Effect of thermal contact resistances on fast charging of large format lithium ion batteries
暂无分享,去创建一个
Lip Huat Saw | Yixiang Shi | Andrew A. O. Tay | Yonghuang Ye | Yonghuang Ye | Yixiang Shi | L. Saw | A. Tay | Karthik Somasundaram | Karthik Somasundaram
[1] Kamel Hooman,et al. On the electrical and thermal contact resistance of metal foam , 2014 .
[2] Lip Huat Saw,et al. An electro-thermal model and its application on a spiral-wound lithium ion battery with porous current collectors , 2014 .
[3] Seunghun Jung,et al. Multi-dimensional modeling of large-scale lithium-ion batteries , 2014 .
[4] S. Choe,et al. Theoretical and experimental analysis of heat generations of a pouch type LiMn2O4/carbon high power Li-polymer battery , 2013 .
[5] K. Smith,et al. Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries , 2013 .
[6] Liwen Jin,et al. A simulation and experimental study of fluid flow and heat transfer on cylindrical oblique-finned heat sink , 2013 .
[7] Krishnan S. Hariharan. A coupled nonlinear equivalent circuit – Thermal model for lithium ion cells , 2013 .
[8] Song-Yul Choe,et al. Dynamic modeling and analysis of a pouch type LiMn2O4/Carbon high power Li-polymer battery based on electrochemical-thermal principles , 2012 .
[9] Yonghuang Ye,et al. Electro-thermal cycle life model for lithium iron phosphate battery , 2012 .
[10] Qingsong Wang,et al. Thermal runaway caused fire and explosion of lithium ion battery , 2012 .
[11] Arun S. Mujumdar,et al. Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery , 2012 .
[12] T. Wierzbicki,et al. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity , 2012 .
[13] Xiangming He,et al. Electro-thermal modeling and experimental validation for lithium ion battery , 2012 .
[14] Fu-Ming Wang,et al. Differential pulse effects of solid electrolyte interface formation for improving performance on hig , 2011 .
[15] Jeffrey Thomas Remillard,et al. Local State‐of‐Charge Mapping of Lithium‐Ion Battery Electrodes , 2011 .
[16] Shriram Santhanagopalan,et al. Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales , 2011 .
[17] Majid Bahrami,et al. Investigating electrical contact resistance losses in lithium-ion battery assemblies for hybrid and , 2011 .
[18] Mohammadhosein Safari,et al. Modeling of a Commercial Graphite/LiFePO4 Cell , 2011 .
[19] M. Verbrugge,et al. Cycle-life model for graphite-LiFePO 4 cells , 2011 .
[20] Jun Liu,et al. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management , 2010 .
[21] Hidenori Haruna,et al. Large-format lithium-ion batteries for electric power storage , 2010 .
[22] Dinh Vinh Do,et al. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .
[23] Binggang Cao,et al. Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application , 2010 .
[24] U. Kim,et al. Modeling for the scale-up of a lithium-ion polymer battery , 2009 .
[25] U. Kim,et al. Effect of electrode configuration on the thermal behavior of a lithium-polymer battery , 2008 .
[26] Chaoyang Wang,et al. Control oriented 1D electrochemical model of lithium ion battery , 2007 .
[27] Chaoyang Wang,et al. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles , 2006 .
[28] Feng Wu,et al. Thermal analysis of rapid charging nickel/metal hydride batteries , 2006 .
[29] U. Landau,et al. Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents A Theoretical Analysis , 2006 .
[30] Hiroyuki Katsukawa,et al. Degradation Mechanism and Life Prediction of Lithium-Ion Batteries , 2006 .
[31] S. C. Chen,et al. Thermal analysis of lithium-ion batteries , 2005 .
[32] Rengasamy Ponnappan,et al. Contact thermal resistance of Li-ion cell electrode stack , 2004 .
[33] Herbert L Case,et al. Correlation of Arrhenius behaviors in power and capacity fades with cell impedance and heat generation in cylindrical lithium-ion cells , 2003 .
[34] Herbert L Case,et al. Calendar- and cycle-life studies of advanced technology development program generation 1 lithium-ion batteries , 2002 .
[35] Yoshinori Kida,et al. Thermal simulation of large-scale lithium secondary batteries using a graphite-coke hybrid carbon negative electrode and LiNi0.7Co0.3O2 positive electrode , 2002 .
[36] J. Newman,et al. Thermal modeling of the lithium/polymer battery. II: Temperature profiles in a cell stack , 1995 .
[37] P. Monaghan,et al. Effect of contact resistances on the thermal conductivity of an unconsolidated fibre-reinforced thermoplastic prepreg stack , 1994 .
[38] James W. Evans,et al. Thermal analysis of lithium polymer electrolyte batteries by a two dimensional model—thermal behaviour and design optimization , 1994 .
[39] M. Doyle,et al. Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .
[40] L. Fletcher. Review of Thermal Control Materials for Metallic Junctions , 1972 .
[41] Siaw Kiang Chou,et al. Ultra-thin minichannel LCP for EV battery thermal management , 2014 .
[42] Ralph E. White,et al. A Distributed Thermal Model for a Li-Ion Electrode Plate Pair , 2013 .
[43] Chao-Yang Wang,et al. In-Situ Measurement of Current Distribution in a Li-Ion Cell , 2013 .
[44] J. Bernard,et al. Simplified Electrochemical and Thermal Model of LiFePO4-Graphite Li-Ion Batteries for Fast Charge Applications , 2012 .
[45] M. Doyle,et al. Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .