Multibody Approach for Model-Based Fault Detection of a Reel

In order to improve the recognition of faulty situations, model-based fault detection can be used together with signal processing methods. In this study, faults and abnormalities of a reel are studied by employing the multibody simulation approach. The reel under consideration consists of a number of subsystems, including hydraulics, electrical drives, and mechanical parts. These subsystems are coupled by joints, friction forces, and contact forces. Using the multibody simulation approach, the complete model of the reel can be obtained by coupling different subsystems together. Three well-known multibody formulations, a method of Lagrange multipliers, an Augmented Lagrangian method, and a method based on projection matrix R, are briefly described and compared in order to find out the most efficient method for simulating the studied reel. Although this study is focused on the simulation of fault scenarios, the introduced multibody simulation approach can be utilized in real-time simulation. This makes it possible to apply the model to an existing reel.

[1]  M. J. Vilenius,et al.  Flexible Semi-Empirical Models for Hydraulic Flow Control Valves , 1991 .

[2]  Jie Chen,et al.  Model-based methods for fault diagnosis: some guide-lines , 1995 .

[3]  E. J. Haug,et al.  Computer aided kinematics and dynamics of mechanical systems. Vol. 1: basic methods , 1989 .

[4]  M. A. Serna,et al.  A modified Lagrangian formulation for the dynamic analysis of constrained mechanical systems , 1988 .

[5]  E. Haug,et al.  Generalized Coordinate Partitioning for Dimension Reduction in Analysis of Constrained Dynamic Systems , 1982 .

[6]  M. Jorkama.  The role of analytical winding dynamics in winder design , 1998 .

[7]  E. Haug,et al.  Kinematic and Kinetic Derivatives in Multibody System Analysis , 1998 .

[8]  Ray P. S. Han,et al.  Predictive Maintenance Using the Rotordynamic Model of a Hydraulic Turbine-Generator Rotor , 1998 .

[9]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[10]  M. A. Serna,et al.  Dynamic analysis of plane mechanisms with lower pairs in basic coordinates , 1982 .

[11]  Javier García de Jalón,et al.  Kinematic and Dynamic Simulation of Multibody Systems: The Real Time Challenge , 1994 .

[12]  E. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—I theory , 1986 .

[13]  Daniel Dopico,et al.  A Combined Penalty and Recursive Real-Time Formulation for Multibody Dynamics , 2004 .

[14]  Rolf Isermann,et al.  Trends in the Application of Model Based Fault Detection and Diagnosis of Technical Processes , 1996 .

[15]  Ahmed A. Shabana,et al.  Dynamics of Multibody Systems , 2020 .