Comparison of thermally-induced single-mode regime changes in Yb-doped large mode area photonic crystal fibers

Recently, the thermo-optic effect, which causes refractive index change in active optical fibers, emerged as one of the most limiting factor to power scaling of fiber lasers. The thermally-induced refractive index gradient in the fiber cross-section jeopardizes the extreme guiding properties required to obtain single-mode propagation in ultra Large Mode Area (LMA) fibers, eventually causing the rise of mode instabilities. In this paper the resilience to thermal effects of different rod-type Double Cladding Photonic Crystal Fiber designs, namely the 19-cell core, the distributed modal filtering and the large-pitch PCFs, have been compared through numerical simulations. The single-mode properties of each fiber have been obtained for different heating conditions. The causes of the different behavior have been investigated, providing a detailed overview of the influence of thermo-optical effects on the guiding properties of LMA PCFs, as well as some guidelines for the design of LMA PCFs for high-power applications.

[1]  Marko Laurila,et al.  Distributed mode filtering rod fiber amplifier delivering 292W with improved mode stability. , 2012, Optics express.

[2]  J. Limpert,et al.  High-power rod-type photonic crystal fiber laser. , 2005, Optics express.

[3]  Thomas Tanggaard Alkeskjold,et al.  Large-mode-area ytterbium-doped fiber amplifier with distributed narrow spectral filtering and reduced bend sensitivity. , 2009, Optics express.

[4]  Jörg Neumann,et al.  Beam quality degradation of a single-frequency Yb-doped photonic crystal fiber amplifier with low mode instability threshold power. , 2012, Optics letters.

[5]  Cesar Jauregui,et al.  High average power large-pitch fiber amplifier with robust single-mode operation. , 2011, Optics letters.

[6]  Stefano Selleri,et al.  Modal analysis of rib waveguide through finite element and mode matching methods , 2001 .

[7]  S. Selleri,et al.  Thermal Effects on the Single-Mode Regime of Distributed Modal Filtering Rod Fiber , 2012, Journal of Lightwave Technology.

[8]  Liang Dong,et al.  Bend-resistant fundamental mode operation in ytterbium-doped leakage channel fibers with effective areas up to 3160 microm(2). , 2006, Optics express.

[9]  David C. Brown,et al.  Thermal, stress, and thermo-optic effects in high average power double-clad silica fiber lasers , 2001 .

[10]  Marko Laurila,et al.  Single-Mode ytterbium-doped Large-Mode-Area photonic bandgap rod fiber amplifier. , 2011, Optics express.

[11]  Christina B. Olausson,et al.  Airclad fiber laser technology , 2008, SPIE LASE.

[12]  J. Broeng,et al.  Photonic crystal fibers , 2003, Proceedings of the 2003 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference - IMOC 2003. (Cat. No.03TH8678).

[13]  P Loosen,et al.  Heat transport in solid and air-clad fibers for high-power fiber lasers. , 2007, Optics express.

[14]  J. Nilsson,et al.  High power fiber lasers , 2010, CLEO/QELS: 2010 Laser Science to Photonic Applications.

[15]  J Broeng,et al.  Cut-off analysis of 19-cell Yb-doped double-cladding rod-type photonic crystal fibers. , 2011, Optics express.

[16]  Cesar Jauregui,et al.  Thermally induced waveguide changes in active fibers. , 2012, Optics express.

[17]  S. Selleri,et al.  Single-Mode Design Guidelines for 19-Cell Double-Cladding Photonic Crystal Fibers , 2012, Journal of Lightwave Technology.

[18]  Arlee V. Smith,et al.  Mode instability in high power fiber amplifiers. , 2011, Optics express.

[19]  Jens Limpert,et al.  Fiber lasers and amplifiers: an ultrafast performance evolution. , 2010, Applied optics.

[20]  Cesar Jauregui,et al.  Fiber chirped-pulse amplification system emitting 3.8 GW peak power. , 2011, Optics express.

[21]  L. Michaille,et al.  Multicore Photonic Crystal Fiber Lasers for High Power/Energy Applications , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[22]  Mette Marie Jørgensen,et al.  Optimizing single mode robustness of the distributed modal filtering rod fiber amplifier. , 2012, Optics express.

[23]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .