Polymer-coated fiber Bragg grating for relative humidity sensing

A fiber-optic-based humidity sensor has been fabricated using a fiber Bragg grating (FBG) coated with a moisture-sensitive polymer. The sensing concept exploits the inherent characteristics of the FBG and is based on the strain effect induced in the Bragg grating through the swelling of the polymer coating. A direct indication of the humidity level is given by the shift of the Bragg wavelength caused by the expansion of the sensing material. The FBG sensor used in this work has an approximate coating thickness of 33 /spl mu/m and was exposed to different humidity levels at room temperature. The sensitivity of the sensor was estimated to be about 4.5 pm/%RH at a wavelength of 1535 nm, this being obtained through a process of linear regression. The resulting uncertainty in the measurement is /spl plusmn/4%RH and the response time of the sensor and the moisture expansion coefficient of polyimide were obtained from a series of experimental investigations and cross compared with the results of previous work.

[1]  Gerald Gerlach,et al.  A piezoresistive humidity sensor , 1994 .

[2]  Andreas Othonos,et al.  Bragg Gratings in Optical Fibers: Fundamentals and Applications , 2000 .

[3]  Eric Udd,et al.  Fiber optic grating moisture and humidity sensors , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Ramaier Narayanaswamy,et al.  Optical fibre sensors for chemical species , 1988 .

[5]  Kimihiro Adachi,et al.  A novel fiber-optic gas-sensing configuration using extremely curved optical fibers and an attempt for optical humidity detection , 1998 .

[6]  Kenneth T. V. Grattan,et al.  Fiber optic sensor for dual measurement of temperature and strain using a combined fluorescence lifetime decay and fiber Bragg grating technique , 2001 .

[7]  K. S. Fletcher,et al.  Optical sensor for the determination of moisture , 1985 .

[8]  K. Hill,et al.  Fiber Bragg grating technology fundamentals and overview , 1997 .

[9]  P. Rastogi,et al.  Relative humidity sensor with optical fiber Bragg gratings. , 2002, Optics letters.

[10]  Yoshiro Sakai,et al.  Optical humidity sensing characteristics of Nafion—dyes composite thin films , 1992 .

[11]  Kenneth T. V. Grattan,et al.  Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: studies at temperatures up to 1500 °C , 2001 .

[12]  P. R. Wiederhold.  Water Vapor Measurement: Methods and Instrumentation , 1997 .

[13]  Martin M. F. Choi,et al.  Humidity-sensitive optode membrane based on a fluorescent dye immobilized in gelatin film , 1999 .

[14]  Kangsheng Chen,et al.  Fiber optic Bragg grating sensor based on hydrogels for measuring salinity , 2002 .

[15]  H. Bau,et al.  Sensors: A Comprehensive Survey , 1996 .

[16]  Z. M. Rittersma,et al.  Recent achievements in miniaturised humidity sensors—a review of transduction techniques , 2002 .

[17]  Y. Rao,et al.  Fiber Bragg grating sensors: principles and applications , 1998 .

[18]  Michael A. Davis,et al.  Fiber grating sensors , 1997 .

[19]  L. Greenspan.  Humidity Fixed Points of Binary Saturated Aqueous Solutions , 1977, Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry.

[20]  Andreas Schroth,et al.  Humidity-dependent mechanical properties of polyimide films and their use for IC-compatible humidity sensors , 1996 .

[21]  B. Sutapun,et al.  Pd-coated elastooptic fiber optic Bragg grating sensors for multiplexed hydrogen sensing , 1999 .

[22]  Banshi D. Gupta,et al.  A novel probe for a fiber optic humidity sensor , 2001 .

[23]  Pascal Kronenberg,et al.  Influence of humidity and temperature on polyimide-coated fiber Bragg gratings , 2001 .