X-Ray Computed Tomography for Dimensional Metrology

[1]  Dimitris Mihailidis,et al.  Computed Tomography: From Photon Statistics to Modern Cone-Beam CT , 2008 .

[2]  A. Cormack.  Representation of a Function by Its Line Integrals, with Some Radiological Applications , 1963 .

[3]  L. De Chiffre,et al.  Interlaboratory comparison of a physical and a virtual assembly measured by CT , 2018 .

[4]  Jochen Hiller,et al.  Estimation of measurement uncertainties in X-ray computed tomography metrology using the substitution method , 2014 .

[5]  S. Carmignato,et al.  Precision additive manufacturing of NiTi parts using micro direct metal deposition , 2018 .

[6]  Robert G. Wilhelm,et al.  Task Specific Uncertainty in Coordinate Measurement , 2001 .

[7]  K. Taguchi,et al.  Vision 20/20: Single photon counting x-ray detectors in medical imaging. , 2013, Medical physics.

[8]  S. Carmignato,et al.  An hysteresis energy-based synthesis of fully reversed axial fatigue behaviour of different polypropylene composites , 2014 .

[9]  Jochen Hiller,et al.  Physical characterization and performance evaluation of an x-ray micro-computed tomography system for dimensional metrology applications , 2012 .

[10]  S. Carmignato,et al.  Micro porosity analysis in additive manufactured NiTi parts using micro computed tomography and electron microscopy , 2016 .

[11]  P. Heřmánek,et al.  Reference object for evaluating the accuracy of porosity measurements by X-ray computed tomography , 2016 .

[12]  K. Schörner.  Development of Methods for Scatter Artifact Correction in Industrial X-ray Cone-beam Computed Tomography , 2012 .

[13]  Wim Dewulf,et al.  Evaluating the effects of detector angular misalignments on simulated computed tomography data , 2016 .

[14]  Uncertainty determination for X-ray computed tomography wear assessment of polyethylene hip joint prostheses , 2018 .

[15]  Michael Schmidt,et al.  Laser based additive manufacturing in industry and academia , 2017 .

[16]  Robert Schmitt,et al.  Uncertainty in measurement for x-ray-computed tomography using calibrated work pieces , 2010 .

[17]  Wim Dewulf,et al.  Industrial X-Ray Computed Tomography , 2018 .

[18]  Daniele Panetta,et al.  Advances in X-ray detectors for clinical and preclinical Computed Tomography , 2016 .

[19]  Enrico Savio,et al.  Influence of surface roughness on computed tomography dimensional measurements , 2017 .

[20]  S Carmignato,et al.  Two-spheres method for evaluating the metrological structural resolution in dimensional computed tomography , 2017 .

[21]  S. Carmignato,et al.  Accuracy of industrial computed tomography measurements: Experimental results from an international comparison , 2012 .

[22]  Robert Schmitt,et al.  Applications of CT for Dimensional Metrology , 2018 .

[23]  Jean-Yves Dantan,et al.  Formal Language for GeoSpelling , 2015, J. Comput. Inf. Sci. Eng..

[24]  Wim Dewulf,et al.  Uncertainty determination and quantification for dimensional measurements with industrial computed tomography , 2013 .

[25]  Pavel Müller,et al.  Coordinate Metrology by Traceable Computed Tomography , 2013 .

[26]  P. Cloetens,et al.  Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick–Baez optics , 2009 .

[27]  Guido Tosello,et al.  A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications , 2013 .

[28]  Robert Schmitt,et al.  Industrial applications of computed tomography , 2014 .

[29]  Lutfi Taner Tunc,et al.  A Testpart for Interdisciplinary Analyses in Micro Production Engineering , 2014 .

[30]  Frank Welkenhuyzen.  Investigation of the Accuracy of an X-ray CT Scanner for Dimensional Metrology with the Aid of Simulations and Calibrated Artifacts , 2016 .

[31]  Frank Härtig,et al.  Current state of standardization in the field of dimensional computed tomography , 2014 .

[32]  Eduard Gröller,et al.  FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers , 2014, 2014 IEEE Pacific Visualization Symposium.

[33]  M. Flessner,et al.  Determination of metrological structural resolution of a CT system using the frequency response on surface structures , 2015 .

[34]  Enrico Savio,et al.  Calibration artefact for the microscale with high aspect ratio: The fiber gauge , 2008 .

[35]  J. Kruth,et al.  Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures , 2011 .

[36]  Hounsfield Gn.  Historical notes on computerized axial tomography. , 1976 .

[37]  Frank Härtig,et al.  Procedure and reference standard to determine the structural resolution in coordinate metrology , 2014 .

[38]  Robert Schmitt,et al.  Model-based optimisation of CT imaging parameters for dimensional measurements on multimaterial workpieces , 2018 .

[39]  Jitendra Rathore,et al.  Principles of X-ray Computed Tomography , 2018 .

[40]  L. Mancini,et al.  Testing of x-ray microtomography systems using a traceable geometrical standard , 2009 .

[41]  H. K. Huang,et al.  ACTA (Automatic Computerized Transverse Axial)-The Whole Body Tomographic X-Ray Scanner , 1974, Other Conferences.

[42]  Markus Bartscher,et al.  Experimental investigation of new multi-material gap reference standard for testing computed tomography systems , 2017 .

[43]  Enrico Savio,et al.  Metrological performance of optical coordinate measuring machines under industrial conditions , 2010 .

[44]  Philip J. Withers,et al.  A new method of performance verification for x-ray computed tomography measurements , 2014, Measurement Science and Technology.

[45]  Robert Schmitt,et al.  Computed tomography for dimensional metrology , 2011 .

[46]  Liam Blunt,et al.  Areal surface texture data extraction from X-ray computed tomography reconstructions of metal additively manufactured parts , 2017 .

[47]  Leonardo De Chiffre,et al.  Experimental investigation of surface determination process on multi-material components for dimensional computed tomography , 2016 .

[48]  Eduard Gröller,et al.  Statistical analysis of Multi-Material Components using Dual Energy CT , 2008, VMV.

[49]  Leonardo De Chiffre,et al.  Integrated Quality Control of Precision Assemblies using Computed Tomography , 2017 .

[50]  Enrico Savio,et al.  Metrology of freeform shaped parts , 2007 .

[51]  Simone Carmignato,et al.  Simulating the influence of scatter and beam hardening in dimensional computed tomography , 2017 .

[52]  Wim Dewulf,et al.  Towards geometrical calibration of x-ray computed tomography systems—a review , 2015 .

[53]  Philipp Krämer,et al.  Predetermination of Measurement Uncertainty in the Application of Computed Tomography , 2013 .

[54]  Filippo Zanini,et al.  Porosity testing methods for the quality assessment of selective laser melted parts , 2016 .

[55]  Nicola Senin,et al.  Topography of selectively laser melted surfaces: A comparison of different measurement methods , 2017 .

[56]  Enrico Savio,et al.  Characterisation of additively manufactured metal surfaces by means of X-ray computed tomography and generalised surface texture parameters , 2019, CIRP Annals.

[57]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[58]  Ceramic-on-metal for total hip replacement: mixing and matching can lead to high wear. , 2010, Artificial organs.

[59]  W D McDavid,et al.  Characterization and correction of cupping effect artefacts in cone beam CT. , 2012, Dento maxillo facial radiology.

[60]  Simone Carmignato,et al.  Porosity measurements by X-ray computed tomography: Accuracy evaluation using a calibrated object , 2017 .

[61]  Wim Dewulf,et al.  Sense and non-sense of beam hardening correction in CT metrology , 2012 .

[62]  L. De Chiffre,et al.  Comparison on Computed Tomography using industrial items , 2014 .

[63]  Filippo Zanini,et al.  New Approach for Verifying the Accuracy of X-ray Computed Tomography Measurements of Surface Topographies in Additively Manufactured Metal Parts , 2018, Journal of Nondestructive Evaluation.

[64]  Markus Bartscher,et al.  Qualification and testing of CT systems , 2018 .

[65]  David A Jaffray,et al.  Accurate technique for complete geometric calibration of cone-beam computed tomography systems. , 2005, Medical physics.

[66]  J. Ambrose,et al.  The EMI scanner. A brief review of the first 650 patients. , 1974, The British journal of radiology.

[67]  Filippo Zanini,et al.  Traceable Porosity Measurements in Industrial Components Using X-Ray Computed Tomography , 2019, Journal of Manufacturing Science and Engineering.

[68]  Toshiyuki Takatsuji,et al.  Numerical Analysis of the Feldkamp-Davis-Kress Effect on Industrial X-Ray Computed Tomography for Dimensional Metrology , 2015, J. Comput. Inf. Sci. Eng..

[69]  J. Radon.  On the determination of functions from their integral values along certain manifolds , 1986, IEEE Transactions on Medical Imaging.

[70]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[71]  Simone Carmignato,et al.  A New Method for Thread Calibration on Coordinate Measuring Machines , 2003 .

[72]  Frank Welkenhuyzen,et al.  A test object with parallel grooves for calibration and accuracy assessment of industrial computed tomography (CT) metrology , 2011 .

[73]  Jiang Hsieh,et al.  Computed Tomography: Principles, Design, Artifacts, and Recent Advances, Fourth Edition , 2022 .

[74]  Enrico Savio,et al.  Traceable volume measurements using coordinate measuring systems , 2011 .

[75]  Wim Dewulf,et al.  Enhanced dimensional measurement by fast determination and compensation of geometrical misalignments of X-ray computed tomography instruments , 2018 .

[76]  S. Affatato,et al.  Quantification of Wear and Deformation in Different Configurations of Polyethylene Acetabular Cups Using Micro X-ray Computed Tomography , 2017, Materials.