A MOST PROBABLE POINT BASED METHOD FOR UNCERTAINTY ANALYSIS

Uncertainty is inevitable at every stage of the life cycle development of a product. To make use of probabilistic information and to make reliable decisions by incorporating decision maker’s risk attitude under uncertainty, methods for propagating the effect of uncertainty are therefore needed. When designing complex systems, the efficiency of methods for uncertainty analysis becomes critical. In this paper, a most probable point (MPP) based uncertainty analysis (MPPUA) method is proposed. The concept of the MPP is utilized to generate the cumulative distribution function (CDF) of a system output by evaluating the probability estimates at a serial of limit states. To improve the efficiency of locating the MPP, a novel MPP search algorithm is presented that employs a set of searching strategies, including evaluating derivatives to direct a search, tracing the MPP locus, and predicting the initial point for MPP search. A mathematical example and the Pratt & Whitney (PW) engine design are used to verify the effectiveness of the proposed method. With the MPPUA method, the probabilistic distribution of a system output can be generated across the whole range of its performance.

[1]  Wei Chen,et al.  Towards a Better Understanding of Modeling Feasibility Robustness in Engineering Design , 2000 .

[2]  Kathryn B. Laskey.  Model uncertainty: theory and practical implications , 1996, IEEE Trans. Syst. Man Cybern. Part A.

[3]  Reuven Y. Rubinstein,et al.  Simulation and the Monte Carlo method , 1981, Wiley series in probability and mathematical statistics.

[4]  Richard de Neufville,et al.  Applied systems analysis , 1990 .

[5]  José Carlos Pinto.  On the costs of parameter uncertainties. Effects of parameter uncertainties during optimization and design of experiments , 1998 .

[6]  A. M. Hasofer,et al.  Exact and Invariant Second-Moment Code Format , 1974 .

[7]  Palle Thoft-Christensen,et al.  Reliability and optimization of structural systems '90 : proceedings of the 3rd IFIP WG 7.5 Conference, Berkeley, California, USA, March 26-28, 1990 , 1991 .

[8]  John E. Renaud,et al.  AN INVESTIGATION OF MULTIDISCIPLINARY DESIGN SUBJECT TO UNCERTAINTY , 1998 .

[9]  George A. Hazelrigg,et al.  A Framework for Decision-Based Engineering Design , 1998 .

[10]  Xiaoping Du,et al.  AN EFFICIENT APPROACH TO PROBABILISTIC UNCERTAINTY ANALYSIS IN SIMULATION-BASED MULTIDISCIPLINARY DESIGN , 2000 .

[11]  William Manners.  Classification and Analysis of Uncertainty in Structural Systems , 1991 .

[12]  Cheng Wang,et al.  Parametric uncertainty analysis for complex engineering systems , 1999 .

[13]  Xiaoping Du,et al.  Propagation and Management of Uncertainties in Simulation-Based Collaborative Systems Design , 1999 .

[14]  A. Kiureghian,et al.  Second-Order Reliability Approximations , 1987 .

[15]  L. Tvedt.  Distribution of quadratic forms in normal space-application to structural reliability , 1990 .

[16]  S. Isukapalli.  UNCERTAINTY ANALYSIS OF TRANSPORT-TRANSFORMATION MODELS , 1999 .

[17]  Ove Ditlevsen,et al.  Solution of a class of load combination problems by directional simulation , 1986 .

[18]  A. E. Sepulveda,et al.  Approximation of System Reliabilities Using a Shooting Monte Carlo Approach , 1997 .

[19]  R. Rackwitz,et al.  Quadratic Limit States in Structural Reliability , 1979 .

[20]  M. Rosenblatt.  Remarks on a Multivariate Transformation , 1952 .

[21]  Farrokh Mistree,et al.  Statistical Approximations for Multidisciplinary Design Optimization: The Problem of Size , 1999 .

[22]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[23]  Athanasios Papoulis,et al.  Probability, Random Variables and Stochastic Processes , 1965 .

[24]  George A. Hazelrigg,et al.  An Axiomatic Framework for Engineering Design , 1999 .

[25]  Farrokh Mistree,et al.  A procedure for robust design: Minimizing variations caused by noise factors and control factors , 1996 .

[26]  S. Isukapalli,et al.  Stochastic Response Surface Methods (SRSMs) for Uncertainty Propagation: Application to Environmental and Biological Systems , 1998, Risk analysis : an official publication of the Society for Risk Analysis.

[27]  Jean-Claude Mitteau.  Error evaluations for the computation of failure probability in static structural reliability problems , 1999 .

[28]  Carl D. Sorensen,et al.  A general approach for robust optimal design , 1993 .

[29]  Y.-T. Wu.  Methods for efficient probabilistic analysis of systems with large number of random variables , 1998 .

[30]  G. Hazelrigg.  Systems Engineering: An Approach to Information-Based Design , 1996 .

[31]  Wei Chen,et al.  ROBUST CONCEPT EXPLORATION OF PROPULSION SYSTEMS WITH ENHANCED MODEL APPROXIMATION CAPABILITIES , 2000 .

[32]  S. Brown,et al.  Approximation of system reliability using a shooting Monte Carlo approach , 1994 .

[33]  David R. Oakley,et al.  Multidisciplinary Stochastic Optimization , 1995 .

[34]  R. Rackwitz,et al.  New light on first- and second-order reliability methods , 1987 .

[35]  Harald Niederreiter,et al.  Random number generation and Quasi-Monte Carlo methods , 1992, CBMS-NSF regional conference series in applied mathematics.

[36]  K. Breitung.  Asymptotic approximations for multinormal integrals , 1984 .

[37]  J. S. Hunter,et al.  Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building. , 1979 .

[38]  Dimitri N. Mavris,et al.  Robust Design Simulation: A Probabilistic Approach to Multidisciplinary Design , 1999 .

[39]  Dimitri N. Mavris,et al.  Uncertainty Modeling and Management in Multidisciplinary Analysis and Synthesis , 2000 .

[40]  T. Cruse,et al.  Advanced probabilistic structural analysis method for implicit performance functions , 1990 .

[41]  K. Breitung.  Asymptotic Approximation for Multi-normal Integrals , 1984 .

[42]  Milík Tichý.  Applied Methods of Structural Reliability , 1993 .