Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree

The aim of this paper is to study the effect of fibre content on mechanical properties, water absorption behaviour and thermal properties of sugar palm fibre (SPF) reinforced plasticized sugar palm starch (SPF/SPS) biocomposites. The biocomposites were prepared with different amounts of fibres (i.e. 10%, 20% and 30% by weight percent) by using glycerol as plasticizer for the starch. The mechanical properties of plasticized SPS improved with the incorporation of fibres. Fibre loading also increased the thermal stability of the biocomposite in this investigation. Water uptake and moisture content of SPF/SPS biocomposites decreased with the incorporation of fibres, which is due to better interfacial bonding between the matrix and fibres as well as the hindrance to absorption caused by the fibres. Fractographic studies through scanning electron microscopy showed homogeneous distribution of fibres and matrix with good adhesion which play an important role in improving the mechanical properties of biocomposites.

[1]  K. Réczey,et al.  Reducing water absorption in compostable starch-based plastics , 2005 .

[2]  B. Kaith,et al.  Development of corn starch based green composites reinforced with Saccharum spontaneum L fiber and graft copolymers--evaluation of thermal, physico-chemical and mechanical properties. , 2010, Bioresource technology.

[3]  D. L. Pavia,et al.  Introduction to Spectroscopy , 1978 .

[4]  Kestur Gundappa Satyanarayana,et al.  Study of the properties of biocomposites. Part I. Cassava starch-green coir fibers from Brazil , 2011 .

[5]  M. Bagby,et al.  Solid State Analysis of Plant Polymers by FTIR , 1988 .

[6]  A. Khairul,et al.  Chemical Composition, Morphological Characteristics, and Cell Wall Structure of Malaysian Oil Palm Fibers , 2008 .

[7]  Mohd Sapuan Salit,et al.  Effects of alkaline treatment and a compatibilizing agent on tensile properties of sugar palm fibre-reinforced high impact polystyrene composites , 2011, BioResources.

[8]  A. Pranovich,et al.  Allyloxy-modified starch with low degree of substitution for fiber reinforced thermoset starch composites , 2011 .

[9]  S. M. Sapuan,et al.  Investigation on Bending Strength and Stiffness of Sugar Palm Fibre from Different Parts Reinforced Unsaturated Polyester Composites , 2011 .

[10]  S. M. Sapuan,et al.  Moisture absorption behavior of sugar palm fiber reinforced epoxy composites , 2008 .

[11]  David Dollimore,et al.  A thermal analysis investigation of partially hydrolyzed starch , 1998 .

[12]  Fabio Yamashita,et al.  Effect of cellulose fibers on the crystallinity and mechanical properties of starch-based films at different relative humidity values , 2009 .

[13]  Eric R. Ziegel,et al.  Concise Encyclopedia of Science and Technology , 1991 .

[14]  S. M. Sapuan,et al.  The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites , 2008 .

[15]  S. M. Sapuan,et al.  NATURAL FIBRE REINFORCED BIODEGRADABLE POLYMER COMPOSITES , 2012 .

[16]  Alain Dufresne,et al.  Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch , 2009 .

[17]  C. Hill,et al.  The preparation and characterisation of a series of chemically modified potato starches , 2002 .

[18]  F. Felissia,et al.  Composite materials of thermoplastic starch and fibers from the ethanol-water fractionation of bagasse , 2011 .

[19]  S. M. Sapuan,et al.  Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites , 2012 .

[20]  S. M. Sapuan,et al.  Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand , 2005 .

[21]  A. J. Carvalho,et al.  Thermoplastic starch–cellulosic fibers composites: preliminary results , 2001 .

[22]  S. Sapuan,et al.  Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata). , 2013, Carbohydrate polymers.

[23]  J. Kennedy,et al.  Studies on the properties of natural fibers-reinforced thermoplastic starch composites , 2005 .

[24]  S. Mohanty,et al.  Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites , 2006 .

[25]  D. Himmelsbach,et al.  The use of FT-IR microspectroscopic mapping to study the effects of enzymatic retting of flax (Linum usitatissimum L) stems† , 2002 .

[26]  L. Avérous,et al.  Biocomposites based on plasticized starch: thermal and mechanical behaviours , 2004 .

[27]  J. Prachayawarakorn,et al.  Properties of thermoplastic rice starch composites reinforced by cotton fiber or low-density polyethylene , 2010 .

[28]  Luiz Pereira Ramos,et al.  Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from Brazil. , 2010 .

[29]  Xingrong Zeng,et al.  Synthesis and Characterization of UV-curable Hyperbranched Urethane Acrylate , 2008 .

[30]  Mohamad Ridzwan Ishak,et al.  Characterization of sugar palm (Arenga pinnata) fibres , 2012, Journal of Thermal Analysis and Calorimetry.

[31]  Z Leman,et al.  Sugar palm (Arenga pinnata): Its fibres, polymers and composites. , 2013, Carbohydrate polymers.

[32]  A. Valadez-González,et al.  Fiber-Matrix Adhesion in Natural Fiber Composites , 2005 .

[33]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[34]  M. Wada,et al.  Thermal Decomposition of Cellulose Crystallites in Wood , 2001 .

[35]  S. Sapuan,et al.  Physical and Chemical Properties of Different Morphological Parts of Sugar Palm Fibres , 2012 .

[36]  Mohamad Ridzwan Ishak,et al.  Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres , 2011 .

[37]  S. M. Sapuan,et al.  Comparative Study of Physical Properties Based on Different Parts of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites , 2011 .