A low-temperature sealing method for metal-supported oxide fuel cell applications: Ni–Sn transient liquid phase bonding

[1]  S. Jung,et al.  Fast formation of Ni–Sn intermetallic joints using Ni–Sn paste for high-temperature bonding applications , 2020, Journal of Materials Science: Materials in Electronics.

[2]  W. Tillmann,et al.  Microstructure and Mechanical Properties of Reactive-Air-Brazed 3YSZ/Crofer 22 APU Joints at Ambient Temperature , 2020, Metallography Microstructure and Analysis.

[3]  F. Shahriari Nogorani,et al.  The effect of vacuum annealing, cold isostatic pressing, and hydrogen annealing on the microstructure of atmospheric plasma sprayed tungsten coating , 2020 .

[4]  L. X. Zhang,et al.  Reactive air brazing of the YSZ/AISI 310s couples using a novel Ag–Nb2O5 sealant , 2020 .

[5]  N. Saud,et al.  Transient liquid phase bonding for solder-a short review , 2019, IOP Conference Series: Materials Science and Engineering.

[6]  Min Hwan Lee,et al.  Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes , 2019, Journal of Power Sources.

[7]  G. Kaur,et al.  Impact of La2O3/Y2O3 ratio on crystallization kinetics of CaO based alumino-borosilicate glasses and compatibility with Crofer and 8YSZ for SOFCs , 2019, Journal of Non-Crystalline Solids.

[8]  P. He,et al.  Effect of CuZnAl particles addition on microstructure of Cu/Sn58Bi/Cu TLP bonding solder joints , 2019, Vacuum.

[9]  J. Ayawanna,et al.  Effect of bismuth oxide on crystallization and sealing behavior of barium borosilicate glass sealant for SOFCs , 2019, Journal of Non-Crystalline Solids.

[10]  M. Hezam,et al.  Transient Liquid Phase Bonding of Ti-6Al-4V and Mg-AZ31 Alloys Using Zn Coatings , 2019, Materials.

[11]  M. Tucker,et al.  High performance metal-supported solid oxide fuel cells with infiltrated electrodes , 2019, Journal of Power Sources.

[12]  Jie Wang,et al.  The preparation and mechanical properties of carbon/carbon (C/C) composite and carbon fiber reinforced silicon carbide (Cf/SiC) composite joint by partial transient liquid phase (PTLP) diffusion bonding process , 2018, Vacuum.

[13]  Minfang Han,et al.  Oxidation behavior of a Ni-Fe support in SOFC anode atmosphere , 2018, Journal of Alloys and Compounds.

[14]  M. Tucker.  Dynamic-temperature operation of metal-supported solid oxide fuel cells , 2018, Journal of Power Sources.

[15]  T. Bieler,et al.  Transient porous nickel interlayers for improved silver-based Solid Oxide Fuel Cell brazes , 2018 .

[16]  Ji-cai Feng,et al.  Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs , 2018 .

[17]  Yong Du,et al.  Influence of annealing on the microstructure and mechanical properties of MTCVD TiC 0.79 N 0.21 coating , 2018 .

[18]  J. Nielsen,et al.  Towards High Power Density Metal Supported Solid Oxide Fuel Cell for Mobile Applications , 2018 .

[19]  Xiaoguo Song,et al.  Evolution behavior of Al2O3 nanoparticles reinforcements during reactive air brazing and its role in improving the joint strength , 2017 .

[20]  Yong-qing Zhao,et al.  Diffusion behavior and mechanical properties of Cu/Ni coating on TC4 alloy , 2017 .

[21]  Aiping Wu,et al.  Rapid Ag/Sn/Ag transient liquid phase bonding for high-temperature power devices packaging by the assistance of ultrasound. , 2017, Ultrasonics sonochemistry.

[22]  Vinod Kumar,et al.  Influence of CaO/MgO ratio on the crystallization kinetics and interfacial compatibility with crofer 22APU and YSZ of strontium based alumino-borosilicate glasses for SOFC applications , 2017 .

[23]  A. Sanson,et al.  Integration of Ni-GDC layer on a NiCrAl metal foam for SOFC application , 2017 .

[24]  B. Wagner,et al.  High temperature investigation on a nickel–tin transient liquid-phase wafer bonding up to 600 $$^{\circ }$$∘C , 2017 .

[25]  Jihua Huang,et al.  A Transient Liquid Phase Sintering Bonding Process Using Nickel-Tin Mixed Powder for the New Generation of High-Temperature Power Devices , 2017, Journal of Electronic Materials.

[26]  Ji-cai Feng,et al.  Reactive air brazing of YSZ ceramic with novel Al2O3 nanoparticles reinforced Ag-CuO-Al2O3 composite filler: Microstructure and joint properties , 2017 .

[27]  S. Mello-Castanho,et al.  Glass ceramic sealants belonging to BAS (BaO-Al2O3-SiO2) ternary system modified with B2O3 addition: a different approach to access the SOFC seal issue , 2016 .

[28]  Huicong Liu,et al.  Oxidation behavior of nickel coating on ferritic stainless steel interconnect for SOFC application , 2014 .

[29]  T. Khan,et al.  Application of Ni and Cu nanoparticles in transient liquid phase (TLP) bonding of Ti-6Al-4V and Mg-AZ31 alloys , 2014, Journal of Materials Science.

[30]  C. Leinenbach,et al.  Low temperature TLP bonding of Al2O3–ceramics using eutectic Au–(Ge, Si) alloys , 2013, Journal of Materials Science.

[31]  Hiroshi Sato,et al.  Thermally Stable Bonding of SiC Devices with Ceramic Substrates: Transient Liquid Phase Sintering Using Cu/Sn Powders , 2013 .

[32]  M. Mogensen,et al.  Metal-Supported SOFC with Ceramic-Based Anode , 2011 .

[33]  R. Costa,et al.  Nanostructured Composite Cathodes by Suspension Plasma Spraying for SOFC Applications , 2011 .

[34]  Young Min Park,et al.  Fabrication and evaluation of the thin NiFe supported solid oxide fuel cell by co-firing method , 2010 .

[35]  L. Singheiser,et al.  Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature , 2009 .

[36]  Zhenwei Wang,et al.  Dynamic evaluation of low-temperature metal-supported solid oxide fuel cell oriented to auxiliary power units , 2008 .

[37]  J. Fergus.  Effect of cathode and electrolyte transport properties on chromium poisoning in solid oxide fuel cells , 2007 .

[38]  P. Roussel,et al.  A new investigation of the system Ni–Sn , 2007 .

[39]  Zhenwei Wang,et al.  Metal-supported solid oxide fuel cell operated at 400–600 °C , 2007 .

[40]  Steven J. Visco,et al.  A braze system for sealing metal-supported solid oxide fuel cells , 2006 .

[41]  Nigel P. Brandon,et al.  Development of metal supported solid oxide fuel cells for operation at 500–600 °C , 2004 .

[42]  V. Hodoroaba,et al.  Hydrogen embrittlement in coating technology: Measurement & testing , 2002 .