Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam
暂无分享,去创建一个
[1] M. Lewandowska,et al. Evaluation of mechanical properties and anisotropy of ultra-fine grained 1050 aluminum sheets produced by incremental ECAP , 2017 .
[2] L. Zhuang,et al. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing , 2017 .
[3] Guoqun Zhao,et al. Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds , 2017 .
[4] H. Miura,et al. Effects of aging on mechanical properties and microstructure of multi-directionally forged 7075 aluminum alloy , 2017 .
[5] Guoqun Zhao,et al. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization , 2017 .
[6] Qing Liu,et al. Quantitative study of dissolution of Mg2Si during solution treatment in AA6014 alloy , 2017 .
[7] Bing Chen,et al. Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation , 2017 .
[8] A. Rollett,et al. Mesoscopic coupled modeling of texture formation during recrystallization considering stored energy decomposition , 2017 .
[9] Guoqun Zhao,et al. Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies , 2017 .
[10] Guoqun Zhao,et al. Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles , 2016 .
[11] Amauri Garcia,et al. Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al–Si–Cu alloy , 2016 .
[12] W. J. Kim,et al. Difference in the Hot Compressive Behavior and Processing Maps between the As-cast and Homogenized Al-Zn-Mg-Cu (7075) Alloys , 2016 .
[13] F. Pan,et al. Tailoring the textures and mechanical properties of AZ31 alloy sheets using asymmetric composite extrusion , 2016 .
[14] Ying-hong Peng,et al. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion , 2016 .
[15] Y. Chen,et al. Effects of solution treatment on microstructure and mechanical properties of powder thixoforming 6061 aluminum alloy , 2016 .
[16] Z. Yin,et al. Effects of solution treatment on microstructural and mechanical properties of Al–Zn–Mg alloy by microalloying with Sc and Zr , 2016 .
[17] I. Samajdar,et al. Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy , 2016 .
[18] M. Janeček,et al. Microstructure characterization of LAE442 magnesium alloy processed by extrusion and ECAP , 2016 .
[19] M. Ohno,et al. Grain Refinement and Ductility Improvement by Hot Extrusion Using a Heteromorphic Die with Small Holes , 2016 .
[20] Xuefeng Tang,et al. Influence of solution heat treatment on mechanical response and fracture behaviour of aluminium alloy sheets: An experimental study , 2015 .
[21] L. Zhuang,et al. Effect of solution time on microstructure, texture and mechanical properties of Al–Mg–Si–Cu alloys , 2015 .
[22] Kanghua Chen,et al. Evolution of the second phase particles during the heating-up process of solution treatment of Al–Zn–Mg–Cu alloy , 2015 .
[23] P. Yao,et al. Effects of solution treatment on microstructure and mechanical properties of thixoformed Mg2Sip/AM60B composite , 2015 .
[24] Guo Wei,et al. Evolution of precipitate microstructure during stress aging of an Al–Zn–Mg–Cu alloy , 2015 .
[25] P. P. Bhattacharjee,et al. Annealing textures of severely cold and warm-rolled Al–2.5 wt.%Mg alloy , 2014 .
[26] L. Katgerman,et al. The origin of weld seam defects related to metal flow in the hot extrusion of aluminium alloys en AW-6060 and en AW-6082 , 2014 .
[27] Zhixing Wang,et al. Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum , 2014 .
[28] M. R. Toroghinejad,et al. Effect of stacking fault energy on deformation texture development of nanostructured materials produced by the ARB process , 2014 .
[29] Z. Yin,et al. Effects of Sc and Zr microalloying additions on the recrystallization texture and mechanism of Al–Zn–Mg alloys , 2013 .
[30] C. Kiminami,et al. Microstructure evolution and mechanical properties of Al-Zn-Mg-Cu alloy reprocessed by spray-forming and heat treated at peak aged condition , 2013 .
[31] Y. C. Lin,et al. Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .
[32] S. Ramanathan,et al. Hot deformation behaviour of 7075 alloy , 2011 .
[33] Yun-lai Deng,et al. Evolution of microstructures and textures of 7050 Al alloy hot-rolled plate during staged solution heat-treatments , 2010 .
[34] M. Bamberger,et al. Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS , 2008 .
[35] M. Tiryakioğlu. Si particle size and aspect ratio distributions in an Al–7%Si–0.6%Mg alloy during solution treatment , 2008 .
[36] Q. Meng,et al. The microstructural evolution of an Al–Zn–Mg–Cu alloy during homogenization , 2006 .
[37] E. A. Starke,et al. Progress in structural materials for aerospace systems , 2003 .
[38] R. Ayer,et al. Microanalytical study of the heterogeneous phases in commercial Al-Zn-Mg-Cu alloys , 1985 .