Experimental investigation on tool wear in ultrasonic vibration-assisted turning of SiCf/SiC ceramic matrix composite

[1]  Wenhu Wang,et al.  Feasibility and tool performance of ultrasonic vibration-assisted milling-grinding SiCf/SiC ceramic matrix composite , 2022, Journal of Materials Research and Technology.

[2]  Rodrigo Henriques Lopes da Silva,et al.  Green ceramic machining benefits through ultrasonic-assisted turning: an experimental investigation , 2021, The International Journal of Advanced Manufacturing Technology.

[3]  C. K. Nirala,et al.  Tool Wear Analysis during Ultrasonic Assisted Turning of Nimonic-90 under Dry and Wet Conditions , 2021, Metals.

[4]  Liang Li,et al.  Experimental Study on High-Speed Milling of SiCf/SiC Composites with PCD and CVD Diamond Tools , 2021, Materials.

[5]  J. Jain,et al.  Influence of ultrasonic vibration assistance in manufacturing processes: A Review , 2021 .

[6]  Zhen Yin,et al.  Analysis on ground surface in ultrasonic face grinding of silicon carbide (SiC) ceramic with minor vibration amplitude , 2021 .

[7]  Deyuan Zhang,et al.  Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel. , 2020, Ultrasonics.

[8]  Ming Chen,et al.  Machining of SiC ceramic matrix composites: A review , 2020 .

[9]  R. Bhushan.  Impact of nose radius and machining parameters on surface roughness, tool wear and tool life during turning of AA7075/SiC composites for green manufacturing , 2020 .

[10]  Yixuan Feng,et al.  Tool wear rate prediction in ultrasonic vibration-assisted milling , 2020 .

[11]  Xibin Wang,et al.  Experimental study on tool wear in ultrasonic vibration–assisted milling of C/SiC composites , 2020 .

[12]  W. Cong,et al.  Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives , 2020 .

[13]  Xibin Wang,et al.  Experimental study on tool wear in ultrasonic vibration–assisted milling of C/SiC composites , 2020, The International Journal of Advanced Manufacturing Technology.

[14]  Lianjie Ma,et al.  Study on mechanism and theoretical model of tool wear in fluorophlogopite glass-ceramics turning , 2020 .

[15]  Fengqi Liu,et al.  A review of third generation SiC fibers and SiCf/SiC composites , 2019 .

[16]  A. Jain,et al.  Rotary ultrasonic milling of C/SiC composites fabricated using chemical vapor infiltration and needling technique , 2019, Materials Research Express.

[17]  Hui Wang,et al.  A mechanistic model on feeding-directional cutting force in surface grinding of CFRP composites using rotary ultrasonic machining with horizontal ultrasonic vibration , 2019, International Journal of Mechanical Sciences.

[18]  D. Axinte,et al.  The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity , 2019, International Journal of Machine Tools and Manufacture.

[19]  Liang Li,et al.  Study on the tool wear and its effect of PCD tool in micro milling of tungsten carbide , 2018, International Journal of Refractory Metals and Hard Materials.

[20]  W. J. Zong,et al.  Prediction model of tool wear volume in precision turning of ceramic particle reinforced aluminum matrix composites , 2018, The International Journal of Advanced Manufacturing Technology.

[21]  Ping Guo,et al.  Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration , 2018, Manufacturing Letters.

[22]  Ping Guo,et al.  Feasibility Study of Longitudinal–Torsional-Coupled Rotary Ultrasonic Machining of Brittle Material , 2018 .

[23]  D. Das,et al.  Dry condition machining performance of T6 treated aluminium matrix composites , 2018 .

[24]  Balla Srinivasa Prasad,et al.  Correlation between vibration amplitude and tool wear in turning: Numerical and experimental analysis , 2017 .

[25]  Xuanxuan Yang,et al.  Prediction of cutting forces in ball-end milling of 2.5D C/C composites , 2016 .

[26]  Yuewu Wang,et al.  Thermo-mechanical properties of C/SiC composite structure under extremely high temperature environment up to 1500 °C , 2016 .

[27]  Xipeng Xu,et al.  Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic , 2015 .

[28]  Yongbo Wu,et al.  Fundamental Machining Characteristics of Ultrasonic Assisted Internal Grinding of SiC Ceramics , 2014 .

[29]  Jatinder Kumar,et al.  ULTRASONIC MACHINING—A COMPREHENSIVE REVIEW , 2013 .

[30]  K. Utpat,et al.  Hot-press sintering temperature response of diamond cutting tools and its correlation with wear mechanism , 2013 .

[31]  K. Palanikumar,et al.  Turning CFRP Composites with Ceramic tool for Surface Roughness Analysis , 2012 .

[32]  Hang Zhao,et al.  An Experimental Study on Diamond Cutting of Optical Glass , 2008 .

[33]  Uday S. Dixit,et al.  A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool , 2007 .

[34]  K. Palanikumar,et al.  Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites , 2007 .

[35]  Zhijian Pei,et al.  Experimental observation of tool wear in rotary ultrasonic machining of advanced ceramics , 2005 .

[36]  M. Aksoy,et al.  Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite , 2005 .

[37]  M. Balat-Pichelin,et al.  Structural modifications of carbon–carbon composites under high temperature and ion irradiation , 2005 .

[38]  Xiaoping Li,et al.  Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites , 2001 .

[39]  Zhou Zehua,et al.  Tool wear and its mechanism for cutting SiC particle-reinforced aluminium matrix composites , 2000 .

[40]  Hisaichi Ohnabe,et al.  Potential application of ceramic matrix composites to aero-engine components , 1999 .