Evaluating cavitation regimes in an internal orifice at different temperatures using frequency analysis and visualization

Abstract Experiments on a water cavitating orifice were conducted to investigate the influence of pressure and temperature on flow regime transition due to cavitation. The thermal effects could be important in cases with cryogenic cavitation or hot fluid injection. The investigations were based on CCD observations and a pressure fluctuations frequency analysis. The high-speed photographic recordings were used to analyze the cavitation evolution and individuate the frequency content of the two-phase flow by processing the pixel-intensity time-series data. The cavitating structures showed different behaviors and characteristics with variations in operating conditions, as the pressure inside the orifice and the flow temperature . The flow regime map for the cavitating flow was obtained using experimental observations to analyze the occurrence of the different two-phase flow regime transitions at various operating conditions. As the pressure at the orifice inlet increased, at the same downstream pressure, cavitation inception occurred. The decrease of the cavitation number brought a significant increase in cavitation zone extension. As the pressure drop inside the orifice increased, the cavitation was characterized by an evident increase in cavitation zone length to the outlet of the orifice. With a further cavitation number decrease, the transition to jet cavitation was evident. The temperature influenced both the cavitation intensity and the cavitation number at which different two-phase flow regime transitions occurred, which tended to increase with temperature. The vapor fraction was estimated using an image processing algorithm. The frequency content given by the pressure fluctuations was analyzed and compared with the frequency spectra obtained from the visual observations. The behavior of the different cavitating flows could be correlated to the frequency spectrum of the pressure fluctuations measured upstream and downstream of the orifice. The cavitation number reduction and consequent increase in cavitating area width were related to a corresponding significant increase in the amplitude of typical frequency components. The transition to jet cavitation was characterized by a significant increase in the first peak in the frequency spectrum; weaker spectral peaks were also present at high cavitation numbers.

[1]  W. H. Nurick,et al.  Orifice Cavitation and Its Effect on Spray Mixing , 1976 .

[2]  A. J. Stepanoff Cavitation Properties of Liquids , 1964 .

[3]  W. Shyy,et al.  Modeling for isothermal and cryogenic cavitation , 2010 .

[4]  Masanori Shimizu,et al.  EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET , 1998 .

[5]  Ali Koşar,et al.  Hydrodynamic Cavitation and Boiling in Refrigerant (R-123) Flow Inside Microchannels , 2007 .

[6]  Yoav Peles,et al.  Cavitation in flow through a micro-orifice inside a silicon microchannel , 2005 .

[7]  Tracie Barber,et al.  Periodic cavitation shedding in a cylindrical orifice , 2011 .

[8]  Yasuhiro Saito,et al.  Unstable Cavitation Behavior in a Circular-Cylindrical Orifice Flow , 2002 .

[9]  Raul Payri,et al.  Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber , 2009 .

[10]  Yoav Peles,et al.  An experimental investigation of hydrodynamic cavitation in micro-Venturis , 2006 .

[11]  J. Paul Tullis,et al.  Cavitation and Size Scale Effects for Orifices , 1973 .

[12]  Cristina Bramanti,et al.  Thermal Cavitation Experiments on a NACA 0015 Hydrofoil , 2006 .

[14]  N. N. Smirnov,et al.  Thermal Growth of a Vapor Bubble Moving in a Superheated Liquid , 2004 .

[15]  F. Aloui,et al.  Synchronized analysis of an unsteady laminar flow downstream of a circular cylinder centred between two parallel walls using PIV and mass transfer probes , 2011 .

[16]  W. Bergwerk,et al.  Flow Pattern in Diesel Nozzle Spray Holes , 1959 .

[17]  Kyubok Ahn,et al.  EFFECTS OF ORIFICE INTERNAL FLOW ON TRANSVERSE INJECTION INTO SUBSONIC CROSSFLOWS: CAVITATION AND HYDRAULIC FLIP , 2006 .

[18]  M. Nedeljkovic,et al.  Frequency in Shedding/Discharging Cavitation Clouds Determined by Visualization of a Submerged Cavitating Jet , 2008 .

[19]  Luca d'Agostino,et al.  Thermal Cavitation Experiments on a NACA 0015 Hydrofoil , 2006 .

[20]  K. Ramamurthi,et al.  Characteristics of flow through small sharp-edged cylindrical orifices , 1999 .

[21]  Ali Koşar,et al.  Cavitation Enhanced Heat Transfer in Microchannels , 2006 .

[22]  Stefan Seelecke,et al.  Thermodynamic modeling and simulation of cavitating nozzle flow , 2003 .

[23]  Yoav Peles,et al.  Flow visualization of cavitating flows through a rectangular slot micro-orifice ingrained in a microchannel , 2005 .

[24]  Rex B. Thorpe,et al.  Flow regime transitions due to cavitation in the flow through an orifice , 1990 .

[25]  Christian Pellone,et al.  Analysis of Thermal Effects in a Cavitating Inducer Using Rayleigh Equation , 2007 .

[26]  M. Abdel-Maksoud,et al.  Modeling and computation of cavitation in vortical flow , 2010 .

[27]  Francisco Ruiz,et al.  EFFECT OF CAVITATION ON FLOW AND TURBULENCE IN PLAIN ORIFICES FOR HIGH-SPEED ATOMIZATION , 1995 .

[28]  Hyun Kyu Suh,et al.  Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics , 2008 .

[29]  Maria Grazia De Giorgi,et al.  Analysis of Thermal Effects in a Cavitating Orifice Using Rayleigh Equation and Experiments , 2010 .

[30]  Y. Peles,et al.  Development of Cavitation in Refrigerant (R-123) Flow Inside Rudimentary Microfluidic Systems , 2006, Journal of Microelectromechanical Systems.

[31]  Masanori Shimizu,et al.  Enhancement of the atomization of a liquid jet by cavitation in a nozzle hole , 2001 .

[32]  Celia Soteriou,et al.  Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization , 1995 .