1997 Best Paper Award—Turbomachinery Committee: A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor

This paper presents a study of stall inception mechanisms in a low-speed axial compressor. Previous work has identified two common flow breakdown sequences, the first associated with a short length-scale disturbance known as a “spike,” and the second with a longer length-scale disturbance known as a “modal oscillation.” In this paper the physical differences between these two mechanisms are illustrated with detailed measurements. Experimental results are also presented that relate the occurrence of the two stalling mechanisms to the operating conditions of the compressor. It is shown that the stability criteria for the two disturbances are different: Long length-scale disturbances are related to a two-dimensional instability of the whole compression system, while short length-scale disturbances indicate a three-dimensional breakdown of the flow-field associated with high rotor incidence angles. Based on the experimental measurements, a simple model is proposed that explains the type of stall inception pattern observed in a particular compressor. Measurements from a single-stage low-speed compressor and from a multistage high-speed compressor are presented in support of the model.

[1]  Tom Hynes,et al.  Stall Inception in Axial Compressors , 1990 .

[2]  Alan H. Epstein,et al.  Rotating Waves as a Stall inception Indication in Axial Compressors , 1991 .

[3]  Ivor Day.  Stall inception in axial flow compressors , 1993 .

[4]  Alan H. Epstein,et al.  Pre-Stall Behavior of Several High-Speed Compressors , 1994 .

[5]  F. Moore,et al.  A Theory of Post-Stall Transients in Axial Compression Systems: Part I—Development of Equations , 1986 .

[6]  Edward M. Greitzer,et al.  Active suppression of aerodynamic instabilities in turbomachines , 1989 .

[7]  Alan H. Epstein,et al.  Active Stabilization of Rotating Stall in a Three-Stage Axial Compressor , 1994 .

[8]  James D. Paduano,et al.  Modeling for Control of Rotating Stall in High Speed Multi-Stage Axial Compressors , 1994 .

[9]  Alan H. Epstein,et al.  Evaluation of approaches to active compressor surge stabilization , 1993 .

[10]  J. P. Longley,et al.  ANALYSIS OF ROTATING STALL ONSET IN HIGH SPEED AXIAL FLOW COMPRESSORS , 1993 .

[11]  James D. Paduano,et al.  Controls and Diagnostics Committee Best 1994 Paper Award: Modeling for Control of Rotating Stall in High-Speed Multistage Axial Compressors , 1996 .

[12]  Ivor Day.  Active suppression of rotating stall and surge in axial compressors , 1993 .

[13]  Ivor Day,et al.  Stall Inception and the Prospects for Active Control in Four High Speed Compressors , 1997 .

[14]  Alan H. Epstein,et al.  Prestall Behavior of Several High-Speed Compressors , 1995 .

[15]  Donald Andrew Hoying.  Blade passage flow structure effects on axial compressor rotating stall inception , 1996 .

[16]  L. Valavani,et al.  Active control of rotating stall in a low-speed axial compressor , 1993 .