Influence of reactive melt infiltration parameters on microstructure and properties of low temperature derived Cf/ZrC composites

[1]  Song Wang,et al.  Preparation of carbon fiber-reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature , 2012 .

[2]  Lai-fei Cheng,et al.  C/C–SiC–ZrC composites fabricated by reactive melt infiltration with Si0.87Zr0.13 alloy , 2012 .

[3]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[4]  H. Hu,et al.  Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process , 2011 .

[5]  H. Hu,et al.  Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment , 2011 .

[6]  Song Wang,et al.  Fabrication of ZrB2–ZrC-based composites by reactive melt infiltration at relative low temperature , 2011 .

[7]  Guo‐Jun Zhang,et al.  Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives , 2011 .

[8]  Lai-fei Cheng,et al.  Reaction kinetics and ablation properties of C/C–ZrC composites fabricated by reactive melt infiltration , 2011 .

[9]  William E Lee,et al.  Reactive infiltration processing (RIP) of ultra high temperature ceramics (UHTC) into porous C/C composite tubes , 2011 .

[10]  Yu Zhou,et al.  Reactive wetting and infiltration of polycrystalline WC by molten Zr2Cu alloy , 2011 .

[11]  Lai-fei Cheng,et al.  Fracture behavior and mechanism of 2D C/SiC–BCx composite at room temperature , 2011 .

[12]  Kenneth H. Sandhage,et al.  Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity , 2010 .

[13]  Jenn‐Ming Yang,et al.  Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration , 2010 .

[14]  M. X. Zhang,et al.  Growth of TiC octahedron obtained by self-propagating reaction , 2009 .

[15]  Lai-fei Cheng,et al.  Effect of graphitization on microstructure and tribological properties of C/SiC composites prepared by reactive melt infiltration , 2008 .

[16]  Weiming Guo,et al.  Oxidation kinetics and mechanisms of a 2D-C/C composite , 2006 .

[17]  Litong Zhang,et al.  Three‐Dimensional Carbon/Silicon Carbide Composites Prepared by Chemical Vapor Infiltration , 2005 .

[18]  N. Frage,et al.  Wetting of TiC by non-reactive liquid metals , 2002 .

[19]  O. Ilegbusi,et al.  Kinetics of silicon–metal alloy infiltration into porous carbon , 2000 .

[20]  B. Drevet,et al.  Wettability at high temperatures , 1999 .

[21]  W. B. Johnson,et al.  Kinetics of Formation of a Platelet-Reinforced Ceramic Composite Prepared by the Directed Reaction of Zirconium with Boron Carbide , 1991 .

[22]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[23]  H. Hersh.  The Vapor Pressure of Copper , 1953 .