Research of kinematics parameter calibration for robot manipulator based on measuring method

Robot calibration is one of the key technologies of off-line programming, and measuring method is an important factor which restrict its development. According to this, this paper gives an analysis of robot modeling errors, which is based on the robot error source, and gives an easy way of measuring the six degree freedom robot, and based on that, a real robot kinematics model is set up. According to the result of measurement, it also sets up a complete, proportional and consecutive kinematical model that identify the geometric structure of the robot parameters easily, and the robot's absolute accuracy is improved.

[1]  Gregory C. Smith,et al.  A non-contact method for detecting on-line industrial robot position errors using a microwave doppler radar motion detector , 2006 .

[2]  R. S. McMaster,et al.  A robot cell calibration algorithm and its use with a 3D measuring system , 1997, ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics.

[3]  Giovanni Legnani,et al.  Three methodologies for the calibration of industrial manipulators: Experimental results on a SCARA robot , 2000 .

[4]  G. D. van Albada,et al.  Advances in robot calibration: Modelling, Parameter Identification, Measurement , 1994 .

[5]  Fan LiangZhi,et al.  Kinematic calibration for a hybrid 5DOF manipulator based on 3-RPS in-actuated parallel manipulator , 2005 .

[6]  Chia-Hsiang Menq,et al.  Determination of Optimal Measurement Configurations for Robot Calibration Based on Observability Measure , 1991, Int. J. Robotics Res..

[7]  Giovanni Legnani,et al.  Three methodologies for the calibration of industrial manipulators: Experimental results on a SCARA robot , 2000, J. Field Robotics.

[8]  Hanqi Zhuang,et al.  Robot calibration by mobile camera systems , 1994, J. Field Robotics.

[9]  R. S. McMaster,et al.  Improving robot calibration results using modeling optimization , 1997, ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics.

[10]  Hans-Gerd Maas,et al.  Dynamic photogrammetric calibration of industrial robots , 1997, Optics & Photonics.

[11]  Gregory C. Smith,et al.  A non-contact method for detecting on-line industrial robot position errors using a microwave Doppler radar motion detector , 2006 .

[12]  Gregory C. Smith.  A Non-Contact Method for Detecting On-Line Industrial Robot Position Errors , 2006 .

[13]  Joachim O. Berg.  Path and orientation accuracy of industrial robots , 1993 .