Structural and Interphasial Stabilities of Sulfurized Polyacrylonitrile (SPAN) Cathode

: Sulfurized polyacrylonitrile (SPAN) has attracted a lot of attention because of its low cost, high capacity, and great reversibility. Due to its structural complexity and amorphous nature, reaction mechanism of SPAN is little understood. Here we study the structural and interphasial changes of SPAN using synchrotron-based pair distribution function (PDF) analysis and soft X-ray absorption spectroscopy (sXAS). PDF identifies key structural features, including C − S bond, sulfur dimer, and sulfur chain in SPAN. The sulfur dimer bridging the pyridine network partially converts to sulfur chain during the first charging. In the following cycles, sulfur chain goes through lithiation and delithiation with reversibility dependent on the electrolytes. SXAS reveals surface changes of SPAN. After the first cycle, a negatively charged carbon or fused benzene layer is formed, on top of which is another layer formed by the electrolyte decomposition. The layer formed by localized high concentration electrolyte is stable during cycling.

[1]  Y. Meng,et al.  Structural Transformation in a Sulfurized Polymer Cathode to Enable Long-Life Rechargeable Lithium-Sulfur Batteries. , 2023, Journal of the American Chemical Society.

[2]  T. Weil,et al.  Sulfur‐Composites Derived from Poly(acrylonitrile) and Poly(vinylacetylene) – A Comparative Study on the Role of Pyridinic and Thioamidic Nitrogen , 2023, Batteries & Supercaps.

[3]  C. Grey,et al.  Revealing solid electrolyte interphase formation through interface-sensitive Operando X-ray absorption spectroscopy , 2022, Nature Communications.

[4]  Huolin L. Xin,et al.  Dual Passivation of Cathode and Anode through Electrode–Electrolyte Interface Engineering Enables Long-Lifespan Li Metal–SPAN Batteries , 2022, ACS Energy Letters.

[5]  Dongping Lu,et al.  The Role of Ion Transport in the Failure of High Areal Capacity Li Metal Batteries , 2022, ACS Energy Letters.

[6]  T. Petit,et al.  Soft X-ray spectroscopy of light elements in energy storage materials , 2021 .

[7]  Hun‐Gi Jung,et al.  Multiscale Understanding of Covalently Fixed Sulfur–Polyacrylonitrile Composite as Advanced Cathode for Metal–Sulfur Batteries , 2021, Advanced science.

[8]  Xiao‐Qing Yang,et al.  Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries. , 2021, ACS applied materials & interfaces.

[9]  Xuechun Hu,et al.  Sulfurized Polyacrylonitrile for High-Performance Lithium Sulfur Batteries: Advances and Prospects , 2021, Journal of Materials Chemistry A.

[10]  B. Hwang,et al.  Origin of shuttle-free sulfurized polyacrylonitrile in lithium-sulfur batteries , 2021 .

[11]  Xiao‐Qing Yang,et al.  Review on organosulfur materials for rechargeable lithium batteries. , 2021, Materials horizons.

[12]  Xiulin Fan,et al.  Identification of LiH and nanocrystalline LiF in the solid–electrolyte interphase of lithium metal anodes , 2021, Nature Nanotechnology.

[13]  Ping Liu,et al.  Ultrahigh coulombic efficiency electrolyte enables Li||SPAN batteries with superior cycling performance , 2020 .

[14]  Xiulin Fan,et al.  A chemically stabilized sulfur cathode for lean electrolyte lithium sulfur batteries , 2020, Proceedings of the National Academy of Sciences.

[15]  B. Hwang,et al.  Mechanistic understanding of the Sulfurized-Poly(acrylonitrile) cathode for lithium-sulfur batteries , 2020 .

[16]  M. Buchmeiser,et al.  Cathode materials for lithium–sulfur batteries based on sulfur covalently bound to a polymeric backbone , 2020 .

[17]  D. Ma,et al.  Understanding Photoelectrochemical Water Oxidation with X-ray Absorption Spectroscopy , 2020 .

[18]  Xiangming He,et al.  An Empirical Model for the Design of Batteries with High Energy Density , 2020 .

[19]  Xiao‐Qing Yang,et al.  Pair distribution function analysis: Fundamentals and application to battery materials , 2020 .

[20]  Ping Liu,et al.  Cathode electrolyte interface enabling stable Li–S batteries , 2019, Energy Storage Materials.

[21]  Yu Zhao,et al.  Sulfurized Polyacrylonitrile Cathodes with High Compatibility in Both Ether and Carbonate Electrolytes for Ultrastable Lithium–Sulfur Batteries , 2019, Advanced Functional Materials.

[22]  Kang Xu,et al.  Insight on lithium metal anode interphasial chemistry: Reduction mechanism of cyclic ether solvent and SEI film formation , 2019, Energy Storage Materials.

[23]  L. Cavallo,et al.  Recognizing the Mechanism of Sulfurized Polyacrylonitrile Cathode Materials for Li–S Batteries and beyond in Al–S Batteries , 2018, ACS Energy Letters.

[24]  Shizhao Xiong,et al.  Toward Better Lithium–Sulfur Batteries: Functional Non-aqueous Liquid Electrolytes , 2018, Electrochemical Energy Reviews.

[25]  M. Buchmeiser,et al.  Easily Accessible, Textile Fiber-Based Sulfurized Poly(acrylonitrile) as Li/S Cathode Material: Correlating Electrochemical Performance with Morphology and Structure , 2017 .

[26]  Yuyan Shao,et al.  Restricting the Solubility of Polysulfides in Li‐S Batteries Via Electrolyte Salt Selection , 2016 .

[27]  Jinghua Guo,et al.  Understanding the degradation mechanism of rechargeable lithium/sulfur cells: a comprehensive study of the sulfur-graphene oxide cathode after discharge-charge cycling. , 2014, Physical chemistry chemical physics : PCCP.

[28]  Shengbo Zhang.  Understanding of Sulfurized Polyacrylonitrile for Superior Performance Lithium/Sulfur Battery , 2014 .

[29]  Arumugam Manthiram,et al.  Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.

[30]  Li-Jun Wan,et al.  Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.

[31]  M. Buchmeiser,et al.  Structure-Related Electrochemistry of Sulfur-Poly(acrylonitrile) Composite Cathode Materials for Rechargeable Lithium Batteries , 2011 .

[32]  M Newville,et al.  ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT. , 2005, Journal of synchrotron radiation.

[33]  Naixin Xu,et al.  A novel conductive polymer-sulfur composite cathode material for rechargeable lithium batteries , 2002 .

[34]  A. P. Hammersley,et al.  Two-dimensional detector software: From real detector to idealised image or two-theta scan , 1996 .