Experimental observations on the in-plane behaviour of masonry wall infilled RC frames; focusing on deformation limits and backbone curve

The ratio of frame strength and stiffness to masonry infill are major parameters that influence the seismic capacity of masonry infill. The influence of such parameters to seismic capacity in terms of strength, stiffness and deformation has significant variations between different design codes and past literature on the topic. This study focused on the in-plane behaviour of unreinforced masonry infill walls installed in reinforced concrete (RC) frames with different strengths. In the first part of this study, two ½ scale specimens with different RC frames and identical masonry infill walls were tested using a static cyclic loading protocol. The main objective was investigating the influence of changing frame strength to seismic capacity in terms of: strength, stiffness and deformation. Results of the presented experiment showed that as the ratio of frame shear strength to masonry shear strength increased, there was great improvement of the masonry infill walls in terms of strength and avoidance of sudden brittle behaviour of the masonry infill. However, varying frame strength did not significantly influence the initial stiffness and story drift at maximum strength. In the second part of this study, an investigation was conducted on the deformation limits of masonry infilled RC frames and the influence of various parameters, based on data collected from many recent experimental tests. Based on these experimental results, the deformation limits of masonry infill were found to be directly proportional to both the compressive prism strength of the masonry infill and the ratio of shear strength of frame to that of the masonry infill. The influence of aspect ratio showed large variation and it is difficult to conclude its level of influence on deformation. A simplified procedure based on experimental data was proposed that can estimate the backbone curve and gave good estimation of the post-peak lateral strength degradation slope based on the ratio of frame strength with simple hand calculation. Such a method is useful in the preliminary design process to help practicing engineers understand the general behaviour expected by infilled RC frames.

[1]  B Hobbs,et al.  Inelastic Design of Infilled Frames , 1995 .

[2]  Hemant B. Kaushik,et al.  Behavior and failure mechanisms of masonry-infilled RC frames (in low-rise buildings) subject to lateral loading , 2016 .

[3]  Anil K. Chopra,et al.  Dynamics of Structures: Theory and Applications to Earthquake Engineering , 1995 .

[4]  Yoshiaki Nakano,et al.  Experimental Study on Lateral Strength Evaluation of Unreinforced Masonry-Infilled RC Frame , 2016 .

[5]  K. Willam,et al.  Experimental Observations of Masonry Infilled Reinforced Concrete Frames with Openings , 2009 .

[6]  P. Benson Shing,et al.  Experimental Evaluation of Masonry-Infilled RC Frames , 1996 .

[7]  Bre,et al.  PLASTICITY, COMPOSITE ACTION AND COLLAPSE DESIGN OF UNREINFORCED SHEAR WALL PANELS IN FRAMES. , 1978 .

[8]  Craig D. Comartin,et al.  Evaluation of Earthquake-Damaged Concrete and Masonry Wall Buildings , 2000 .

[9]  Rj Mainstone,et al.  SUMMARY OF PAPER 7360. ON THE STIFFNESS AND STRENGTHS OF INFILLED FRAMES. , 1971 .

[10]  Iswandi Imran,et al.  Behavior of Reinforced Concrete Frames In-Filled with Lightweight Materials Under Seismic Loads , 2009 .

[11]  Yasushi Sanada,et al.  R/C frame–infill interaction model and its application to Indonesian buildings , 2017 .

[12]  D. J. Kakaletsis,et al.  Experimental Investigation of Infilled Reinforced Concrete Frames with Openings , 2009 .

[13]  Richard M. Bennett,et al.  In-Plane Behavior of Structural Clay Tile Infilled Frames , 1999 .

[14]  Durgesh C. Rai,et al.  Stress-Strain Characteristics of Clay Brick Masonry under Uniaxial Compression , 2007 .

[15]  K. H. Kwan,et al.  Unified Plastic Analysis for Infilled Frames , 1985 .

[16]  T. Paulay,et al.  Seismic Design of Reinforced Concrete and Masonry Buildings , 1992 .

[17]  Baris Binici,et al.  Evaluation of the Predictive Models for Stiffness, Strength, and Deformation Capacity of RC Frames with Masonry Infill Walls , 2014 .

[18]  Durgesh C. Rai,et al.  Lateral Load Behavior of an Open-Ground-Story RC Building with AAC Infills in Upper Stories , 2016 .

[19]  Yoshiaki Nakano,et al.  Experimental evaluation of the in-plane behaviour of masonry wall infilled RC frames , 2017, Bulletin of Earthquake Engineering.

[20]  Hanan Al-Nimry,et al.  Quasi-Static Testing of RC Infilled Frames and Confined Stone-Concrete Bearing Walls , 2014 .