Review of latent heat thermal energy storage for improved material stability and effective load management

[1]  Tapas K. Mallick,et al.  Thermal Performance Analysis of Multi-Phase Change Material Layer-Integrated Building Roofs for Energy Efficiency in Built-Environment , 2017 .

[2]  Michael E. Cholette,et al.  Multi-layer PCM solidification in a finned triplex tube considering natural convection , 2017 .

[3]  S. McCormack,et al.  Investigation of the corrosive properties of phase change materials in contact with metals and plastic , 2017 .

[4]  Rahmatollah Khodabandeh,et al.  Experimental investigation on heat transfer characteristics during melting of a phase change material with dispersed TiO2 nanoparticles in a rectangular enclosure , 2017 .

[5]  Ludovico Danza,et al.  Nano-PCMs for enhanced energy storage and passive cooling applications , 2017 .

[6]  H. Paksoy,et al.  Determining influences of SiO2 encapsulation on thermal energy storage properties of different phase change materials , 2017 .

[7]  Xiaoqin Sun,et al.  Parameter design for a phase change material board installed on the inner surface of building exterior envelopes for cooling in China , 2016 .

[8]  M. Farhadi,et al.  Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus , 2016 .

[9]  A. Sari.  Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials , 2016 .

[10]  K. Reddy,et al.  Performance enhancement of a Building-Integrated Concentrating Photovoltaic system using phase change material , 2016 .

[11]  Leo L Pel,et al.  Experimental studies for the cyclability of salt hydrates for thermochemical heat storage , 2016 .

[12]  Ming Zhao,et al.  Numerical simulation on the thermal performance of hydraulic floor heating system with phase change materials , 2016 .

[13]  Jiawei Lei,et al.  Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore , 2016 .

[14]  L. Kong,et al.  Facile synthesis of Co3P2O8·8H2O for high-performance electrochemical energy storage , 2015 .

[15]  T. Akiyama,et al.  Fabrication of paraffin@SiO2 shape-stabilized composite phase change material via chemical precipitation method for building energy conservation , 2015 .

[16]  Seamus D. Garvey,et al.  Economic analysis of a hybrid energy storage system based on liquid air and compressed air , 2015 .

[17]  Ryan S. Kingsbury,et al.  Energy storage by reversible electrodialysis: The concentration battery , 2015 .

[18]  Maksym Spiryagin,et al.  Application of flywheel energy storage for heavy haul locomotives , 2015 .

[19]  Luisa F. Cabeza,et al.  Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage , 2015 .

[20]  Seamus D. Garvey,et al.  Compressed air energy storage with liquid air capacity extension , 2015 .

[21]  Kimmo Kauhaniemi,et al.  Distributed cooperative control of battery energy storage system in AC microgrid applications , 2015 .

[22]  Laurent Pilon,et al.  Annual energy analysis of concrete containing phase change materials for building envelopes , 2015 .

[23]  Ch. Haberstroh,et al.  Exergy and cost analyses of hydrogen-based energy storage pathways for residual load management , 2015 .

[24]  Dong Li,et al.  Numerical analysis on thermal performance of roof contained PCM of a single residential building , 2015 .

[25]  M. Becherif,et al.  Hydrogen Energy Storage: New Techno-Economic Emergence Solution Analysis , 2015 .

[26]  J. Darkwa,et al.  Review of solid–liquid phase change materials and their encapsulation technologies , 2015 .

[27]  Mounir Baccar,et al.  Numerical study of PCM solidification in a finned tube thermal storage including natural convection , 2015 .

[28]  A. A. Attia,et al.  Effect of water based Al2O3 nanoparticle PCM on cool storage performance , 2015 .

[29]  D. Banerjee,et al.  Enhanced thermal properties of SiO2 nanocomposite for solar thermal energy storage applications , 2015 .

[30]  Luai M. Al-Hadhrami,et al.  Pumped hydro energy storage system: A technological review , 2015 .

[31]  L. Cabeza,et al.  Corrosion of metal containers for use in PCM energy storage , 2015 .

[32]  Xiang Wang,et al.  Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs) , 2015 .

[33]  G. Indira,et al.  Enhancing the design of a superconducting coil for magnetic energy storage systems , 2015 .

[34]  M. A. Medina,et al.  Assessing the integration of a thin phase change material (PCM) layer in a residential building wall for heat transfer reduction and management , 2015 .

[35]  Feifei Peng,et al.  Synthesis, characterization and thermal properties of paraffin microcapsules modified with nano-Al2O3 , 2015 .

[36]  S. Tiari,et al.  Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material , 2015 .

[37]  Yanping Yuan,et al.  Effect of carbon nanotubes on the thermal behavior of palmitic-stearic acid eutectic mixtures as phase change materials for energy storage , 2014 .

[38]  Rahmatollah Khodabandeh,et al.  A novel phase change material containing mesoporous silica nanoparticles for thermal storage : A study on thermal conductivity and viscosity , 2014 .

[39]  C. A. Infante Ferreira,et al.  Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications , 2014 .

[40]  Muhammad M. Rahman,et al.  Comparison between the single-PCM and multi-PCM thermal energy storage design , 2014 .

[41]  Romeu Vicente,et al.  Brick masonry walls with PCM macrocapsules: An experimental approach , 2014 .

[42]  Fariborz Haghighat,et al.  Designing building envelope with PCM wallboards: Design tool development , 2014 .

[43]  Manish K. Rathod,et al.  Experimental Investigations on Latent Heat Storage Unit using Paraffin Wax as Phase Change Material , 2014 .

[44]  Yingxin Zhu,et al.  Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning , 2014 .

[45]  T. Kousksou,et al.  Energy storage: Applications and challenges , 2014 .

[46]  J. Khodadadi,et al.  Experimental determination of temperature-dependent thermal conductivity of solid eicosane-based nanostructure-enhanced phase change materials , 2012 .

[47]  K. Cen,et al.  Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials , 2013 .

[48]  Andreas Sumper,et al.  Energy management of flywheel-based energy storage device for wind power smoothing , 2013 .

[49]  Kamaruzzaman Sopian,et al.  Enhance heat transfer for PCM melting in triplex tube with internal-external fins , 2013 .

[50]  Luisa F. Cabeza,et al.  Corrosion of metal and polymer containers for use in PCM cold storage , 2013 .

[51]  Elias K. Stefanakos,et al.  Thermal energy storage technologies and systems for concentrating solar power plants , 2013 .

[52]  Ching-Jenq Ho,et al.  An experimental study on melting heat transfer of paraffin dispersed with Al2O3 nanoparticles in a vertical enclosure , 2013 .

[53]  A. Alemrajabi,et al.  Phase change material for enhancing solar water heater, an experimental approach , 2013 .

[54]  Jean-Pierre Bédécarrats,et al.  Enhanced performances of macro-encapsulated phase change materials (PCMs) by intensification of the internal effective thermal conductivity , 2013 .

[55]  Avraham Shitzer,et al.  Numerical optimization of a PCM-based heat sink with internal fins , 2013 .

[56]  A. Sari,et al.  New kinds of energy-storing building composite PCMs for thermal energy storage , 2013 .

[57]  Jay M. Khodadadi,et al.  Thermal conductivity enhancement of paraffins by increasing the alignment of molecules through adding CNT/graphene , 2013 .

[58]  Narayana Prasad Padhy,et al.  Status of pumped hydro-storage schemes and its future in India , 2013 .

[59]  Changying Zhao,et al.  Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES) , 2013 .

[60]  Shuangfeng Wang,et al.  Experimental study on thermophysical properties of nanofluids as phase-change material (PCM) in low temperature cool storage , 2012 .

[61]  Yongsheng Lian,et al.  Numerical simulation of phase change material composite wallboard in a multi-layered building envelope , 2012 .

[62]  Pramod B. Salunkhe,et al.  A review on effect of phase change material encapsulation on the thermal performance of a system , 2012 .

[63]  Lixian Sun,et al.  Effects of copper nanowires on the properties of an organic phase change material , 2012 .

[64]  Kaushik Biswas,et al.  Field thermal performance of naturally ventilated solar roof with PCM heat sink , 2012 .

[65]  S. K. Tyagi,et al.  Phase change material (PCM) based thermal management system for cool energy storage application in building: An experimental study , 2012 .

[66]  Ya-Ling He,et al.  Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes , 2012 .

[67]  F. Bruno,et al.  Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems , 2012 .

[68]  Amir Faghri,et al.  Heat transfer and exergy analysis of cascaded latent heat storage with gravity-assisted heat pipes for concentrating solar power applications , 2012 .

[69]  Zhifeng Wang,et al.  Exergy analysis of two phase change materials storage system for solar thermal power with finite-time thermodynamics , 2012 .

[70]  Lin Pan,et al.  Preparation, characterization and thermal properties of micro-encapsulated phase change materials , 2012 .

[71]  Wei Li,et al.  Fabrication and morphological characterization of microencapsulated phase change materials (MicroPCMs) and macrocapsules containing MicroPCMs for thermal energy storage , 2012 .

[72]  Thomas Schmidt,et al.  Hydration and dehydration of salt hydrates and hydroxides for thermal energy storage - kinetics and energy release , 2012 .

[73]  Yvan Dutil,et al.  Experimental study of small-scale solar wall integrating phase change material , 2012 .

[74]  F. L. Tan,et al.  Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins , 2011 .

[75]  Xing Jin,et al.  Thermal analysis of a double layer phase change material floor , 2011 .

[76]  Luisa F. Cabeza,et al.  Compatibility of plastic with phase change materials (PCM) , 2011 .

[77]  X. Py,et al.  High performance storage composite for the enhancement of solar domestic hot water systems , 2011 .

[78]  A. Al-Ghandoor,et al.  Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems , 2010 .

[79]  Huaqing Xie,et al.  Enhancing thermal conductivity of palmitic acid based phase change materials with carbon nanotubes as fillers , 2010 .

[80]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[81]  R. Tamme,et al.  Development of PCM Storage for Process Heat and Power Generation , 2009 .

[82]  Hui Li,et al.  Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage , 2009 .

[83]  A. Sari,et al.  Microencapsulated n-octacosane as phase change material for thermal energy storage , 2009 .

[84]  Christian Ngô,et al.  Our Energy Future: Resources, Alternatives and the Environment , 2009 .

[85]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[86]  S. Iniyan,et al.  Phase change characteristic study of spherical PCMs in solar energy storage , 2009 .

[87]  José María Sala,et al.  Corrosion behaviour of several aluminium alloys in contact with a thermal storage phase change material based on Glauber’s salt , 2009 .

[88]  L. Cabeza,et al.  Utilization of phase change materials in solar domestic hot water systems , 2009 .

[89]  Zhong Xin,et al.  Thermal properties of paraffin based composites containing multi-walled carbon nanotubes , 2009 .

[90]  Hamid Ait Adine,et al.  Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials , 2009 .

[91]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[92]  D. Buddhi,et al.  Thermal cycling test of few selected inorganic and organic phase change materials , 2008 .

[93]  L. Cabeza,et al.  Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins , 2008 .

[94]  Ahmet Sarı,et al.  Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage , 2008 .

[95]  R. Seeniraj,et al.  Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs , 2008 .

[96]  K. Lafdi,et al.  Carbon nanoadditives to enhance latent energy storage of phase change materials , 2008 .

[97]  R. Velraj,et al.  Effect of double layer phase change material in building roof for year round thermal management , 2008 .

[98]  M. Ravikumar,et al.  PHASE CHANGE MATERIAL AS A THERMAL ENERGY STORAGE MATERIAL FOR COOLING OF BUILDING , 2008 .

[99]  K. Reddy.  Thermal Modeling of PCM-Based Solar Integrated Collector Storage Water Heating System , 2007 .

[100]  Jibao Shen,et al.  Numerical study on thermal behavior of classical or composite Trombe solar walls , 2007 .

[101]  E. Mettawee,et al.  Thermal conductivity enhancement in a latent heat storage system , 2007 .

[102]  R. Pitz-Paal,et al.  Cascaded latent heat storage for parabolic trough solar power plants , 2007 .

[103]  A. Sari,et al.  Capric acid and palmitic acid eutectic mixture applied in building wallboard for latent heat thermal energy storage , 2007 .

[104]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[105]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[106]  Ming Fang,et al.  Effects of different multiple PCMs on the performance of a latent thermal energy storage system , 2007 .

[107]  Hans Bernhoff,et al.  Flywheel energy and power storage systems , 2007 .

[108]  Miroslaw Zukowski,et al.  Experimental study of short term thermal energy storage unit based on enclosed phase change material in polyethylene film bag , 2007 .

[109]  E. Mettawee,et al.  Experimental study of a compact PCM solar collector , 2006 .

[110]  Yaşar Demirel,et al.  Thermoeconomics of seasonal latent heat storage system , 2006 .

[111]  K. Lafdi,et al.  Effect of multiple phase change materials (PCMs) slab configurations on thermal energy storage , 2006 .

[112]  H. Paksoy,et al.  Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material , 2006 .

[113]  Lv Shilei,et al.  Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage , 2006 .

[114]  L. Cabeza,et al.  Experimentation with a water tank including a PCM module , 2006 .

[115]  John Rekstad,et al.  Supercooling salt hydrates: Stored enthalpy as a function of temperature , 2006 .

[116]  Josep Illa,et al.  Exergetic optimization of solar collector and thermal energy storage system , 2006 .

[117]  K. F. Fong,et al.  Potential application of a centralized solar water-heating system for a high-rise residential building in Hong Kong , 2006 .

[118]  A. Sari.  Eutectic mixtures of some fatty acids for low temperature solar heating applications: Thermal properties and thermal reliability , 2005 .

[119]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[120]  J. Su,et al.  Preparation and mechanical properties of thermal energy storage microcapsules , 2005 .

[121]  J. K. Kaldellis,et al.  Feasibility analysis of domestic solar water heating systems in Greece , 2005 .

[122]  Aytunç Erek,et al.  Experimental and numerical investigation of thermal energy storage with a finned tube , 2005 .

[123]  S. D. Sharma,et al.  Thermal performance of a solar cooker based on an evacuated tube solar collector with a PCM storage unit , 2005 .

[124]  Soteris A. Kalogirou,et al.  Environmental benefits of domestic solar energy systems , 2004 .

[125]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[126]  U. Stritih.  An experimental study of enhanced heat transfer in rectangular PCM thermal storage , 2004 .

[127]  Katsunori Nagano,et al.  Performance of heat charge/discharge of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture to a single vertical tube for a latent heat storage system , 2004 .

[128]  S. D. Sharma,et al.  Phase Change Materials for Low Temperature Solar Thermal Applications , 2004 .

[129]  H. Cui,et al.  Thermal performance analysis for a heat receiver using multiple phase change materials , 2003 .

[130]  A. Sari.  Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications , 2003 .

[131]  G. Suppes,et al.  Latent heat characteristics of fatty acid derivatives pursuant phase change material applications , 2003 .

[132]  L. Cabeza,et al.  PCM-module to improve hot water heat stores with stratification , 2003 .

[133]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[134]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[135]  Kai Sirén,et al.  Analytical model for melting in a semi-infinite PCM storage with an internal fin , 2003 .

[136]  G. Sun,et al.  Mechanical strength of microcapsules made of different wall materials. , 2002, International journal of pharmaceutics.

[137]  A. Kürklü,et al.  Thermal performance of a water-phase change material solar collector , 2002 .

[138]  A. Bejan,et al.  Thermal Energy Storage: Systems and Applications , 2002 .

[139]  M. Hawlader,et al.  Encapsulated phase change materials for thermal energy storage: Experiments and simulation , 2002 .

[140]  Min Xiao,et al.  Thermal performance of a high conductive shape-stabilized thermal storage material , 2001 .

[141]  Guangming Chen,et al.  Experimental study on charging processes of a cylindrical heat storage capsule employing multiple‐phase‐change materials , 2001 .

[142]  Mohammed M. Farid,et al.  Underfloor heating with latent heat storage , 2001 .

[143]  D. W. Etheridge,et al.  Novel ventilation cooling system for reducing air conditioning in buildings.: Part I: testing and theoretical modelling , 2000 .

[144]  Andreas K. Athienitis,et al.  The effect of solar radiation on dynamic thermal performance of floor heating systems , 2000 .

[145]  M. Hadjieva,et al.  Composite salt-hydrate concrete system for building energy storage , 2000 .

[146]  Ibrahim Dincer.  Evaluation and selection of energy storage systems for solar thermal applications , 1999 .

[147]  John D. Rasberry,et al.  Microencapsulated phase-change materials as heat transfer media in gas-fluidized beds , 1998 .

[148]  A. Oliva,et al.  Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction , 1998 .

[149]  A. Mujumdar,et al.  Thermodynamic optimization of the thermal process in energy storage using multiple phase change materials , 1997 .

[150]  I. M. Bugaje,et al.  Enhancing the thermal response of latent heat storage systems , 1997 .

[151]  R. Velraj,et al.  Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit , 1997 .

[152]  Roman Domański,et al.  Exergy analysis for the evaluation of a thermal storage system employing PCMS with different melting temperatures , 1996 .

[153]  Cold heat-release characteristics of phase-change emulsion by air-emulsion direct-contact heat exchange method , 1996 .

[154]  B. Mikic,et al.  Integrated solar collector storage system based on a salt-hydrate phase-change material , 1995 .

[155]  Takayuki Watanabe,et al.  Second law optimization of a latent heat storage system with PCMS having different melting points , 1995 .

[156]  Afif Hasan,et al.  Thermal energy storage system with stearic acid as phase change material , 1994 .

[157]  A. Hasan.  Phase change material energy storage system employing palmitic acid , 1994 .

[158]  A. Sayigh,et al.  Some fatty acids as phase-change thermal energy storage materials , 1994 .

[159]  M. Lacroix.  Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube , 1993 .

[160]  Atsushi Kanzawa,et al.  Enhancement of charging and discharging rates in a latent heat storage system by use of PCM with different melting temperatures , 1993 .

[161]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[162]  D. Feldman,et al.  Energy storage composite with an organic PCM , 1989 .

[163]  D. Feldman,et al.  Fatty acids and their mixtures as phase-change materials for thermal energy storage , 1989 .

[164]  F. C. Porisini.  Salt hydrates used for latent heat storage: Corrosion of metals and reliability of thermal performance , 1988 .

[165]  P. Padmanabhan,et al.  Outward phase change in a cylindrical annulus with axial fins on the inner tube , 1986 .

[166]  D. Feldman,et al.  Organic phase change materials for thermal energy storage , 1986 .

[167]  S. Sarig,et al.  A calorimetric investigation of the stability of stagnant calcium chloride hexahydrate melt , 1984 .

[168]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[169]  Maria Telkes,et al.  Thermal energy storage in salt hydrates , 1980 .

[170]  D. Biswas,et al.  Thermal energy storage using sodium sulfate decahydrate and water , 1977 .