003 .

[7]  A. Gu,et al.  Thermal degradation behaviour and kinetic analysis of epoxy/montmorillonite nanocomposites , 2003 .

[8]  P. Dubois,et al.  Poly(epsilon-caprolactone)/clay nanocomposites by in-situ intercalative polymerization catalyzed by dibutyltin dimethoxide , 2002 .

[9]  T. Kotaka,et al.  The effect of crystallization on the structure and morphology of polypropylene/clay nanocomposites , 2002 .

[10]  David P. Anderson,et al.  Morphology development in layered silicate thermoset nanocomposites , 2002 .

[11]  R. Bharadwaj,et al.  Structure–property relationships in cross-linked polyester–clay nanocomposites , 2002 .

[12]  C. Ha,et al.  Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites , 2002 .

[13]  Tsutomu Takeichi,et al.  Studies on thermal and mechanical properties of polyimide-clay nanocomposites , 2001 .

[14]  U. Yilmazer,et al.  Mechanical Properties of Unsaturated Polyester / Montmorillonite Composites , 2001 .

[15]  Rao Tummala,et al.  Integral passives for next generation of electronic packaging: application of epoxy/ceramic nanocomposites as integral capacitors , 2001 .

[16]  Thomas J. Pinnavaia,et al.  Polymer-clay nanocomposites , 2000 .

[17]  E. Giannelis,et al.  Nanocomposites based on montmorillonite and unsaturated polyester , 1998 .

[18]  Lee Wook Jang,et al.  Characterization of epoxy–clay hybrid composite prepared by emulsion polymerization , 1998 .

[19]  Yan-Jyi Huang,et al.  Volume shrinkage characteristics in the cure of low-shrink unsaturated polyester resins , 1996 .

[20]  Emmanuel P. Giannelis,et al.  Polymer Layered Silicate Nanocomposites , 1996 .

[21]  George Tsagaropoulos,et al.  Dynamic Mechanical Study of the Factors Affecting the Two Glass Transition Behavior of Filled Polymers. Similarities and Differences with Random Ionomers , 1995 .

[22]  L. J. Lee,et al.  Dilatometric study of low profile unsaturated polyester resins , 1995 .

[23]  C. Su,et al.  Effects of poly(vinyl acetate) and poly(methyl methacrylate) low-profile additives on the curing of unsaturated polyester resins. I. Curing kinetics by DSC and FTIR , 1995 .

[24]  L. J. Lee,et al.  Shrinkage behaviour of low-profile unsaturated polyester resins , 1994 .

[25]  Toshio Kurauchi,et al.  Mechanical properties of nylon 6-clay hybrid , 1993 .

[26]  Roberto J. J. Williams,et al.  Cure of unsaturated polyester resins: 2. Influence of low-profile additives and fillers on the polymerization reaction, mechanical properties and surface rugosities , 1993 .

[27]  L. J. Lee,et al.  Development of a dilatometer and its application to low-shrink unsaturated polyester resins , 1992 .

[28]  L. J. Lee,et al.  Structure formation during the copolymerization of styrene and unsaturated polyester resin , 1991 .

[29]  C. Bucknall,et al.  Mechanism of shrinkage control in polyester resins containing low-profile additives , 1991 .

[30]  Chris Chatfield,et al.  Statistics for Technology (A Course in Applied Statistics) , 1984 .