DISTURBANCE COMPENSATION FOR TIME‐DELAY PROCESSES
暂无分享,去创建一个
Min-Sen Chiu | Min Liu | Qing-Guo Wang | Yong Zhang | Qing‐Guo Wang | M. Chiu | Min Liu | Yong Zhang
[1] S. Hara,et al. Repetitive control system: a new type servo system for periodic exogenous signals , 1988 .
[2] Carl J. Kempf,et al. Disturbance observer and feedforward design for a high-speed direct-drive positioning table , 1999, IEEE Trans. Control. Syst. Technol..
[3] Karl Johan Åström,et al. PID Controllers: Theory, Design, and Tuning , 1995 .
[4] Ed Tittel. Schaum's outline of theory and problems of XML , 2002 .
[5] Julio E. Normey-Rico,et al. Control of integral processes with dead-time. Part 1: Disturbance observer-based 2DOF control scheme , 2002 .
[6] Murray R. Spiegel,et al. Schaum's outline of theory and problems of laplace transforms , 1965 .
[7] Tong Heng Lee,et al. Internal stability of interconnected systems , 1999, IEEE Trans. Autom. Control..
[8] S. J. Mason. Feedback Theory-Further Properties of Signal Flow Graphs , 1956, Proceedings of the IRE.
[9] C. J. Kempf,et al. Discrete-time disturbance observer design for systems with time delay , 1996, Proceedings of 4th IEEE International Workshop on Advanced Motion Control - AMC '96 - MIE.
[10] D. P. Atherton,et al. Automatic tuning of optimum PID controllers , 1993 .
[11] Jay H. Lee,et al. Repetitive model predictive control applied to a simulated moving bed chromatography system , 2000 .
[12] Eugene Hecht,et al. Schaum's outline of theory and problems of optics , 1975 .
[13] William L. Luyben,et al. Process Modeling, Simulation and Control for Chemical Engineers , 1973 .
[14] Chang-Chieh Hang,et al. Robust identification of first-order plus dead-time model from step response , 1999 .
[15] Cheng-Liang Chen,et al. A modified Smith predictor with an approximate inverse of dead time , 1990 .
[16] Yoichi Hori,et al. Robust speed control of DC servomotors using modern two degrees-of-freedom controller design , 1991 .