Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure

Abstract Different microstructural features were obtained under various heat treatment conditions, which provided insight into the factors controlling the critical strength in a polycrystalline Ni–Co-based disk superalloy (TMW-4M3 alloy) with a two-phase structure. The contribution of each microstructural feature, namely, the grain size, annealing twin boundary and distribution of γ′ precipitates, to the total strength was analyzed quantitatively by measuring the Vickers hardness over the nanometer to micron size range. Grain boundary strengthening decreased to nearly zero with increasing solution heat treatment temperature, while the secondary and tertiary γ′ precipitation hardening increased. Therefore, there is an optimum combination of microstructural features for achieving the highest tensile strength in such superalloys, the key factors being the temperature and time used for the solution heat treatment and the subsequent aging treatment. A method for determining the optimum factors for TMW-4M3 is proposed.

[1]  H. Harada,et al.  The effect of lattice misfit on the dislocation motion in superalloys during high-temperature low-stress creep , 2005 .

[2]  S. Matsuoka,et al.  Nanoscopic Strength Analysis of Work-Hardened L-Grade Austenitic Stainless Steel, 316(NG) , 2006 .

[3]  R. Reed,et al.  Heat treatment of UDIMET 720Li: the effect of microstructure on properties , 1999 .

[4]  Yuefeng Gu,et al.  Factors contributing to the strength of a polycrystalline nickel–cobalt base superalloy , 2011 .

[5]  H. Harada,et al.  High temperature tensile properties of a series of nickel-base superalloys on a γ/γ′ tie line , 1997 .

[6]  広史 原田,et al.  γ/γ′二相組織を有する Ni-Co 基多結晶超合金の粒成長モデル , 2010 .

[7]  C. Davis,et al.  Modeling solid solution strengthening in nickel alloys , 1997 .

[8]  広史 原田,et al.  新規 Ni-Co 基鍛造超合金における溶体化中の粒成長挙動 , 2010 .

[9]  S. Miura,et al.  Effect of deformation temperature on Hall–Petch relationship registered for polycrystalline magnesium , 2004 .

[10]  Eckhard Nembach,et al.  Particle Strengthening of Metals and Alloys , 1996 .

[11]  Tomoo Suzuki,et al.  Solid Solution Hardening of Ni3Al with Ternary Additions , 1986 .

[12]  Tadaharu Yokokawa,et al.  Deformation mechanisms in a new disc superalloy at low and intermediate temperatures , 2012 .

[13]  R. Reed.  The Superalloys: Fundamentals and Applications , 2006 .

[14]  Yuefeng Gu,et al.  Comparison of Mechanical Properties of TMW Alloys, New Generation of Cast-and-Wrought Superalloys for Disk Applications , 2009 .

[15]  S. Whang,et al.  Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickel , 2001 .

[16]  Z. Zhong,et al.  Mechanical properties and fracture modes of an advanced Ni–Co-base disk superalloy at elevated temperatures , 2012 .

[17]  E. Nembach,et al.  The critical resolved shear stress of γ′-strengthened nickel-based superalloys with γ′-volume fractions between 0.07 and 0.47 , 1992 .

[18]  A. Thompson.  Yielding in nickel as a function of grain or cell size , 1975 .

[19]  Saburo Matsuoka,et al.  Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel , 2001 .

[20]  R. Doherty.  Role of interfaces in kinetics of internal shape changes , 1982 .

[21]  Tadaharu Yokokawa,et al.  A new method to strengthen turbine disc superalloys at service temperatures , 2012 .

[22]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[23]  Z. Zhong,et al.  Influence of Co content on stacking fault energy in Ni–Co base disk superalloys , 2011 .

[24]  Development and application of a combined atomic force microscopy-nanoindentation system with a silicon tip and a diamond indenter , 2002 .

[25]  Tresa M. Pollock,et al.  Strengthening Mechanisms in Polycrystalline Multimodal Nickel-Base Superalloys , 2009 .

[26]  Yuefeng Gu,et al.  A Novel Strategy for the Design of Advanced Engineering Alloys—Strengthening Turbine Disk Superalloys via Twinning Structures , 2011 .

[27]  T. Yokokawa,et al.  Partitioning behavior of platinum group metals on the γ and γ' phases of Ni-base superalloys at high temperatures , 2003 .

[28]  Yuefeng Gu,et al.  Creep behavior of new kinds of Ni–Co-base superalloys , 2009 .

[29]  H. Harada,et al.  Microstructural Evolution and Mechanical Properties of a Ni-Based Superalloy, TMW-4 , 2009 .

[30]  B. Reppich.  Some new aspects concerning particle hardening mechanisms in γ' precipitating Ni-base alloys—I. Theoretical concept , 1982 .