A simple strategy to realize biomimetic surfaces with controlled anisotropic wetting

The study of anisotropic wetting has become one of the most important research areas in biomimicry. However, realization of controlled anisotropic surfaces remains challenging. Here we investigated anisotropic wetting on grooves with different linewidth, period, and height fabricated by laser interference lithography and found that the anisotropy strongly depended on the height. The anisotropy significantly increased from 9° to 48° when the height was changed from 100 nm to 1.3 μm. This was interpreted by a thermodynamic model as a consequence of the increase of free energy barriers versus the height increase. According to the relationship, controlled anisotropic surfaces were rapidly realized by adjusting the grooves’ height that was simply accomplished by changing the resin thickness. Finally, the perpendicular contact angle was further enhanced to 131°±2° by surface modification, which was very close to 135°±3° of a common grass leaf.

[1]  C. Stafford,et al.  Anisotropic wetting on tunable micro-wrinkled surfaces. , 2007, Soft matter.

[2]  Wen Li,et al.  Anisotropic wetting behavior arising from superhydrophobic surfaces: parallel grooved structure. , 2008, Journal of Physical Chemistry B.

[3]  Jin Zhai,et al.  Super-hydrophobic surfaces: From natural to artificial , 2002 .

[4]  S. Brueck,et al.  Strongly anisotropic wetting on one-dimensional nanopatterned surfaces. , 2008, Nano letters.

[5]  Hong Xia,et al.  A facile approach for artificial biomimetic surfaces with both superhydrophobicity and iridescence , 2010 .

[6]  Peng Jiang,et al.  Bioinspired Self‐Cleaning Antireflection Coatings , 2008 .

[7]  Philip Ball,et al.  Engineering Shark skin and other solutions , 1999, Nature.

[8]  Lei Jiang,et al.  Directional adhesion of superhydrophobic butterfly wings. , 2007, Soft matter.

[9]  D. Beebe,et al.  Surface-directed liquid flow inside microchannels. , 2001, Science.

[10]  S. Shoji,et al.  Three‐Dimensional Nanonetwork Assembled in a Photopolymerized Rod Array , 2003 .

[11]  Lars Chittka,et al.  Floral Iridescence, Produced by Diffractive Optics, Acts As a Cue for Animal Pollinators , 2009, Science.

[12]  Anthony M. Jacobi,et al.  Creating micro-scale surface topology to achieve anisotropic wettability on an aluminum surface , 2006 .

[13]  J. Xin,et al.  Hydrophobic duck feathers and their simulation on textile substrates for water repellent treatment , 2008, Bioinspiration & biomimetics.

[14]  Lenz,et al.  Liquid morphologies on structured surfaces: from microchannels to microchips , 1999, Science.

[15]  A. M. Higgins,et al.  Anisotropic spinodal dewetting as a route to self-assembly of patterned surfaces , 2000, Nature.

[16]  Hong Xia,et al.  Self-organization of polymer nanoneedles into large-area ordered flowerlike arrays , 2009 .

[17]  Mei Li,et al.  Anisotropic wetting characteristics on submicrometer-scale periodic grooved surface. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[18]  H. Otsuka,et al.  Macroscopic-wetting anisotropy on the line-patterned surface of fluoroalkylsilane monolayers. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[19]  A Amirfazli,et al.  A thermodynamic approach for determining the contact angle hysteresis for superhydrophobic surfaces. , 2005, Journal of colloid and interface science.

[20]  Satoru Shoji,et al.  Direct laser writing defects in holographic lithography-created photonic lattices. , 2005, Optics letters.