Development and characterization of muscle-based actuators for self-stabilizing swimming biorobots.

Biorobots that harness the power generated by living muscle cells have recently gained interest as an alternative to traditional mechanical robots. However, robust and reliable operation of these biorobots still remains a challenge. Toward this end, we developed a self-stabilizing swimming biorobot that can maintain its submersion depth, pitch, and roll without external intervention. The biorobot developed in this study utilized a fin-based propulsion mechanism. It consisted of a base made from two composite PDMS materials and a thin PDMS cantilever seeded with a confluent layer of heart muscle cells. The characterization of the heart muscle cell sheet revealed the gradual increase of the dynamic contraction force and the static cell traction force, which was accompanied by a linear increase in the expression levels of contractile and cytoskeletal proteins. In the design of the biorobot, instead of relying only on the geometry, we used two composite PDMS materials whose densities were modulated by adding either microballoons or nickel powder. The use of two materials with different mass densities enabled precise control of the weight distribution to ensure a positive restoration force on the biorobot tilted at any angle. The developed biorobot exhibited unique propulsion modes depending on the resting angle of its "fin" or the cantilever, and achieved a maximum velocity of 142 μm s(-1). The technique described in this study to stabilize and propel the biorobot can pave the way for novel developments in biorobotics.

[1]  P. Veltink,et al.  The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications , 1997 .

[2]  Michael Sfakiotakis,et al.  Review of fish swimming modes for aquatic locomotion , 1999 .

[3]  Robert G. Dennis,et al.  Excitability and isometric contractile properties of mammalian skeletal muscle constructs engineered in vitro , 2000, In Vitro Cellular & Developmental Biology - Animal.

[4]  D M Bers,et al.  Calcium fluxes involved in control of cardiac myocyte contraction. , 2000, Circulation research.

[5]  L. E. Becker,et al.  On self-propulsion of micro-machines at low Reynolds number: Purcell's three-link swimmer , 2003, Journal of Fluid Mechanics.

[6]  Hugh Herr,et al.  A swimming robot actuated by living muscle tissue , 2004, Journal of NeuroEngineering and Rehabilitation.

[7]  Byungkyu Kim,et al.  Real-time measurement of the contractile forces of self-organized cardiomyocytes on hybrid biopolymer microcantilevers. , 2005, Analytical chemistry.

[8]  J. Xi,et al.  Self-assembled microdevices driven by muscle , 2005, Nature materials.

[9]  R. Solaro,et al.  Calcium, thin filaments, and the integrative biology of cardiac contractility. , 2005, Annual review of physiology.

[10]  Yoseph Bar-Cohen,et al.  Biomimetics : Biologically Inspired Technologies , 2011 .

[11]  Takehiko Kitamori,et al.  An actuated pump on-chip powered by cultured cardiomyocytes. , 2006, Lab on a chip.

[12]  R. Pi,et al.  An Optimized Protocol for Culture of Cardiomyocyte from Neonatal Rat , 2005, Cytotechnology.

[13]  Masayuki Yamato,et al.  Electrical coupling of cardiomyocyte sheets occurs rapidly via functional gap junction formation. , 2006, Biomaterials.

[14]  Takehiko Kitamori,et al.  A micro-spherical heart pump powered by cultured cardiomyocytes. , 2007, Lab on a chip.

[15]  Richard C. Strohman,et al.  Myogenesis and histogenesis of skeletal muscle on flexible membranes in vitro , 1990, In Vitro Cellular & Developmental Biology.

[16]  G. Whitesides,et al.  Muscular Thin Films for Building Actuators and Powering Devices , 2007, Science.

[17]  Byungkyu Kim,et al.  Establishment of a fabrication method for a long-term actuated hybrid cell robot. , 2007, Lab on a chip.

[18]  Sukho Park,et al.  Micro pumping with cardiomyocyte-polymer hybrid. , 2007, Lab on a chip.

[19]  Keisuke Morishima,et al.  Long-term and room temperature operable bioactuator powered by insect dorsal vessel tissue. , 2009, Lab on a chip.

[20]  Yasunori Yamamoto,et al.  Functional evaluation of artificial skeletal muscle tissue constructs fabricated by a magnetic force-based tissue engineering technique. , 2011, Tissue engineering. Part A.

[21]  Megan L. McCain,et al.  Ensembles of engineered cardiac tissues for physiological and pharmacological study: heart on a chip. , 2011, Lab on a chip.

[22]  William E Louch,et al.  Methods in cardiomyocyte isolation, culture, and gene transfer. , 2011, Journal of molecular and cellular cardiology.

[23]  Josue A. Goss,et al.  Muscle on a chip: in vitro contractility assays for smooth and striated muscle. , 2012, Journal of pharmacological and toxicological methods.

[24]  R. Bashir,et al.  Development of Miniaturized Walking Biological Machines , 2012, Scientific Reports.

[25]  Arianna Menciassi,et al.  Bio-hybrid muscle cell-based actuators , 2012, Biomedical Microdevices.

[26]  Megan L. McCain,et al.  A tissue-engineered jellyfish with biomimetic propulsion , 2012, Nature Biotechnology.

[27]  Quantification of the surface stress in microcantilever biosensors: revisiting Stoney's equation. , 2012, Nanotechnology.

[28]  D. Leo,et al.  Biomimetic jellyfish-inspired underwater vehicle actuated by ionic polymer metal composite actuators , 2012 .

[29]  Ron Weiss,et al.  Formation and optogenetic control of engineered 3D skeletal muscle bioactuators. , 2012, Lab on a chip.

[30]  N. Bursac,et al.  Functional cardiac tissue engineering. , 2012, Regenerative medicine.

[31]  Kumaraswamy Nanthakumar,et al.  Biowire: a New Platform for Maturation of Human Pluripotent Stem Cell Derived Cardiomyocytes Pubmed Central Canada , 2022 .

[32]  Takayuki Hoshino,et al.  Atmospheric-operable bioactuator powered by insect muscle packaged with medium. , 2013, Lab on a chip.

[33]  Takayuki Hoshino,et al.  Voluntary movement controlled by the surface EMG signal for tissue-engineered skeletal muscle on a gripping tool. , 2013, Tissue engineering. Part A.

[34]  Kevin Kit Parker,et al.  Micromolded gelatin hydrogels for extended culture of engineered cardiac tissues. , 2014, Biomaterials.

[35]  B. Williams,et al.  A self-propelled biohybrid swimmer at low Reynolds number , 2014, Nature Communications.

[36]  Ritu Raman,et al.  Three-dimensionally printed biological machines powered by skeletal muscle , 2014, Proceedings of the National Academy of Sciences.

[37]  H. Asada,et al.  Utilization and control of bioactuators across multiple length scales. , 2014, Lab on a chip.

[38]  X. Niu,et al.  A Numerical Study of Jet Propulsion of an Oblate Jellyfish Using a Momentum Exchange-Based Immersed Boundary-Lattice Boltzmann Method , 2014 .

[39]  H. Harry Asada,et al.  Fabrication and characterization of optogenetic, multi-strip cardiac muscles. , 2015, Lab on a chip.