Sustainable advances in SLA/DLP 3D printing materials and processes

The 3D printing market is booming in various sectors coupled with an alarming increase in 3D printed plastic waste. This review summarizes sustainable advances in SLA/DLP plastic 3D printing to date and offers a perspective for further developments.

[1]  Christopher J. Ellison,et al.  Sustainable Polymer Framework , 2020 .

[2]  Yu-Fang Shen,et al.  3D Printing of Amino Resin-based Photosensitive Materials on Multi-parameter Optimization Design for Vascular Engineering Applications , 2019, Polymers.

[3]  A. Gandini,et al.  Rosin: Major Sources, Properties and Applications , 2008 .

[4]  J. Ostrauskaite,et al.  A Bio-Based Resin for a Multi-Scale Optical 3D Printing , 2020, Scientific Reports.

[5]  J. Fyfe,et al.  Isolation of alginate-producing mutants of Pseudomonas fluorescens, Pseudomonas putida and Pseudomonas mendocina. , 1981, Journal of general microbiology.

[6]  A. Shukla,et al.  A review on delignification of lignocellulosic biomass for enhancement of ethanol production potential , 2014 .

[7]  Xiao-Liang Shen,et al.  Optical planar waveguides in photo-thermal-refractive glasses fabricated by single- or double-energy carbon ion implantation , 2018 .

[8]  Amy E. Honnig,et al.  Vanillin-Based Resin for Additive Manufacturing , 2020 .

[9]  P. Gruber,et al.  Polylactic Acid Technology , 2000 .

[10]  D. Grijpma,et al.  Biodegradable nanocomposite hydrogel structures with enhanced mechanical properties prepared by photo-crosslinking solutions of poly(trimethylene carbonate)-poly(ethylene glycol)-poly(trimethylene carbonate) macromonomers and nanoclay particles. , 2012, Acta biomaterialia.

[11]  Martin L. Dunn,et al.  Reprocessable thermosets for sustainable three-dimensional printing , 2018, Nature Communications.

[12]  D. Webster,et al.  Degradable thermosets based on labile bonds or linkages: A review , 2018 .

[13]  Nicholas A. Chartrain,et al.  3D-Printable Biodegradable Polyester Tissue Scaffolds for Cell Adhesion , 2015 .

[14]  F. Safari,et al.  Overview of Albumin and Its Purification Methods. , 2016, Advanced pharmaceutical bulletin.

[15]  A. Gandini,et al.  Monomers, Polymers and Composites from Renewable Resources , 2008 .

[16]  Alan D. Curzons,et al.  So you think your process is green, how do you know?—Using principles of sustainability to determine what is green–a corporate perspective , 2001 .

[17]  Paul Anastas,et al.  Green chemistry: principles and practice. , 2010, Chemical Society reviews.

[18]  D. Dean,et al.  Effect of Chemical and Physical Properties on the In Vitro Degradation of 3D Printed High Resolution Poly(propylene fumarate) Scaffolds. , 2017, Biomacromolecules.

[19]  Mangirdas Malinauskas,et al.  Bioresists from renewable resources as sustainable photoresins for 3D laser microlithography: material synthesis, cross-linking rate and characterization of the structures , 2017, OPTO.

[20]  Bing Wu,et al.  Direct Conversion of McDonald’s Waste Cooking Oil into a Biodegradable High-Resolution 3D-Printing Resin , 2020 .

[21]  Salvador Pané,et al.  3D Printed Enzymatically Biodegradable Soft Helical Microswimmers , 2018, Advanced Functional Materials.

[22]  Lixin Wu,et al.  Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass , 2020, ACS Sustainable Chemistry & Engineering.

[23]  Xueqin Lv,et al.  Combinatorial pathway enzyme engineering and host engineering overcomes pyruvate overflow and enhances overproduction of N-acetylglucosamine in Bacillus subtilis , 2019, Microbial Cell Factories.

[24]  Jan Feijen,et al.  A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomaterials.

[25]  Mangirdas Malinauskas,et al.  Photosensitive naturally derived resins toward optical 3-D printing , 2018 .

[26]  Ye Been Seo,et al.  Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering. , 2019, Biomaterials.

[27]  G. Pinter,et al.  Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials , 2016 .

[28]  Edgar B Cahoon,et al.  Soybean Oil: Genetic Approaches for Modification of Functionality and Total Content1 , 2009, Plant Physiology.

[29]  Hyunsu Cho,et al.  Built‐In Haze Glass‐Fabric Reinforced Siloxane Hybrid Film for Efficient Organic Light‐Emitting Diodes (OLEDs) , 2018, Advanced Functional Materials.

[30]  C. Levene.  Book Review: Treatise on Collagen , 1969 .

[31]  Andrew P. Dove,et al.  Terpene- and terpenoid-based polymeric resins for stereolithography 3D printing , 2019, Polymer Chemistry.

[32]  Jorge F J Coelho,et al.  3D printing of new biobased unsaturated polyesters by microstereo-thermal-lithography , 2014, Biofabrication.

[33]  S. Van Vlierberghe,et al.  (Photo-)crosslinkable Gelatin Derivatives for Biofabrication Applications. , 2019, Acta biomaterialia.

[34]  Wei Zhu,et al.  4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate , 2016, Scientific Reports.

[35]  Chen Wang,et al.  Recyclable and repolymerizable thiol–X photopolymers , 2018 .

[36]  Additive Manufacturing of Bovine Serum Albumin-based Hydrogels and Bioplastics. , 2019, Biomacromolecules.

[37]  Joseph M. DeSimone,et al.  Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production , 2016, PloS one.

[38]  Jan Feijen,et al.  Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D,L-lactide)-based resins. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[39]  Ang Li,et al.  4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer , 2019, Scientific Reports.

[40]  Vincent S. D. Voet,et al.  Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives. , 2020, Macromolecular rapid communications.

[41]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[42]  R. Geyer.  Production, use, and fate of synthetic polymers , 2020 .

[43]  M. Sangermano,et al.  UV-Curable Bio-Based Polymers Derived from Industrial Pulp and Paper Processes , 2021, Polymers.

[44]  David Dean,et al.  Synthesis and Biological Evaluation of Well-Defined Poly(propylene fumarate) Oligomers and Their Use in 3D Printed Scaffolds. , 2016, Biomacromolecules.

[45]  K. Rajan,et al.  Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography. , 2018, ACS applied materials & interfaces.

[46]  Wen-Ching Chang,et al.  3D Printing of Cytocompatible Water-Based Light-Cured Polyurethane with Hyaluronic Acid for Cartilage Tissue Engineering Applications , 2017, Materials.

[47]  M. Dickey,et al.  Rapid Open‐Air Digital Light 3D Printing of Thermoplastic Polymer , 2019, Advanced materials.

[48]  Ji Hoon Park,et al.  3D Printable Non-Isocyanate Polyurethanes with Tunable Material Properties. , 2019, Polymer chemistry.

[49]  W. Guerin,et al.  Macromolecular engineering via ring-opening polymerization (3): trimethylene carbonate block copolymers derived from glycerol , 2014 .

[50]  Po-Yen Chen,et al.  Stereolithographic printing of ionically-crosslinked alginate hydrogels for degradable biomaterials and microfluidics. , 2017, Lab on a chip.

[51]  Manabu Mizutani,et al.  Molecular Design of Photocurable Liquid Biodegradable Copolymers. 1. Synthesis and Photocuring Characteristics , 2000 .

[52]  A. Bagheri,et al.  Photopolymerization in 3D Printing , 2019, ACS Applied Polymer Materials.

[53]  J. Ostrauskaite,et al.  Vanillin Acrylate-Based Resins for Optical 3D Printing , 2020, Polymers.

[54]  Jesse K. Placone,et al.  Development and Characterization of a 3D Printed, Keratin-Based Hydrogel , 2016, Annals of Biomedical Engineering.

[55]  R. Hatti-Kaul,et al.  Chlorine‐Free Synthesis of Organic Alkyl Carbonates and Five‐ and Six‐Membered Cyclic Carbonates , 2016 .

[56]  Peter J. Halley,et al.  Lifetime prediction of biodegradable polymers , 2017 .

[57]  Yunqing Kang,et al.  Biodegradable photocrosslinkable poly(depsipeptide‐co‐ε‐caprolactone) for tissue engineering: Synthesis, characterization, and In vitro evaluation , 2014 .

[58]  Jan Jager,et al.  Photopolymer Resins with Biobased Methacrylates Based on Soybean Oil for Stereolithography , 2020, ACS Applied Polymer Materials.

[59]  Bing-Zhi Li,et al.  Engineering budding yeast for the production of coumarins from lignin , 2020 .

[60]  R. Yu,et al.  Four-dimensional printing of shape memory polyurethanes with high strength and recyclability based on Diels-Alder chemistry , 2020 .

[61]  A. Linker,et al.  A Polysaccharide resembling Alginic Acid from a Pseudomonas Micro-organism , 1964, Nature.

[62]  Chun-peng Wang,et al.  Two-Step 3 D-Printing Approach toward Sustainable, Repairable, Fluorescent Shape-Memory Thermosets Derived from Cellulose and Rosin. , 2020, ChemSusChem.

[63]  C. Ulven,et al.  Exploration of Bio-Based Functionalized Sucrose Ester Resins for Additive Manufacturing via Stereolithography , 2020 .

[64]  L. Francis,et al.  Sustainable near UV-curable acrylates based on natural phenolics for stereolithography 3D printing , 2019, Polymer Chemistry.

[65]  R. Yu,et al.  Self-Healing Polyurethane Elastomers Based on a Disulfide Bond by Digital Light Processing 3D Printing. , 2019, ACS macro letters.

[66]  A. Tullo.  3-D printing firms rise to coronavirus challenge , 2020 .

[67]  C. R. Becer,et al.  Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers , 2015, 1602.01684.

[68]  Johnathan E. Holladay,et al.  Top Value Added Chemicals From Biomass. Volume 1 - Results of Screening for Potential Candidates From Sugars and Synthesis Gas , 2004 .

[69]  J. Ostrauskaite,et al.  Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical µ-3D Printing of Thermosets , 2019, Polymers.

[70]  Shaochen Chen,et al.  Continuous Optical 3D Printing of Green Aliphatic Polyurethanes. , 2017, ACS applied materials & interfaces.

[71]  R. Mülhaupt.  Green Polymer Chemistry and Bio‐based Plastics: Dreams and Reality , 2013 .

[72]  D. Grant,et al.  In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization , 2016, Biomedical materials.

[73]  C. Zhou,et al.  Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels. , 2011, Chemical Society reviews.

[74]  Jane Wang,et al.  Study of Physical and Degradation Properties of 3D-Printed Biodegradable, Photocurable Copolymers, PGSA-co-PEGDA and PGSA-co-PCLDA , 2018, Polymers.

[75]  R. Whistler,et al.  Industrial Gums: Polysaccharides and Their Derivatives , 2012 .

[76]  Fengqin Wang,et al.  Cooperation of hydrolysis modes among xylanases reveals the mechanism of hemicellulose hydrolysis by Penicillium chrysogenum P33 , 2019, Microbial Cell Factories.

[77]  Marvin D. Alim,et al.  A photopolymerizable thermoplastic with tunable mechanical performance , 2020 .

[78]  Harri Korhonen,et al.  Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography. , 2011, Acta biomaterialia.

[79]  J. Brownlie,et al.  Biotechnological production of hyaluronic acid: a mini review , 2016, 3 Biotech.

[80]  A. McNeil,et al.  100th Anniversary of Macromolecular Science Viewpoint: Redefining Sustainable Polymers. , 2020, ACS macro letters.

[81]  Jeffrey M. Skerker,et al.  Monoterpene production by the carotenogenic yeast Rhodosporidium toruloides , 2019, Microbial Cell Factories.

[82]  Jinliang Song,et al.  Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids. , 2017, Chemical reviews.

[83]  W. Holzapfel,et al.  Biogenic amines and their production by microorganisms in food , 1994 .

[84]  Jan Feijen,et al.  Fumaric acid monoethyl ester-functionalized poly(D,L-lactide)/N-vinyl-2-pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomacromolecules.

[85]  A. Weems,et al.  Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Post-Fabrication Surface Modification. , 2020, Biomacromolecules.

[86]  C. V. van Blitterswijk,et al.  Poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resins for digital light processing of bioresorbable tissue engineering implants. , 2019, Biomaterials science.

[87]  M. Kıralan,et al.  Fatty Acid Compositions of Linseed (Linum Usitatissimum L.) Genotypes of Different Origin Cultivated in Turkey , 2010 .

[88]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .