Existence of Cl in municipal solid waste incineration bottom ash and dechlorination effect of thermal treatment.

Municipal solid waste incineration (MSWI) is widely used in Japan, through which large amount of incineration residues are produced. The recycle/reuse of the incineration residues is troubled by many factors. This paper studied the MSWI bottom ash with the principal focus on Cl. Both bulk analysis and microanalysis methods have been carried out. The bulk analysis disclosed a particle-size dependent pattern of the Cl content in the bottom ash and the insoluble Cl is essentially in the form of Friedel's salt (3CaO·Al(2)O(3)·CaCl(2)·10H(2)O). The microanalysis revealed that Cl preferentially exists in the quench phase of the individual bottom ash particle. Since Friedel's salt and the other quench products are thermally unstable, a series of thermal treatments were carried out to decompose such Cl-bearing phases. The experimental results showed the total Cl content in the MSWI bottom ash was reduced by 55.46% after a 4-h heating process at 1000°C. The removal of the soluble Cl (originally as alkali salts) by the thermal process was found to be more effective. However, the insoluble Cl content in the heated sample was barely lowered owing to the formation of calcium chlorocalumite (11CaO·7Al(2)O(3)·CaCl(2)) in the course of heating.

[1]  N. T. Crosby,et al.  General principles of good sampling practice , 1995 .

[2]  Lorenzo Liberti,et al.  Chloride extraction for quality improvement of municipal solid waste incinerator ash for the concrete industry , 2005, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[3]  G. Mckay,et al.  Use of incineration MSW Ash: A Review , 2010 .

[4]  Fenfen Zhu,et al.  Chloride chemical form in various types of fly ash. , 2008, Environmental science & technology.

[5]  D. Cerqueira,et al.  A New Value for the Heat of Fusion of a Perfect Crystal of Cellulose Acetate , 2006 .

[6]  Takayuki Shimaoka,et al.  Impacts of natural weathering on the transformation/neoformation processes in landfilled MSWI bottom ash: a geoenvironmental perspective. , 2011, Waste management.

[7]  Fenfen Zhu,et al.  The Calcination Process in a System for Washing, Calcinating, and Converting Treated Municipal Solid Waste Incinerator Fly Ash into Raw Material for the Cement Industry , 2011, Journal of the Air & Waste Management Association.

[8]  Stuart Lyon,et al.  Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate , 1996 .

[9]  J. M. Chimenos,et al.  Optimizing the APC residue washing process to minimize the release of chloride and heavy metals. , 2005, Waste management.

[10]  Masaru Tanaka,et al.  Municipal Solid Waste Management in Japan , 2014 .

[11]  Xiujin Li,et al.  Effect of water-extraction on characteristics of melting and solidification of fly ash from municipal solid waste incinerator. , 2009, Journal of hazardous materials.

[12]  Christopher R. Cheeseman,et al.  Properties and microstructure of sintered incinerator bottom ash , 2002 .

[13]  E. De Pauw,et al.  Amines compounds as inhibitors of PCDD/Fs de novo formation on sintering process fly ash. , 2002, Environmental science & technology.

[14]  C. Ko,et al.  Removal of chloride from MSWI fly ash. , 2012, Journal of hazardous materials.

[15]  O. Hjelmar,et al.  Municipal Solid Waste Incinerator Residues , 1997 .

[16]  Song Hu,et al.  Characterization of solid residues from municipal solid waste incinerator , 2004 .

[17]  Robert C. Weast,et al.  Handbook of chemistry and physics : a readyreference book of chemical and physical data , 1972 .

[18]  K. Fukuda,et al.  Crystal structure of Ca12Al14O32Cl2 and luminescence properties of Ca12Al14O32Cl2:Eu2+ , 2008 .

[19]  R. Niessner,et al.  Characterization of municipal solid waste incineration (MSWI) bottom ash by scanning electron microscopy and quantitative energy dispersive X-ray microanalysis (SEM/EDX) , 2001, Fresenius' journal of analytical chemistry.

[20]  J. Kozinski,et al.  Thermal events occurring during the combustion of biomass residue , 2000 .

[21]  David Ward,et al.  A Novel Energy-Efficient Process Utilizing Regenerative Burners for the Detoxification of Fly Ash , 2002 .

[22]  S. Kong,et al.  The adsorption characteristics of heavy metals by various particle sizes of MSWI bottom ash. , 2003, Waste management.

[23]  Anders Lagerkvist,et al.  State-of-the-art treatment processes for municipal solid waste incineration residues in Japan , 2000 .

[24]  F. P. Glasser,et al.  Friedel’s salt, Ca2Al(OH)6(Cl,OH)·2H2O: its solid solutions and their role in chloride binding , 1998 .

[25]  T. Mangialardi,et al.  Characteristics of MSW Incinerator Ash for Use in Concrete , 1998 .

[26]  T. Mangialardi,et al.  Disposal of MSWI fly ash through a combined washing-immobilisation process. , 2003, Journal of hazardous materials.