Experimental assessment of biomechanical properties in human male elbow bone subjected to bending and compression loads

This work discusses the biomechanical testing of 3 elbow bones, namely the humerus, ulna, and radius. There is a need to identify the mechanical properties of the bones at the organ level. The following tests were performed: 3-point bending, fracture toughness, and axial compression. Six sets of whole-bone samples of human male cadaveric humerus, ulna, and radius (age of donor: 35 to 56 years) were tested. The results were analyzed for statistical significance by 2-stage, repeated-measure analysis of variance (ANOVA). The difference between the bending strength of the humerus, ulna, and radius was statistically significant (P = .001) when compared to one another. However, the fracture toughness and compressive strength were observed to be similar for the 3 bones. The knowledge of mechanical properties of elbow bones can aid in the design of elbow implants and upper limb protection systems, and also allow us to identify criteria for injury. Further, knowledge of the mechanical properties of the elbow bones can aid in calibrating simulations through finite elements analysis.

[1]  G. Kiebzak Age-related bone changes , 1991, Experimental Gerontology.

[2]  R. Ritchie,et al.  Intrinsic mechanical behavior of femoral cortical bone in young, osteoporotic and bisphosphonate-treated individuals in low- and high energy fracture conditions , 2016, Scientific Reports.

[3]  K. Mithraratne,et al.  A finite element model to investigate the effect of ulnar variance on distal radioulnar joint mechanics , 2017, International journal for numerical methods in biomedical engineering.

[4]  P. Rommens,et al.  Compression-locked nailing of the humerus: a mechanical analysis. , 2007, Acta orthopaedica.

[5]  D. Andrews,et al.  Development and validation of a distal radius finite element model to simulate impact loading indicative of a forward fall , 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[6]  R. B. Ashman,et al.  Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.

[7]  S. O’Driscoll,et al.  Total elbow prosthesis loosening caused by ulnar component pistoning. , 2007, The Journal of bone and joint surgery. American volume.

[8]  C H Turner,et al.  Basic biomechanical measurements of bone: a tutorial. , 1993, Bone.

[9]  E. Chao,et al.  Biomechanical Comparison of Antegrade and Retrograde Nailing of Humeral Shaft Fracture , 1998, Clinical orthopaedics and related research.

[10]  J W Melvin,et al.  Fracture mechanics of bone. , 1993, Journal of biomechanical engineering.

[11]  Xuanliang N. Dong,et al.  Orientation dependence of progressive post-yield behavior of human cortical bone in compression. , 2012, Journal of biomechanics.

[12]  R O Ritchie,et al.  Effect of aging on the transverse toughness of human cortical bone: evaluation by R-curves. , 2011, Journal of the mechanical behavior of biomedical materials.

[13]  D Vashishth,et al.  Fracture toughness of human bone under tension. , 1995, Journal of biomechanics.

[14]  A. Burstein,et al.  The elastic modulus for bone. , 1974, Journal of biomechanics.

[15]  T. Keller,et al.  Young's modulus, bending strength, and tissue physical properties of human compact bone , 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[16]  Joshua E. Johnson,et al.  Validation of a new multiscale finite element analysis approach at the distal radius. , 2017, Medical engineering & physics.

[17]  A. Bull,et al.  Simulation of bone-determined range of motion in proximal humeral fractures , 2018, Shoulder & elbow.

[18]  H. Sievänen,et al.  Three‐Point Bending of Rat Femur in the Mediolateral Direction: Introduction and Validation of a Novel Biomechanical Testing Protocol , 2006, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[19]  O. Lindahl,et al.  Cortical bone in man. 3. Variation of compressive strength with age and sex. , 1968, Acta orthopaedica Scandinavica.

[20]  Y. Toyama,et al.  Computer simulation of humeral shaft fracture in throwing. , 2010, Journal of shoulder and elbow surgery.

[21]  L Cristofolini,et al.  Mechanical validation of whole bone composite femur models. , 1996, Journal of biomechanics.

[22]  J. Currey,et al.  What determines the bending strength of compact bone? , 1999, The Journal of experimental biology.

[23]  A. Cappello,et al.  Mechanical validation of whole bone composite tibia models. , 2000, Journal of biomechanics.

[24]  A. Boskey,et al.  Contribution of Mineral to Bone Structural Behavior and Tissue Mechanical Properties , 2010, Calcified Tissue International.

[25]  S A Goldstein,et al.  Heterogeneity of bone lamellar-level elastic moduli. , 2000, Bone.

[26]  J. J. Mecholsky,et al.  Fracture toughness and work of fracture of hydrated, dehydrated, and ashed bovine bone. , 2008, Journal of biomechanics.

[27]  M Martens,et al.  Aging of bone tissue: mechanical properties. , 1976, The Journal of bone and joint surgery. American volume.

[28]  P Zioupos,et al.  Changes in the stiffness, strength, and toughness of human cortical bone with age. , 1998, Bone.

[29]  J. Tehranzadeh,et al.  Relationships between material properties and CT scan data of cortical bone with and without metastatic lesions. , 2003, Medical engineering & physics.

[30]  W C Hayes,et al.  Mechanical properties of metaphyseal bone in the proximal femur. , 1991, Journal of biomechanics.

[31]  P. Rommens,et al.  Compression-locked nailing of the humerus: A mechanical analysis , 2007 .

[32]  V. Bousson,et al.  Prediction of mechanical properties of cortical bone by quantitative computed tomography. , 2008, Medical engineering & physics.

[33]  M Martens,et al.  Mechanical behaviour of femoral bones in bending loading. , 1986, Journal of biomechanics.

[34]  T. Wright,et al.  What Design and Material Factors Impact the Wear and Corrosion Performance in Total Elbow Arthroplasties? , 2014, Clinical orthopaedics and related research.

[35]  D Mitton,et al.  Apparent Young's modulus of human radius using inverse finite-element method. , 2007, Journal of biomechanics.

[36]  P. Evans,et al.  Failure of the hinge mechanism in total elbow arthroplasty. , 2010, Journal of shoulder and elbow surgery.

[37]  M. Osteaux,et al.  Cortical mineral content of the radius assessed by peripheral QCT predicts compressive strength on biomechanical testing. , 1995, Bone.

[38]  R O Ritchie,et al.  Effect of aging on the toughness of human cortical bone: evaluation by R-curves. , 2004, Bone.

[39]  R. Ritchie,et al.  Measurement of the toughness of bone: a tutorial with special reference to small animal studies. , 2008, Bone.

[40]  W C Hayes,et al.  Trabecular bone modulus and strength can depend on specimen geometry. , 1993, Journal of biomechanics.

[41]  Bernd Gludovatz,et al.  Fracture resistance of human cortical bone across multiple length-scales at physiological strain rates. , 2014, Biomaterials.

[42]  T. Keller Predicting the compressive mechanical behavior of bone. , 1994, Journal of biomechanics.

[43]  C. M. Agrawal,et al.  Age-related changes in the collagen network and toughness of bone. , 2002, Bone.

[44]  J. Xavier,et al.  Fracture Characterization of Human Cortical Bone Under Mode I Loading. , 2015, Journal of biomechanical engineering.

[45]  Ego Seeman,et al.  Clinical and basic research papers - April 2005 selections , 2005 .

[46]  Karl Entacher,et al.  Multi-patient finite element simulation of keeled versus pegged glenoid implant designs in shoulder arthroplasty , 2015, Medical & Biological Engineering & Computing.

[47]  P. Thurner,et al.  Toughness and damage susceptibility in human cortical bone is proportional to mechanical inhomogeneity at the osteonal-level. , 2015, Bone.

[48]  A. Boskey,et al.  Bone composition: relationship to bone fragility and antiosteoporotic drug effects. , 2013, BoneKEy reports.

[49]  Daniel E Lieberman,et al.  Predicting long bone loading from cross-sectional geometry. , 2004, American journal of physical anthropology.

[50]  Stuart J Warden,et al.  A comparison of mechanical properties derived from multiple skeletal sites in mice. , 2005, Journal of biomechanics.

[51]  A. Burstein,et al.  The elastic and ultimate properties of compact bone tissue. , 1975, Journal of biomechanics.

[52]  J M Jurist,et al.  Human ulnar bending stiffness, mineral content, geometry and strength. , 1977, Journal of biomechanics.

[53]  C. Hirsch,et al.  Factors affecting the determination of the physical properties of femoral cortical bone. , 1966, Acta orthopaedica Scandinavica.

[54]  R O Ritchie,et al.  The true toughness of human cortical bone measured with realistically short cracks. , 2008, Nature materials.

[55]  S. M. Rajaai,et al.  How Does The Bone Shaft Geometry Affect its Bending Properties , 2009 .

[56]  R O Ritchie,et al.  Fracture in human cortical bone: local fracture criteria and toughening mechanisms. , 2005, Journal of biomechanics.