论文信息 - Wind Tunnel Aeroacoustic Measurements of a 26%-scale 777 Main Landing Gear - 字舞流文

Wind Tunnel Aeroacoustic Measurements of a 26%-scale 777 Main Landing Gear

Ricardo A. Burdisso | Wing Ng | Patricio A. Ravetta | R. Burdisso | W. Ng

[1] Yueping Guo,et al. Airframe Noise Source Locations of a 777 Aircraft in Flight and Comparisons with Past Model-Scale Tests , 2003 .

[2] Fei Li,et al. Aeroacoustic Analysis of a Simplified Landing Gear , 2003 .

[3] William M. Humphreys,et al. Performance Analysis of a Cost-Effective Electret Condenser Microphone Directional Array , 2003 .

[4] Hugues Remy,et al. Landing Gears and High Lift Devices Airframe Noise Research , 2002 .

[5] Nathan Burnside,et al. MICROPHONE ARRAY ASSESSMENT OF AN ISOLATED, 26%-SCALE, HIGH-FIDELITY LANDING GEAR , 2002 .

[6] Werner Dobrzynski,et al. Research into Landing Gear Airframe Noise Reduction , 2002 .

[7] Robert W. Stoker,et al. Investigations of airframe noise in pressurized wind tunnels , 2001 .

[8] Rahul Sen,et al. An experimental investigation of airframe noise using a model-scale Boeing 777 , 2001 .

[9] Werner Dobrzynski,et al. A European Study on Landing Gear Airframe Noise Sources , 2000 .

[10] Stephen M. Jaeger,et al. EFFECT OF SURFACE TREATMENT ON ARRAY MICROPHONE SELF-NOISE , 2000 .

[11] Jr William M. Humphreys,et al. Design and Use of Microphone Directional Arrays for Aeroacoustic Measurements , 1998 .

[12] S. Jaeger,et al. Acoustic measurements of a model semi-span symmetry plane , 1996 .