论文信息 - Status of the Development of Superconducting Undulators at the Advanced Photon Source - 字舞流文

Status of the Development of Superconducting Undulators at the Advanced Photon Source

Y. Ivanyushenkov | J. Fuerst | E. Gluskin | I. Kesgin | Q. Hasse | M. Kasa | Y. Shiroyanagi

[1] Y. Ivanyushenkov,et al. A second-generation superconducting undulator cryostat for the APS , 2017 .

[2] Michael Borland,et al. Development and operating experience of a 1.1-m-long superconducting undulator at the Advanced Photon Source , 2017 .

[3] V. Selvamanickam,et al. Je(4.2 K, 31.2 T) beyond 1 kA/mm2 of a ~3.2 μm thick, 20 mol% Zr-added MOCVD REBCO coated conductor , 2017, Scientific Reports.

[4] Y. Ivanyushenkov,et al. High-temperature superconducting undulator magnets , 2017 .

[5] T. Fukushima,et al. 2G HTS wires made on 30 μm thick Hastelloy substrate , 2016 .

[6] Y. Ivanyushenkov,et al. Feasibility and electromagnetic analysis of a REBCO superconducting undulator , 2016 .

[7] Y. Ivanyushenkov,et al. Design of a REBCO thin film superconducting undulator , 2015 .

[8] E. Gluskin. Development and Performance of Superconducting Undulators at the Advanced Photon Source , 2015 .

[9] D. J. Robinson,et al. Development and operating experience of a short-period superconducting undulator at the Advanced Photon Source , 2015 .

[10] Y. Ivanyushenkov,et al. Development of Superconducting Undulators at the Advanced Photon Source , 2011 .

[11] E. G. Miginsky,et al. A MULTIPOLE SUPERCONDUCTING WIGGLER FOR CANADIAN LIGHT SOURCE , 2006 .