Experimental and finite element dynamic analysis of incrementally loaded reinforced concrete structures

This work investigates influence of damage in reinforced concrete (RC) structures on their dynamic properties through modal testing and non-linear finite element (FE) analysis. Five RC beams were designed with the fundamental flexural mode frequencies in the range of 6.5–18.0 Hz for the uncracked state. Mechanical properties of concrete, such as static and dynamic elastic moduli were determined from standard tests and ultra-sonic pulse velocity readings. The beams were incrementally loaded until the span/250 deflection limit was reached and their natural frequencies were measured from the free decay vibrations. The progressive damage reduced fundamental frequencies of tested beams by up to 25%. The non-linear FE analysis was carried out for RC beams and one two-span slab and the calculated reduced frequencies of the 1st and 2nd vibration modes were in excellent agreement with measurements. This led to the conclusion that, given that the non-linear analysis can capture degradation of dynamic stiffness due to cracking, the future dynamic performance and damage identification on the RC structure can be reliably determined from the same FE model. The results reveal potential of the combined modal testing and FE analysis to improve inspection and assessment of the in-service RC structures.

[1]  Rui Calçada,et al.  Numerical evaluation of the non-linear behaviour of cracked RC members under variable-amplitude cyclic loading , 2015 .

[2]  Bernardino Chiaia,et al.  A Practical Equation for Elastic Modulus of Concrete , 2009 .

[3]  Ben H. Jansen,et al.  The dynamic behavior and vibration monitoring of reinforced concrete beams , 1998 .

[4]  W. P. De Wilde,et al.  Damage identification in reinforced concrete structures by dynamic stiffness determination , 2000 .

[5]  Xiaobin Lu,et al.  Evaluation of dynamic modulus of elasticity of concrete using impact-echo method☆ , 2013 .

[6]  E. Jacquelin,et al.  Natural frequency evaluation of a cracked RC beam with or without composite strengthening for a damage assessment , 2005 .

[7]  J. Bungey,et al.  Using compression wave ultrasonic transducers to measure the velocity of surface waves and hence determine dynamic modulus of elasticity for concrete , 1996 .

[8]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[9]  A. Irfanoglu,et al.  Variation of Small Amplitude Vibration Dynamic Properties with Displacement in Reinforced Concrete Structures , 2012 .

[10]  Paul Reynolds,et al.  Dynamic modelling of post-tensioned concrete floors using finite element analysis , 2001 .

[11]  An experimental study on the use of dynamic tests for surveillance of concrete structures , 1994 .

[12]  M. Musiał,et al.  Static and dynamic stiffness of reinforced concrete beams , 2012 .

[13]  Xinqun Zhu,et al.  Damage detection of RC slabs using nonlinear vibration features , 2009 .

[14]  E. Peter Carden,et al.  Vibration Based Condition Monitoring: A Review , 2004 .

[15]  Jin-Keun Kim,et al.  Effect of temperature and age on the relationship between dynamic and static elastic modulus of concrete , 2004 .

[16]  I. Shkolnik.  Effect of nonlinear response of concrete on its elastic modulus and strength , 2005 .

[17]  Mohamed Maalej,et al.  Damage Quantification of Flexurally Loaded RC Slab Using Frequency Response Data , 2004 .

[18]  O. S. Salawu.  Detection of structural damage through changes in frequency: a review , 1997 .

[19]  P. D. McFadden,et al.  Nonlinear Vibration Characteristics of Damaged Concrete Beams , 2003 .