Industry 4.0 smart reconfigurable manufacturing machines

Abstract This paper provides a fundamental research review of Reconfigurable Manufacturing Systems (RMS), which uniquely explores the state-of-the-art in distributed and decentralized machine control and machine intelligence. The aim of this review is to draw objective answers to two proposed research questions, relating to: (1) reconfigurable design and industry adoption; and (2) enabling present and future state technology. Key areas reviewed include: (a) RMS – fundamentals, design rational, economic benefits, needs and challenges; (b) Machine Control – modern operational technology, vertical and horizontal system integration, advanced distributed and decentralized control; (c) Machine Intelligence – distributed and decentralized paradigms, technology landscape, smart machine modelling, simulation, and smart reconfigurable synergy. Uniquely, this paper establishes a vision for next-generation Industry 4.0 manufacturing machines, which will exhibit extraordinary Smart and Reconfigurable (SR*) capabilities.

[1]  Alois Zoitl,et al.  Skill-based Engineering Approach using OPC UA Programs , 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN).

[2]  Dawn M. Tilbury,et al.  A software-defined framework for the integrated management of smart manufacturing systems , 2018 .

[3]  P. Fettke,et al.  Industry 4.0 , 2014, Bus. Inf. Syst. Eng..

[4]  Maria-Esther Vidal,et al.  The industry 4.0 standards landscape from a semantic integration perspective , 2017, 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

[5]  Ricardo Augusto Rabelo Oliveira,et al.  Blockchain-Based Process Control and Monitoring Architecture for Vertical Integration of Industry 4.0 , 2020, ArXiv.

[6]  Hamid Reza Arkian,et al.  MIST: Fog-based data analytics scheme with cost-efficient resource provisioning for IoT crowdsensing applications , 2017, J. Netw. Comput. Appl..

[7]  Peter Stone,et al.  Transfer Learning for Reinforcement Learning Domains: A Survey , 2009, J. Mach. Learn. Res..

[8]  Jenq-Shiou Leu,et al.  Improving Heterogeneous SOA-Based IoT Message Stability by Shortest Processing Time Scheduling , 2014, IEEE Transactions on Services Computing.

[9]  Yang Lu,et al.  Industry 4.0: A survey on technologies, applications and open research issues , 2017, J. Ind. Inf. Integr..

[10]  A. Noorul Haq,et al.  Analysis of enablers for the implementation of leagile supply chain management using an integrated fuzzy QFD approach , 2017, J. Intell. Manuf..

[11]  Andrew Y. C. Nee,et al.  Digital twin driven prognostics and health management for complex equipment , 2018 .

[12]  Bo Wang,et al.  Machine Learning based Digital Twin Framework for Production Optimization in Petrochemical Industry , 2019, Int. J. Inf. Manag..

[13]  Silvia Menato,et al.  A Microservice-based Middleware for the Digital Factory , 2017 .

[14]  Xun Xu,et al.  A Cyber-Physical Machine Tools Platform using OPC UA and MTConnect , 2019, Journal of Manufacturing Systems.

[15]  Nicholas R. Jennings,et al.  Intelligent agents: theory and practice , 1995, The Knowledge Engineering Review.

[16]  Yoram Koren,et al.  Reconfigurable manufacturing systems: Principles, design, and future trends , 2017, Frontiers of Mechanical Engineering.

[17]  H. T. Kung,et al.  Distributed Deep Neural Networks Over the Cloud, the Edge and End Devices , 2017, 2017 IEEE 37th International Conference on Distributed Computing Systems (ICDCS).

[18]  Paul Valckenaers,et al.  Holonic Manufacturing Execution Systems , 2005 .

[19]  Lubomír Bakule,et al.  Decentralized control: An overview , 2008, Annu. Rev. Control..

[20]  Damien Trentesaux,et al.  Distributed control of production systems , 2009, Eng. Appl. Artif. Intell..

[21]  Yan Li,et al.  Open CNC Machine Tool's State Data Acquisition and Application Based on OPC Specification , 2016 .

[22]  László Monostori,et al.  ScienceDirect Variety Management in Manufacturing . Proceedings of the 47 th CIRP Conference on Manufacturing Systems Cyber-physical production systems : Roots , expectations and R & D challenges , 2014 .

[23]  Paulo Leitão,et al.  Agent-based distributed manufacturing control: A state-of-the-art survey , 2009, Eng. Appl. Artif. Intell..

[24]  Li Da Xu,et al.  Industry 4.0: state of the art and future trends , 2018, Int. J. Prod. Res..

[25]  Kjeld Nielsen,et al.  Reconfigurable Manufacturing on Multiple Levels: Literature Review and Research Directions , 2015, APMS.

[26]  Eberhard Abele,et al.  Learning factories for future oriented research and education in manufacturing , 2017 .

[27]  Dominic T. J. O'Sullivan,et al.  A comparison of fog and cloud computing cyber-physical interfaces for Industry 4.0 real-time embedded machine learning engineering applications , 2019, Comput. Ind..

[28]  Frantisek Zezulka,et al.  Industry 4.0 – An Introduction in the phenomenon , 2016 .

[29]  Rajkumar Buyya,et al.  Decentralization in Distributed Systems: Challenges, Technologies, and Opportunities , 2012 .

[30]  Jeff Morgan,et al.  The Cyber Physical Implementation of Cloud Manufactuirng Monitoring Systems , 2015 .

[31]  Luca Fumagalli,et al.  Flexible Automation and Intelligent Manufacturing , FAIM 2017 , 27-30 June 2017 , Modena , Italy A review of the roles of Digital Twin in CPS-based production systems , 2017 .

[32]  Edward A. Lee,et al.  Modeling Cyber–Physical Systems , 2012, Proceedings of the IEEE.

[33]  Kleanthis Thramboulidis,et al.  Towards an Object-Oriented extension for IEC 61131 , 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

[34]  Hossam S. Hassanein,et al.  IoT in the Fog: A Roadmap for Data-Centric IoT Development , 2018, IEEE Communications Magazine.

[35]  Sang Do Noh,et al.  Digital twin-based cyber physical production system architectural framework for personalized production , 2019, The International Journal of Advanced Manufacturing Technology.

[36]  Kevin I-Kai Wang,et al.  Digital Twin-driven smart manufacturing: Connotation, reference model, applications and research issues , 2020, Robotics Comput. Integr. Manuf..

[37]  Carin Rösiö,et al.  Towards a generic design method for reconfigurable manufacturing systems: Analysis and synthesis of current design methods and evaluation of supportive tools , 2017 .

[38]  Dirk Schaefer,et al.  Software-defined cloud manufacturing for industry 4.0 , 2016 .

[39]  A. Galip Ulsoy,et al.  Reconfigurable manufacturing systems: Key to future manufacturing , 2000, J. Intell. Manuf..

[40]  Yongkui Liu,et al.  Industry 4.0 and Cloud Manufacturing: A Comparative Analysis , 2017 .

[41]  Lijun Wei,et al.  Digital twin-driven joint optimisation of packing and storage assignment in large-scale automated high-rise warehouse product-service system , 2019, Int. J. Comput. Integr. Manuf..

[42]  Jon Kepa Gerrikagoitia,et al.  Digital Manufacturing Platforms in the Industry 4.0 from Private and Public Perspectives , 2019, Applied Sciences.

[43]  Paulo Leitão,et al.  Industrial automation based on cyber-physical systems technologies: Prototype implementations and challenges , 2016, Comput. Ind..

[44]  Michael A. Saliba,et al.  Towards practical, high-level guidelines to promote company strategy for the use of reconfigurable manufacturing automation , 2017 .

[45]  Vladimír Marík,et al.  Industrial adoption of agent-based technologies , 2005, IEEE Intelligent Systems.

[46]  Deyi Xue,et al.  An approach to identify the optimal configurations and reconfiguration processes for design of reconfigurable machine tools , 2018, Int. J. Prod. Res..

[47]  Remco M. Dijkman,et al.  Service-Oriented Design: A Multi-Viewpoint Approach , 2004, Int. J. Cooperative Inf. Syst..

[48]  Birgit Vogel-Heuser,et al.  Correction to: Cyber-physical production systems architecture based on multi-agent’s design pattern—comparison of selected approaches mapping four agent patterns , 2019, The International Journal of Advanced Manufacturing Technology.

[49]  Yongquan Wang,et al.  A methodology of setting module groups for the design of reconfigurable machine tools , 2019, The International Journal of Advanced Manufacturing Technology.

[50]  Wu He,et al.  Internet of Things in Industries: A Survey , 2014, IEEE Transactions on Industrial Informatics.

[51]  Xun Xu,et al.  Cyber-physical Machine Tool – The Era of Machine Tool 4.0☆ , 2017 .

[52]  Xun Xu,et al.  Machine Tool 4.0 for the new era of manufacturing , 2017 .

[53]  N. Saccani,et al.  Navigating disruptive crises through service-led growth: The impact of COVID-19 on Italian manufacturing firms , 2020, Industrial Marketing Management.

[54]  Rajkumar Roy,et al.  Continuous maintenance and the future – Foundations and technological challenges , 2016 .

[55]  G. B. Benitez,et al.  Industry 4.0 innovation ecosystems: An evolutionary perspective on value cocreation , 2020 .

[56]  László Monostori,et al.  Agent-based systems for manufacturing , 2006 .

[57]  Panos J. Antsaklis,et al.  Control and Communication Challenges in Networked Real-Time Systems , 2007, Proceedings of the IEEE.

[58]  Ángel Iván García Moreno.  Correction to: Automatic quantification of porosity using an intelligent classifier , 2020 .

[59]  Yoram Koren,et al.  Design of reconfigurable manufacturing systems , 2010 .

[60]  Jay Lee,et al.  A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems , 2015 .

[61]  Andrew Kusiak,et al.  Fundamentals of smart manufacturing: A multi-thread perspective , 2019, Annu. Rev. Control..

[62]  Xun Xu,et al.  From cloud computing to cloud manufacturing , 2012 .

[63]  William Derigent,et al.  Industry 4.0: contributions of holonic manufacturing control architectures and future challenges , 2020, Journal of Intelligent Manufacturing.

[64]  S. N. Grigoriev,et al.  Research and Development of a Cross-platform CNC Kernel for Multi-axis Machine Tool☆ , 2014 .

[65]  John A. Mathews.  Organizational foundations of intelligent manufacturing systems — the holonic viewpoint , 1995 .

[66]  Amro M. Farid,et al.  Measures of reconfigurability and its key characteristics in intelligent manufacturing systems , 2014, J. Intell. Manuf..

[67]  Lei Ren,et al.  Cloud manufacturing: from concept to practice , 2015, Enterp. Inf. Syst..

[68]  Robert X. Gao,et al.  Symbiotic human-robot collaborative assembly , 2019, CIRP Annals.

[69]  Enrico Macii,et al.  A Cloud-to-Edge Approach to Support Predictive Analytics in Robotics Industry , 2020, Electronics.

[70]  Stephen Fox,et al.  Moveable factories: How to enable sustainable widespread manufacturing by local people in regions without manufacturing skills and infrastructure , 2015 .

[71]  Marco Bortolini,et al.  Safety, Ergonomics and Human Factors in Reconfigurable Manufacturing Systems , 2019, Springer Series in Advanced Manufacturing.

[72]  Weidong Li,et al.  Cobot programming for collaborative industrial tasks: An overview , 2019, Robotics Auton. Syst..

[73]  E. Hollnagel.  Handbook of Cognitive Task Design , 2009 .

[74]  Joaquim Filipe,et al.  Enterprise Information Systems , 2000, Springer Netherlands.

[75]  Muhammad Intizar Ali,et al.  Industrial IoT and Digital Twins for a Smart Factory : An open source toolkit for application design and benchmarking , 2020, 2020 Global Internet of Things Summit (GIoTS).

[76]  Frank Dürr,et al.  Software-defined environment for reconfigurable manufacturing systems , 2015, 2015 5th International Conference on the Internet of Things (IOT).

[77]  Sabrina Sicari,et al.  5G In the internet of things era: An overview on security and privacy challenges , 2020, Comput. Networks.

[78]  Lyes Benyoucef,et al.  Reconfigurable Manufacturing Systems: From Design to Implementation , 2020 .

[79]  Markus Dickerhof,et al.  A modular flexible scalable and reconfigurable system for manufacturing of Microsystems based on additive manufacturing and e-printing , 2016 .

[80]  A. Subash Babu,et al.  Reconfigurations of manufacturing systems—an empirical study on concepts, research, and applications , 2013 .

[81]  P. Jiang,et al.  Blockchain-empowered sustainable manufacturing and product lifecycle management in industry 4.0: A survey , 2020 .

[82]  Jean-Philippe Diguet,et al.  Towards Dynamically Reconfigurable SoCs (DRSoCs) in industrial automation: State of the art, challenges and opportunities , 2018, Microprocess. Microsystems.

[83]  Andrew Y. C. Nee,et al.  Digital Twins and Cyber–Physical Systems toward Smart Manufacturing and Industry 4.0: Correlation and Comparison , 2019, Engineering.

[84]  Hamid Reza Karimi,et al.  A review of diagnostics and prognostics of low-speed machinery towards wind turbine farm-level health management , 2016 .

[85]  Dimitris Mourtzis,et al.  Cloud-Based Augmented Reality Remote Maintenance Through Shop-Floor Monitoring: A Product-Service System Approach , 2017 .

[86]  Antonio Iera,et al.  The Internet of Things: A survey , 2010, Comput. Networks.

[87]  Andreas Gerstlauer,et al.  DeepThings: Distributed Adaptive Deep Learning Inference on Resource-Constrained IoT Edge Clusters , 2018, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[88]  Jeff Morgan,et al.  Enabling a ubiquitous and cloud manufacturing foundation with field-level service-oriented architecture , 2017, Int. J. Comput. Integr. Manuf..

[89]  Christian Seifarth,et al.  Reconfigurable and transportable container-integrated production system , 2018, Robotics and Computer-Integrated Manufacturing.

[90]  Rex Hartson,et al.  What Are UX and UX Design? , 2019, The UX Book.

[91]  É.,et al.  Managing Byzantine Robots via Blockchain Technology in a Swarm Robotics Collective Decision Making Scenario , 2018, AAMAS.

[92]  Marco Bortolini,et al.  Reconfigurable manufacturing systems: Literature review and research trend , 2018, Journal of Manufacturing Systems.

[93]  Athanasios V. Vasilakos,et al.  Software-Defined Industrial Internet of Things in the Context of Industry 4.0 , 2016, IEEE Sensors Journal.

[94]  Alexandre Dolgui,et al.  Reconfigurable manufacturing systems from an optimisation perspective: a focused review of literature , 2020, Int. J. Prod. Res..

[95]  Andrew Y. C. Nee,et al.  Enabling technologies and tools for digital twin , 2019 .

[96]  Lei Yue,et al.  Automated flexible transfer line design problem: Sequential and reconfigurable stages with parallel machining cells , 2019, Journal of Manufacturing Systems.

[97]  Lyes Benyoucef,et al.  Machine layout design problem under product family evolution in reconfigurable manufacturing environment: a two-phase-based AMOSA approach , 2019, The International Journal of Advanced Manufacturing Technology.

[98]  R. Landers,et al.  Reconfigurable machine tools , 2001 .

[99]  Ercan Öztemel,et al.  Literature review of Industry 4.0 and related technologies , 2018, J. Intell. Manuf..

[100]  Brahim Hnich,et al.  Cyclic scheduling of flexible mixed model assembly lines with parallel stations , 2015 .

[101]  Chaoyang Zhang,et al.  Digital twin-driven rapid reconfiguration of the automated manufacturing system via an open architecture model , 2020, Robotics Comput. Integr. Manuf..

[102]  Ray Y. Zhong,et al.  Intelligent Manufacturing in the Context of Industry 4.0: A Review , 2017 .

[103]  Klaus-Dieter Thoben,et al.  Machine learning in manufacturing: advantages, challenges, and applications , 2016 .

[104]  Song Han,et al.  Industrial Internet of Things: Challenges, Opportunities, and Directions , 2018, IEEE Transactions on Industrial Informatics.

[105]  Bianca Scholten.  Integrating ISA-88 and ISA-95 , 2007 .

[106]  Brian Logan,et al.  Evolvable Assembly Systems: A Distributed Architecture for Intelligent Manufacturing , 2015 .

[107]  Qiang Wang,et al.  Intelligent assembly system for mechanical products and key technology based on internet of things , 2014, Journal of Intelligent Manufacturing.

[108]  Zhuo Chen,et al.  Edge Analytics in the Internet of Things , 2015, IEEE Pervasive Computing.

[109]  F. Jovane,et al.  Reconfigurable Manufacturing Systems , 1999 .

[110]  J. Javier Gutiérrez,et al.  Modeling the QoS parameters of DDS for event-driven real-time applications , 2015, J. Syst. Softw..

[111]  Mohammad Omar Abdullah,et al.  A review on the applications of programmable logic controllers (PLCs) , 2016 .

[112]  Tarik Taleb,et al.  Survey on Multi-Access Edge Computing for Internet of Things Realization , 2018, IEEE Communications Surveys & Tutorials.

[113]  Jindong Tan,et al.  RT-ROS: A real-time ROS architecture on multi-core processors , 2016, Future Gener. Comput. Syst..

[114]  K.L.S. Sharma.  Overview of Industrial Process Automation , 2011 .

[115]  Mr Shashank Kumar,et al.  Applications of industry 4.0 to overcome the COVID-19 operational challenges , 2020, Diabetes & Metabolic Syndrome: Clinical Research & Reviews.

[116]  Lihui Wang,et al.  Reconfigurable manufacturing systems: the state of the art , 2008 .

[117]  Nick McKeown,et al.  OpenFlow: enabling innovation in campus networks , 2008, CCRV.

[118]  Erik Hofmann,et al.  Industry 4.0 and the current status as well as future prospects on logistics , 2017, Comput. Ind..

[119]  Juergen Jasperneite,et al.  The Future of Industrial Communication: Automation Networks in the Era of the Internet of Things and Industry 4.0 , 2017, IEEE Industrial Electronics Magazine.

[120]  Stefan Bussmann Daimler-Benz.  An Agent-Oriented Architecture for Holonic Manufacturing Control , 2007 .

[121]  Bogdan-Constantin Pirvu,et al.  Engineering insights from an anthropocentric cyber-physical system: A case study for an assembly station , 2016 .

[122]  T. Bauernhansl.  Die Vierte Industrielle Revolution – Der Weg in ein wertschaffendes Produktionsparadigma , 2014 .

[123]  Vicent J. Botti,et al.  Holons and agents , 2004, J. Intell. Manuf..

[124]  Jay Lee,et al.  Self-maintenance and engineering immune systems: Towards smarter machines and manufacturing systems , 2011, Annu. Rev. Control..

[125]  Chin-Teng Lin,et al.  Edge of Things: The Big Picture on the Integration of Edge, IoT and the Cloud in a Distributed Computing Environment , 2018, IEEE Access.

[126]  Thomas H.J. Vaneker,et al.  Design of a decentralized modular architecture for flexible and extensible production systems , 2016 .

[127]  Yoram Koren,et al.  General RMS Characteristics. Comparison with Dedicated and Flexible Systems , 2006 .

[128]  Seung Ho Hong,et al.  An AutomationML/OPC UA-based Industry 4.0 Solution for a Manufacturing System , 2018, 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).

[129]  H.-R. Kim,et al.  A modular factory testbed for the rapid reconfiguration of manufacturing systems , 2019, J. Intell. Manuf..

[130]  Jörg H. Siekmann,et al.  Holonic Multiagent Systems: A Foundation for the Organisation of Multiagent Systems , 2003, HoloMAS.

[131]  Valeriy Vyatkin.  IEC 61499 as Enabler of Distributed and Intelligent Automation: State-of-the-Art Review , 2011, IEEE Transactions on Industrial Informatics.

[132]  Birgit Vogel-Heuser,et al.  Industrie 4.0 in Produktion, Automatisierung und Logistik. Anwendung · Technologien · Migration , 2014 .

[133]  Qiang Liu,et al.  Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop , 2018, Journal of Ambient Intelligence and Humanized Computing.

[134]  Zhao Rongli,et al.  Digital twin-based designing of the configuration, motion, control, and optimization model of a flow-type smart manufacturing system , 2020 .

[135]  François Jammes,et al.  Service-oriented paradigms in industrial automation , 2005, IEEE Transactions on Industrial Informatics.

[136]  Edward A. Lee.  Cyber Physical Systems: Design Challenges , 2008, 2008 11th IEEE International Symposium on Object and Component-Oriented Real-Time Distributed Computing (ISORC).

[137]  Mariagrazia Dotoli,et al.  An overview of current technologies and emerging trends in factory automation , 2018, Int. J. Prod. Res..

[138]  Tobias Meisen,et al.  OPC UA Based ERP Agents: Enabling Scalable Communication Solutions in Heterogeneous Automation Environments , 2017, PAAMS.

[139]  Peter Norvig,et al.  Artificial Intelligence: A Modern Approach , 1995 .

[140]  Paul Baran,et al.  On Distributed Communications: I. Introduction to Distributed Communications Networks , 1964 .

[141]  Stefan Hauck-Stattelmann,et al.  Container-based architecture for flexible industrial control applications , 2018, J. Syst. Archit..

[142]  Boris V. Sokolov,et al.  Applicability of optimal control theory to adaptive supply chain planning and scheduling , 2012, Annu. Rev. Control..

[143]  Anatoli I. Dashchenko,et al.  Reconfigurable manufacturing systems and transformable factories , 2006 .

[144]  Radu F. Babiceanu,et al.  Development and Applications of Holonic Manufacturing Systems: A Survey , 2006, J. Intell. Manuf..

[145]  José Barata,et al.  SOA in reconfigurable supply chains: A research roadmap , 2009, Eng. Appl. Artif. Intell..

[146]  Krzysztof Jemielniak,et al.  Advanced monitoring of machining operations , 2010 .

[147]  Chenyang Lu,et al.  Introduction to Control Theory And Its Application to Computing Systems , 2008 .

[148]  Petri Helo,et al.  The role of wearable devices in meeting the needs of cloud manufacturing , 2017 .

[149]  Yoram Koren,et al.  The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems , 2010 .

[150]  Yoram Koren,et al.  Value creation through design for scalability of reconfigurable manufacturing systems , 2017, Int. J. Prod. Res..

[151]  Qiang Liu,et al.  ManuChain: Combining Permissioned Blockchain With a Holistic Optimization Model as Bi-Level Intelligence for Smart Manufacturing , 2020, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[152]  Qiang Liu,et al.  Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system , 2019, Int. J. Prod. Res..

[153]  Fernando M. V. Ramos,et al.  Software-Defined Networking: A Comprehensive Survey , 2014, Proceedings of the IEEE.

[154]  Peter Nyhuis,et al.  Changeable Manufacturing - Classification, Design and Operation , 2007 .

[155]  Lihui Wang,et al.  Cloud Manufacturing: Current Trends and Future Implementations , 2015 .

[156]  Christian Brecher,et al.  Virtual machine tool , 2005 .

[157]  Fei Tao,et al.  Digital twin-driven product design, manufacturing and service with big data , 2017, The International Journal of Advanced Manufacturing Technology.

[158]  Pai Zheng,et al.  A state-of-the-art survey of Digital Twin: techniques, engineering product lifecycle management and business innovation perspectives , 2019, Journal of Intelligent Manufacturing.

[159]  Dick Caro.  Automation Network Selection: A Reference Manual, 2nd Edition , 2009 .

[160]  Pingyu Jiang,et al.  Makerchain: A blockchain with chemical signature for self-organizing process in social manufacturing , 2019, Journal of Cleaner Production.

[161]  Antonio Padovano,et al.  Smart operators in industry 4.0: A human-centered approach to enhance operators' capabilities and competencies within the new smart factory context , 2017, Comput. Ind. Eng..

[162]  Benoît Eynard,et al.  SME-oriented flexible design approach for robotic manufacturing systems , 2019, Journal of Manufacturing Systems.

[163]  Sebastian Büttner,et al.  smARt.Assembly - Projection-Based Augmented Reality for Supporting Assembly Workers , 2016, HCI.

[164]  Najib M. Najid,et al.  System Engineering-Based Methodology to Design Reconfigurable Manufacturing Systems , 2020, Springer Series in Advanced Manufacturing.

[165]  Michael A. Saliba,et al.  A heuristic approach to module synthesis in the design of reconfigurable manufacturing systems , 2019, The International Journal of Advanced Manufacturing Technology.

[166]  Lihui Wang,et al.  Ubiquitous manufacturing system based on Cloud , 2017 .

[167]  Sergey Levine,et al.  Learning modular neural network policies for multi-task and multi-robot transfer , 2016, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[168]  Friedhelm Nachreiner,et al.  Human factors in process control systems: The design of human–machine interfaces ☆ , 2006 .

[169]  Dazhong Wu,et al.  Deep learning for smart manufacturing: Methods and applications , 2018, Journal of Manufacturing Systems.

[170]  Xun Xu,et al.  Striving for a total integration of CAD, CAPP, CAM and CNC , 2004 .

[171]  Raja Lavanya,et al.  Fog Computing and Its Role in the Internet of Things , 2019, Advances in Computer and Electrical Engineering.

[172]  Piyush Maheshwari,et al.  The Convergence of Digital Twin, IoT, and Machine Learning: Transforming Data into Action , 2019, Internet of Things.

[173]  Partha Pratim Ray,et al.  A survey of IoT cloud platforms , 2016 .

[174]  Wei Xiao,et al.  Scheduling uniform manufacturing resources via the Internet: A review , 2019 .

[175]  Marco Bortolini,et al.  Reconfigurability in cellular manufacturing systems: a design model and multi-scenario analysis , 2019, The International Journal of Advanced Manufacturing Technology.

[176]  George Chryssolouris,et al.  Digital twin-driven supervised machine learning for the development of artificial intelligence applications in manufacturing , 2020, Int. J. Comput. Integr. Manuf..

[177]  George Q. Huang,et al.  Toward open manufacturing: A cross-enterprises knowledge and services exchange framework based on blockchain and edge computing , 2017, Ind. Manag. Data Syst..

[178]  Paulo E. Miyagi,et al.  An architecture based on RAMI 4.0 to discover equipment to process operations required by products , 2018, Comput. Ind. Eng..

[179]  Daqiang Zhang,et al.  Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination , 2016, Comput. Networks.

[180]  C. Tisdell.  Economic, social and political issues raised by the COVID-19 pandemic , 2020, Economic Analysis and Policy.

[181]  J.L.M. Lastra,et al.  Service-oriented architectures for collaborative automation , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[182]  Miguel Afonso Sellitto,et al.  Module-based machinery design: a method to support the design of modular machine families for reconfigurable manufacturing systems , 2019, The International Journal of Advanced Manufacturing Technology.

[183]  Lihui Wang,et al.  Combined strength of holons, agents and function blocks in cyber-physical systems , 2016 .

[184]  Xun Xu,et al.  Cloud-based manufacturing equipment and big data analytics to enable on-demand manufacturing services , 2019, Robotics and Computer-Integrated Manufacturing.

[185]  Durga Prasad,et al.  Reconfigurability consideration and scheduling of products in a manufacturing industry , 2018, Int. J. Prod. Res..

[186]  Inmaculada Plaza,et al.  Analysis and implementation of the IEC 61131-3 software model under POSIX Real-Time operating systems , 2006, Microprocess. Microsystems.

[187]  Alessandro De Luca,et al.  Human-robot coexistence and interaction in open industrial cells , 2020, Robotics Comput. Integr. Manuf..

[188]  Anna Syberfeldt,et al.  On a containerized approach for the dynamic planning and control of a cyber - physical production system , 2020, Robotics Comput. Integr. Manuf..

[189]  Sherali Zeadally,et al.  Deploying Fog Computing in Industrial Internet of Things and Industry 4.0 , 2018, IEEE Transactions on Industrial Informatics.

[190]  Soundar R. T. Kumara,et al.  Cyber-physical systems in manufacturing , 2016 .

[191]  Fernando Díaz del Río,et al.  Robotics software frameworks for multi-agent robotic systems development , 2012, Robotics Auton. Syst..

[192]  Jürgen Fleischer,et al.  Modular smart controller for Industry 4.0 functions in machine tools , 2019 .

[193]  Muhammad Shafique,et al.  An overview of next-generation architectures for machine learning: Roadmap, opportunities and challenges in the IoT era , 2018, 2018 Design, Automation & Test in Europe Conference & Exhibition (DATE).

[194]  C. Robert Kenley,et al.  Reference architectures for smart manufacturing: A critical review , 2018, Journal of Manufacturing Systems.

[195]  Alexandre Dolgui,et al.  ON APPLICABILITY OF OPTIMAL CONTROL THEORY TO ADAPTIVE SUPPLY CHAIN PLANNING AND SCHEDULING , 2011 .

[196]  Sunil Chandra,et al.  Decentralized orchestration of composite web services , 2004, WWW Alt. '04.

[197]  Z. M. Bi,et al.  Development of reconfigurable machines , 2008 .

[198]  Yanhong Zhou,et al.  Human–Cyber–Physical Systems (HCPSs) in the Context of New-Generation Intelligent Manufacturing , 2019, Engineering.

[199]  Bedir Tekinerdogan,et al.  Obstacles in Data Distribution Service Middleware: A Systematic Review , 2017, Future Gener. Comput. Syst..

[200]  Kazuhiro Saitou,et al.  Configuration design of scalable reconfigurable manufacturing systems for part family , 2020, Int. J. Prod. Res..

[201]  Regina Frei,et al.  Self-healing and self-repairing technologies , 2013 .

[202]  Jiming Chen,et al.  Distributed Collaborative Control for Industrial Automation With Wireless Sensor and Actuator Networks , 2010, IEEE Transactions on Industrial Electronics.