Quantitative assessment by local probe methods of the mechanical and electrical properties of inkjet-printed PEDOT:PSS thin films over Indium Tin Oxide substrates

[1]  S. Fabiano,et al.  Aggregation control in natural brush-printed conjugated polymer films and implications for enhancing charge transport , 2017, Proceedings of the National Academy of Sciences.

[2]  Chelsea S Davis,et al.  Mechanical strength of welding zones produced by material extrusion additive manufacturing. , 2017, Additive manufacturing.

[3]  M. Castillejo,et al.  Laser-Induced Periodic Surface Structures on P3HT and on Its Photovoltaic Blend with PC71BM. , 2016, ACS applied materials & interfaces.

[4]  L. Alcácer,et al.  Inkjet printed organic electrochemical transistors with highly conducting polymer electrolytes , 2016 .

[5]  E. Sardini,et al.  Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing , 2016 .

[6]  A. Nogales,et al.  Laser Fabrication of Polymer Ferroelectric Nanostructures for Nonvolatile Organic Memory Devices. , 2015, ACS applied materials & interfaces.

[7]  Marta Castillejo,et al.  Laser-Induced Periodic Surface Structures on Conjugated Polymers: Poly(3-hexylthiophene) , 2015 .

[8]  A. Hexemer,et al.  The Crystallization of PEDOT:PSS Polymeric Electrodes Probed In Situ during Printing , 2015, Advanced materials.

[9]  Baris Yalcin,et al.  Dynamic assembly of electrically conductive PEDOT:PSS nanofibers in electrospinning process studied by high speed video , 2015 .

[10]  M. Castillejo,et al.  In situ monitoring of laser-induced periodic surface structures formation on polymer films by grazing incidence small-angle X-ray scattering. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[11]  Jun Liu,et al.  Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity , 2015 .

[12]  A. Nogales,et al.  Quantitative mapping of mechanical properties in polylactic acid/natural rubber/organoclay bionanocomposites as revealed by nanoindentation with atomic force microscopy , 2014 .

[13]  Teerakiat Kerdcharoen,et al.  Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection , 2014 .

[14]  M. Calleja,et al.  Fabrication and mechanical characterization of semi-free-standing (conjugated) polymer thin films. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[15]  Jun Hu,et al.  Mechanical mapping of nanobubbles by PeakForce atomic force microscopy , 2013 .

[16]  A. Nogales,et al.  Improving information density in ferroelectric polymer films by using nanoimprinted gratings , 2013 .

[17]  H. Sirringhaus,et al.  Inkjet-printed resistors with a wide resistance range for printed read-only memory applications , 2013 .

[18]  Hermann Seitz,et al.  A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.

[19]  Igor Sokolov,et al.  Quantitative mapping of the elastic modulus of soft materials with HarmoniX and PeakForce QNM AFM modes. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[20]  Y. H. Kahng,et al.  Role of interchain coupling in the metallic state of conducting polymers. , 2012, Physical review letters.

[21]  C. Lekakou,et al.  A comparative assessment of surface microstructure and electrical conductivity dependence on co-solvent addition in spin coated and inkjet printed poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS) , 2012 .

[22]  A. Bonfiglio,et al.  Electrical characteristics of ink-jet printed, all-polymer electrochemical transistors , 2012 .

[23]  W. You,et al.  Rational Design of High Performance Conjugated Polymers for Organic Solar Cells , 2012 .

[24]  Paolo Dario,et al.  Ultra-thin conductive free-standing PEDOT/PSS nanofilms , 2011 .

[25]  C. Riedel,et al.  Broadband nanodielectric spectroscopy by means of amplitude modulation electrostatic force microscopy (AM-EFM). , 2011, Ultramicroscopy.

[26]  Vinod Subramaniam,et al.  Nanomechanical properties of α-synuclein amyloid fibrils: a comparative study by nanoindentation, harmonic force microscopy, and Peakforce QNM , 2011, Nanoscale research letters.

[27]  R. García‐Valverde,et al.  Life cycle analysis of organic photovoltaic technologies , 2010 .

[28]  Sung Cheol Yoon,et al.  High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives , 2010 .

[29]  H. Schönherr,et al.  Scanning Force Microscopy of Polymers , 2010 .

[30]  Dongha Tahk,et al.  Elastic Moduli of Organic Electronic Materials by the Buckling Method , 2009 .

[31]  Xiaodong He,et al.  Grazing incidence X-ray scattering study of sol–gel derived indium tin oxide thin films , 2009 .

[32]  Soo‐Hyoung Lee,et al.  Polymer solar cells based on inkjet-printed PEDOT:PSS layer , 2009 .

[33]  Udo Lang,et al.  Microscopical Investigations of PEDOT:PSS Thin Films , 2009 .

[34]  J. Dual,et al.  Mechanical characterization of PEDOT : PSS thin films , 2009 .

[35]  Robert Forchheimer,et al.  Inkjet printed electrochemical organic electronics , 2008 .

[36]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[37]  J. Dual,et al.  Mechanical Properties of the Intrinsically Conductive Polymer Poly(3,4- Ethylenedioxythiophene) Poly(Styrenesulfonate) (PEDOT/PSS) , 2007 .

[38]  René A. J. Janssen,et al.  Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films , 2007 .

[39]  Lucimara S. Roman,et al.  Modification of the sheet resistance of ink jet printed polymer conducting films by changing the plastic substrate , 2005 .

[40]  Dehua Yang,et al.  Mechanical Characterization of Polyelectrolyte Multilayers Using Quasi-Static Nanoindentation , 2004 .

[41]  R. Jones,et al.  Controlling the Surface Composition of Poly(3,4‐ethylene dioxythiophene)–Poly(styrene sulfonate) Blends by Heat Treatment , 2004 .

[42]  M. Malfois,et al.  Recent experiments on a small-angle/wide-angle X-ray scattering beam line at the ESRF , 2003 .

[43]  H. Okuzaki,et al.  Spinning and Characterization of Conducting Microfibers , 2003 .

[44]  B. V. Derjaguin,et al.  Effect of contact deformations on the adhesion of particles , 1975 .

[45]  A. Carella,et al.  r of acid doped highly conductive polymers † , 2014 .