Improved High-Frequency Magnetic Properties of Fesibccr Amorphous Soft Magnetic Composites by Adding Carbonyl Iron Powders

[1]  Jia-quan Zhang,et al.  Crystallization evolution behavior of amorphous Fe85.7Si7.9B3.6Cr2C0.8 powder produced by a novel atomization process , 2022, Journal of Non-Crystalline Solids.

[2]  J. Pang,et al.  Simulation and experiment investigations on fabrication of Fe-based amorphous powders by a novel atomization process equipped with assisted gas nozzles , 2022, Journal of Iron and Steel Research International.

[3]  Jia-quan Zhang,et al.  Fe-Based Amorphous Magnetic Powder Cores with Low Core Loss Fabricated by Novel Gas–Water Combined Atomization Powders , 2022, Materials.

[4]  Wanjiao Li,et al.  Hybrid amorphous soft magnetic composites with ultrafine FeSiBCr and submicron FeBP particles for MHz frequency power applications , 2022, Journal of Magnetism and Magnetic Materials.

[5]  Jia-quan Zhang,et al.  Study of Bulk Amorphous and Nanocrystalline Alloys Fabricated by High-Sphericity Fe84Si7B5C2Cr2 Amorphous Powders at Different Spark-Plasma-Sintering Temperatures , 2022, Materials.

[6]  B. Hong,et al.  FeSiCrB amorphous soft magnetic composites filled with Co2Z hexaferrites for enhanced effective permeability , 2021, Advanced Powder Technology.

[7]  D. Choi,et al.  Effect of the particle size classification of FeSiCrB amorphous soft magnetic composites to improve magnetic properties of power inductors , 2021, Journal of Non-Crystalline Solids.

[8]  Lingbin Meng,et al.  The phosphating effect on the properties of FeSiCr alloy powder , 2021, Journal of Magnetism and Magnetic Materials.

[9]  Jae Kyeong Jeong,et al.  Enhanced Permeability of Fe-Based Amorphous Powder Cores Realized through Selective Incorporation of Carbonyl Iron Powders at Inter-Particle Voids , 2021, Metals.

[10]  C. Xia,et al.  Improved magnetic properties of FeSiCr amorphous soft magnetic composites by adding carbonyl iron powder , 2021 .

[11]  Dongchu Chen,et al.  Insulation layer design for soft magnetic composites by synthetically comparing their magnetic properties and coating process parameters , 2021 .

[12]  Guodong Zhang,et al.  Magnetic properties of iron-based soft magnetic composites prepared via phytic acid surface treatment , 2020 .

[13]  A. Volinsky,et al.  FeSiBCrC amorphous magnetic powder fabricated by gas-water combined atomization , 2020, Journal of Alloys and Compounds.

[14]  Yongnan Chen,et al.  Corrosion resistance of plasma-sprayed Fe-based coatings by using core-shell structure powders , 2020 .

[15]  Dongchu Chen,et al.  Magnetic properties regulation and loss contribution analysis for Fe-based amorphous powder cores doped with micron-sized FeSi powders , 2020 .

[16]  Dongchu Chen,et al.  Crystal-like microstructural Finemet/FeSi compound powder core with excellent soft magnetic properties and its loss separation analysis , 2020 .

[17]  Xiansong Liu,et al.  Low melting glass as adhesive and insulating agent for soft magnetic composites: Case in FeSi powder core , 2020 .

[18]  P. Švec,et al.  Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons , 2020 .

[19]  Qiang Chi,et al.  High filling alumina/epoxy nanocomposite as coating layer for Fe-based amorphous powder cores with enhanced magnetic performance , 2019, Journal of Materials Science: Materials in Electronics.

[20]  Yaqiang Dong,et al.  Enhanced magnetic properties of Fe-based nanocrystalline composites by addition of carbonyl iron powders , 2019, SN Applied Sciences.

[21]  Min Liu,et al.  Improvement of soft magnetic properties of FeSiBPNb amorphous powder cores by addition of FeSi powder , 2019, Journal of Alloys and Compounds.

[22]  Haibo Sun,et al.  Strategy to Enhance Magnetic Properties of Fe78Si9B13 Amorphous Powder Cores in the Industrial Condition , 2019, Metals.

[23]  Yuandong Peng,et al.  The magnetic properties and microstructure of phosphated amorphous FeSiCr/silane soft magnetic composite , 2019, Journal of Magnetism and Magnetic Materials.

[24]  M. Tsai,et al.  Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting , 2019, AIP Advances.

[25]  Min Liu,et al.  Novel Fe-based nanocrystalline powder cores with high performance prepared by using industrial materials , 2018, Intermetallics.

[26]  T. Monson,et al.  Soft magnetic materials for a sustainable and electrified world , 2018, Science.

[27]  A. Makino,et al.  Fabrication and Properties of Under 10 $\mu$ m Sized Amorphous Powders of High $B_{s}$ Soft Magnetic Alloy for High-Frequency Applications , 2018, IEEE Transactions on Magnetics.

[28]  H. Hsiang,et al.  Phosphoric acid addition effect on the microstructure and magnetic properties of iron-based soft magnetic composites , 2018 .

[29]  Min Liu,et al.  Fabrication and magnetic properties of novel Fe-based amorphous powder and corresponding powder cores , 2018, Journal of Materials Science: Materials in Electronics.

[30]  D. Zeng,et al.  Improved permeability of Fe based amorphous magnetic powder cores by adding Permalloy , 2017 .

[31]  Ruru Bai,et al.  The percolation effect and optimization of soft magnetic properties of FeSiAl magnetic powder cores , 2017 .

[32]  R. Yu,et al.  Oxidation fabrication and enhanced soft magnetic properties for core-shell FeCo/CoFe2O4 micron-nano composites , 2017 .

[33]  Run‐Wei Li,et al.  Fabrication of FeSiBPNb amorphous powder cores with high DC-bias and excellent soft magnetic properties , 2016 .

[34]  Shih-Fan Chen,et al.  Passivation layer for the magnetic property enhancement of Fe72.8Si11.2B10.8Cr2.3C2.9 amorphous powder , 2015 .

[35]  Yan Zhang,et al.  Production and Properties of Soft Magnetic Cores Made From Fe-Rich FeSiBPCu Powders , 2015, IEEE Transactions on Magnetics.

[36]  A. Makino,et al.  Fe-Rich Fe–Si–B–P–Cu Powder Cores for High-Frequency Power Electronic Applications , 2014, IEEE Transactions on Magnetics.

[37]  W. Xu,et al.  Effect of processing parameters on the magnetic properties and microstructures of molybdenum permalloy compacts made by powder metallurgy , 2014 .

[38]  Z. Xiao,et al.  Effects of sintering temperature on microstructure and property evolution of Fe81Cu2Nb3Si14 soft magnetic materials fabricated from amorphous melt-spun ribbons by spark plasma sintering technique , 2012 .

[39]  M. Yamaguchi,et al.  Amorphous Submicron Particle Chains With High Permeability , 2011, IEEE Transactions on Magnetics.

[40]  A. Makino,et al.  Characteristics of Fe-Si-B-P-Cu Nanocrystalline Soft Magnetic Alloy Powders With High Bs , 2011, IEEE Transactions on Magnetics.

[41]  K. Ishiyama,et al.  Magnetic Properties of Fe-Based Amorphous Powder Cores With High Magnetic Flux Density , 2009, IEEE Transactions on Magnetics.

[42]  G. Herzer.  Invited paperNanocrystalline soft magnetic materials , 1992 .