Nanowire-composite based flexible thermoelectric nanogenerators and self-powered temperature sensors

AbstractWe have developed a flexible thermoelectric nanogenerator (TENG) that is based on a Te-nanowire/poly(3-hexyl thiophene) (P3HT) polymer composite as the thermoelectric material with a positive Seebeck coefficient of 285 μV/K. A linear relationship between the output voltage of TENG and the temperature difference across the device was observed. Under a temperature difference of 55 K, two TENGs can provide an output voltage of 38 mV in serial connection, or a current density exceeding 32 nA/mm2 in parallel connection. We demonstrated that the flexible TENG can be used as a wearable energy harvester by using human body temperature as the energy source. In addition, the TENG can also be used as a self-powered temperature sensor with a response time of 17 s and a reset time of 9 s. The detection sensitivity of the sensor can reach 0.15 K in ambient atmosphere.

[1]  Kevin C. See,et al.  Water-processable polymer-nanocrystal hybrids for thermoelectrics. , 2010, Nano letters.

[2]  Zhong Lin Wang,et al.  Vertically aligned CdSe nanowire arrays for energy harvesting and piezotronic devices. , 2012, ACS nano.

[3]  L. Bell.  Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems , 2008, Science.

[4]  M. Kanatzidis,et al.  Exploring resonance levels and nanostructuring in the PbTe-CdTe system and enhancement of the thermoelectric figure of merit. , 2010, Journal of the American Chemical Society.

[5]  Choongho Yu,et al.  Thermoelectric behavior of segregated-network polymer nanocomposites. , 2008, Nano letters.

[6]  S. Dou,et al.  Al-doped zinc oxide nanocomposites with enhanced thermoelectric properties. , 2011, Nano letters.

[7]  Zhiqun Lin,et al.  Thermopower enhancement in conducting polymer nanocomposites via carrier energy scattering at the organic–inorganic semiconductor interface , 2012 .

[8]  Ali Shakouri,et al.  Improved thermoelectric power factor in metal-based superlattices. , 2004, Physical review letters.

[9]  Long Lin,et al.  Strain-gated piezotronic transistors based on vertical zinc oxide nanowires. , 2012, ACS nano.

[10]  G. J. Snyder,et al.  Complex thermoelectric materials. , 2008, Nature materials.

[11]  Nuanyang Cui,et al.  Magnetic force driven nanogenerators as a noncontact energy harvester and sensor. , 2012, Nano letters.

[12]  Zhong Lin Wang,et al.  Self-powered nanowire devices. , 2010, Nature nanotechnology.

[13]  Dmitri O. Klenov,et al.  Thermal conductivity reduction and thermoelectric figure of merit increase by embedding nanoparticles in crystalline semiconductors. , 2006, Physical review letters.

[14]  Yue Wu,et al.  Flexible nanocrystal-coated glass fibers for high-performance thermoelectric energy harvesting. , 2012, Nano letters.

[15]  Zhong Lin Wang,et al.  Taper PbZr(0.2)Ti(0.8)O3 nanowire arrays: from controlled growth by pulsed laser deposition to piezopotential measurements. , 2012, ACS nano.

[16]  P. Kim,et al.  Thermoelectric power measurements of wide band gap semiconducting nanowires , 2009 .

[17]  Zhong Lin Wang,et al.  Toward self-powered sensor networks , 2010 .

[18]  Zhong Lin Wang,et al.  Lead zirconate titanate nanowire textile nanogenerator for wearable energy-harvesting and self-powered devices. , 2012, ACS nano.

[19]  Terry M. Tritt,et al.  Thermoelectric Materials, Phenomena, and Applications: A Bird’s Eye View , 2006 .

[20]  Minbaek Lee,et al.  Self-powered environmental sensor system driven by nanogenerators , 2011 .