Mitigated membrane fouling in an SMBR by surface modification

Abstract Fouling is a major obstacle in membrane processes applied in membrane bioreactor. To improve the antifouling characteristics of polypropylene hollow fiber microporous membranes (PPHFMMs) in a submerged membrane bioreactor (SMBR), the PPHFMMs were surface modified by NH 3 , CO 2 plasma treatment, photoinduced graft polymerization of acrylamide and acrylic acid. The structural and morphological changes on the membrane surface were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (FT-IR/ATR) and field emission scanning electron microscopy (FE-SEM). The change of surface wettability was monitored by contact angle measurements. The results of XPS and FT-IR/ATR clearly indicated the successful modification on the membrane surface. The static water contact angle of the modified membrane reduced obviously. The antifouling characteristics of the modified membranes in an SMBR were evaluated. The modified membranes showed better filtration performances in the submerged membrane bioreactor than the unmodified one, and the acrylic acid-grafted membrane presented the best antifouling characteristics. The results demonstrated that (1) the surface carboxyl-containing membranes were better than the surface amido-containing membranes; (2) surface-grafted membranes were better than the plasma-treated membranes.

[1]  Vicki Chen,et al.  Evolution of fouling during crossflow filtration of model EPS solutions , 2005 .

[2]  Seoktae Kang,et al.  Mitigated membrane fouling in a vertical submerged membrane bioreactor (VSMBR) , 2006 .

[3]  Michelle L. Steen,et al.  Hydrophilic modification of polymeric membranes by low temperature H2O plasma treatment , 2002 .

[4]  Gary Amy,et al.  Identification of nanofiltration membrane foulants. , 2007, Water research.

[5]  E. R. Fisher,et al.  Membrane Surface Modification by Plasma-Induced Polymerization of Acrylamide for Improved Surface Properties and Reduced Protein Fouling , 2003 .

[6]  J. Kaloustian,et al.  Polypropylene natural aging studied by X-ray photoelectron spectroscopy , 2000 .

[7]  Y. Lee,et al.  Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics , 2001 .

[8]  Xian‐Wen Wei,et al.  Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: N2 plasma treatment. , 2007, Water research.

[9]  G. Belfort,et al.  Intermolecular Forces between a Protein and a Hydrophilic Modified Polysulfone Film with Relevance to Filtration. , 2000 .

[10]  Zhi-Kang Xu,et al.  Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment , 2005 .

[11]  G. Belfort,et al.  UV-Assisted Graft Polymerization of N-Vinyl-2-pyrrolidinone onto Poly(ether sulfone) Ultrafiltration Membranes Using Selective UV Wavelengths , 2002 .

[12]  Li-ping Zhu,et al.  Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes , 2007 .

[13]  Erhan Pişkin,et al.  Functional copolymers of N-isopropylacrylamide for bioengineering applications , 2007 .

[14]  Jaeweon Cho,et al.  Occurrence and removal of pharmaceuticals and endocrine disruptors in South Korean surface, drinking, and waste waters. , 2007, Water research.

[15]  Renbi Bai,et al.  MEMBRANE FOULING AND CLEANING IN MICROFILTRATION OF ACTIVATED SLUDGE WASTEWATER , 2003 .

[16]  Zhi-Kang Xu,et al.  Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment , 2005 .

[17]  Vinod T. Kuberkar,et al.  Modeling of fouling reduction by secondary membranes , 2000 .

[18]  Xian‐Wen Wei,et al.  Photoinduced graft polymerization to improve antifouling characteristics of an SMBR , 2007 .

[19]  G. Belfort,et al.  Increasing membrane permeability of UV-modified poly(ether sulfone) ultrafiltration membranes , 2002 .

[20]  M. Suidan,et al.  Bioremediation of groundwater contaminated with gasoline hydrocarbons and oxygenates using a membrane-based reactor. , 2006, Environmental science & technology.

[21]  Rong Wang,et al.  Development of a novel electrophoresis-UV grafting technique to modify PES UF membranes used for NOM removal , 2006 .

[22]  Y. Comeau,et al.  Optimization of plasma proteins concentration by ultrafiltration , 1998 .

[23]  Hongwei Ma,et al.  Surface engineering strategies for control of protein and cell interactions , 2004 .

[24]  Zhi-Kang Xu,et al.  Improvement of the antifouling characteristics for polypropylene microporous membranes by the sequential photoinduced graft polymerization of acrylic acid , 2006 .

[25]  Joseph D. Andrade,et al.  Protein—surface interactions in the presence of polyethylene oxide: II. Effect of protein size , 1991 .

[26]  Y. Watanabe,et al.  Membrane biofouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater: impact of biofilm formation. , 2007, Environmental science & technology.

[27]  Joseph D. Andrade,et al.  Protein—surface interactions in the presence of polyethylene oxide , 1991 .

[28]  A. Holländer.  Surface oxidation inside of macroscopic porous polymeric materials , 2005 .

[29]  D. Jenkins,et al.  Influence of mixed liquor properties and aeration intensity on membrane fouling in a submerged membrane bioreactor at high mixed liquor suspended solids concentrations. , 2007, Water research.

[30]  M. Balakrishnan,et al.  Via surface functionalization by photograft copolymerization to low-fouling polyethersulfone-based ultrafiltration membranes , 2007 .

[31]  Qiang Sun,et al.  Pluronic polymers and polyethersulfone blend membranes with improved fouling-resistant ability and ultrafiltration performance , 2006 .

[32]  Hang-Sik Shin,et al.  Sludge characteristics and their contribution to microfiltration in submerged membrane bioreactors , 2003 .

[33]  Pierre Le-Clech,et al.  Fouling in membrane bioreactors used in wastewater treatment , 2006 .

[34]  In-Soung Chang,et al.  Effects of membrane fouling on solute rejection during membrane filtration of activated sludge , 2001 .

[35]  Eberhard Staude,et al.  Surface modification of polysulfone ultrafiltration membranes and fouling by BSA solutions , 1997 .

[36]  P. Prádanos,et al.  Pore Size Distributions in Microporous Membranes II. Bulk Characterization of Track-Etched Filters by Air Porometry and Mercury Porosimetry , 1995 .

[37]  A Pollice,et al.  Physical characteristics of the sludge in a complete retention membrane bioreactor. , 2007, Water research.

[38]  E. Kang,et al.  Synthesis and magnetic properties of the Ho(BA)2AA complex monomer and its copolymer with MMA , 2001 .

[39]  N. Love,et al.  The role of extracellular polymeric substances in the toxicity response of activated sludge bacteria to chemical toxins. , 2007, Water research.

[40]  M. Mänttäri,et al.  Modification of NF membrane properties by in situ redox initiated graft polymerization with hydrophilic monomers , 2004 .

[41]  I. Gancarz,et al.  Modification of polysulfone membranes 1. CO2 plasma treatment , 1999 .

[42]  I. Gancarz,et al.  Modification of polysulfone membranes. 4. Ammonia plasma treatment , 2002 .

[43]  D. Bodas,et al.  Hydrophilization and hydrophobic recovery of PDMS by oxygen plasma and chemical treatment—An SEM investigation , 2007 .

[44]  Neelesh A. Patankar,et al.  On the Modeling of Hydrophobic Contact Angles on Rough Surfaces , 2003 .

[45]  Zhi-Kang Xu,et al.  Photoinduced graft polymerization of acrylamide on polypropylene microporous membranes for the improvement of antifouling characteristics in a submerged membrane-bioreactor , 2007 .

[46]  Georges Belfort,et al.  Low fouling synthetic membranes by UV-assisted graft polymerization: monomer selection to mitigate fouling by natural organic matter , 2003 .

[47]  Sung-Woon Myung,et al.  Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma. , 2006, Journal of colloid and interface science.