Citizen Science Tools Reveal Changes in Estuarine Water Quality Following Demolition of Buildings

Turbidity and water colour are two easily measurable properties used to monitor pollution. Here, we highlight the utility of a low-cost device—3D printed, hand-held Mini Secchi disk (3DMSD) with Forel-Ule (FU) colour scale sticker on its outer casing—in combination with a mobile phone application (‘TurbAqua’) that was provided to laymen for assessing the water quality of a shallow lake region after demolition of four high-rise buildings on the shores of the lake. The demolition of the buildings in January 2020 on the banks of a tropical estuary—Vembanad Lake (a Ramsar site) in southern India—for violation of Indian Coastal Regulation Zone norms created public uproar, owing to the consequences of subsequent air and water pollution. Measurements of Secchi depth and water colour using the 3DMSD along with measurements of other important water quality variables such as temperature, salinity, pH, and dissolved oxygen (DO) using portable instruments were taken for a duration of five weeks after the demolition to assess the changes in water quality. Paired t-test analyses of variations in water quality variables between the second week of demolition and consecutive weeks up to the fifth week showed that there were significant increases in pH, dissolved oxygen, and Secchi depth over time, i.e., the impact of demolition waste on the Vembanad Lake water quality was found to be relatively short-lived, with water clarity, colour, and DO returning to levels typical of that period of year within 4–5 weeks. With increasing duration after demolition, there was a general decrease in the FU colour index to 17 at most stations, but it did not drop to 15 or below, i.e., towards green or blue colour indicating clearer waters, during the sampling period. There was no significant change in salinity from the second week to the fifth week after demolition, suggesting little influence of other factors (e.g., precipitation or changes in tidal currents) on the inferred impact of demolition waste. Comparison with pre-demolition conditions in the previous year (2019) showed that the relative changes in DO, Secchi depth, and pH were very high in 2020, clearly depicting the impact of demolition waste on the water quality of the lake. Match-ups of the turbidity of the water column immediately before and after the demolition using Sentinel 2 data were in good agreement with the in situ data collected. Our study highlights the power of citizen science tools in monitoring lakes and managing water resources and articulates how these activities provide support to Sustainable Development Goal (SDG) targets on Health (Goal 3), Water quality (Goal 6), and Life under the water (Goal 14).

[1]  Oliver Zielinski,et al.  Optical properties of Forel-Ule water types deduced from 15 years of global satellite ocean color observations , 2019, Remote Sensing of Environment.

[2]  Ivan Rusyn,et al.  Environmental exposures due to natural disasters , 2016, Reviews on environmental health.

[3]  Oliver Zielinski,et al.  Classifying Natural Waters with the Forel-Ule Colour Index System: Results, Applications, Correlations and Crowdsourcing , 2015, International journal of environmental research and public health.

[4]  Manuel J. Rodríguez,et al.  Perception of drinking water in the Quebec City region (Canada): the influence of water quality and consumer location in the distribution system. , 2004, Journal of environmental management.

[5]  Kristi Uudeberg,et al.  Validation and Comparison of Water Quality Products in Baltic Lakes Using Sentinel-2 MSI and Sentinel-3 OLCI Data , 2020, Sensors.

[6]  E. Salameh,et al.  Characteristics of an unusual highly alkaline water from the Maqarin area, northern Jordan , 1985 .

[7]  Maria João Costa,et al.  Temporal and Spatial Variations of Secchi Depth and Diffuse Attenuation Coefficient from Sentinel-2 MSI over a Large Reservoir , 2020, Remote. Sens..

[8]  W. Lin,et al.  Effects of Leaching Behavior of Calcium Ions on Compression and Durability of Cement-Based Materials with Mineral Admixtures , 2013, Materials.

[9]  Rudolph W. Preisendorfer,et al.  Secchi disk science: Visual optics of natural waters1 , 1986 .

[10]  M. Wernand,et al.  On the history of the Secchi disc , 2010 .

[11]  Zoubeir Lafhaj,et al.  Experimental study of accelerated leaching on hollow cylinders of mortar , 2007 .

[12]  M. Kumar,et al.  Status of wetlands in India: A review of extent, ecosystem benefits, threats and management strategies , 2014 .

[13]  Joseph Phillips,et al.  A Printable Device for Measuring Clarity and Colour in Lake and Nearshore Waters , 2019, Sensors.

[14]  E. Amankwah,et al.  Analysis of Chemical Composition of Portland Cement in Ghana: A Key to Understand the Behavior of Cement , 2015 .

[15]  Hendrik G. van Oss,et al.  Cement Manufacture and the Environment: Part I: Chemistry and Technology , 2002 .

[16]  M. Vinson,et al.  Redband trout response to hypoxia in a natural environment , 1994 .

[17]  Mary Anne White,et al.  Cement: Its Chemistry and Properties , 2003 .

[18]  S. Schmidt,et al.  Exploring the Susceptibility of Turbid Estuaries to Hypoxia as a Prerequisite to Designing a Pertinent Monitoring Strategy of Dissolved Oxygen , 2019, Front. Mar. Sci..

[19]  T. Platt,et al.  Citizen Scientists Contribute to Real-Time Monitoring of Lake Water Quality Using 3D Printed Mini Secchi Disks , 2021, Frontiers in Water.