Lithographic scanner stability improvements through advanced metrology and control

Holistic lithography is needed to cope with decreasing process windows and is built on three pillars: Scanner Tuning, Computational Lithography and Metrology & Control. The relative importance of stability to the overall manufacturing process latitude increases. Overlay and focus stability control applications are important elements in improving stability of the lithographic process. The control applications rely on advanced control algorithms and fast and precise metrology. To address the metrology needs at the 32 nm node and beyond, an optical scatterometry tool was developed capable of measuring CD, focus-dose as well as overlay. Besides stability and control of lithographic performance also scanner matching is a critical enabler where application development and metrology performance are key. In this paper we discuss the design and performance of the metrology tool, the focus and overlay control application and the application of scatterometry in scanner matching solutions.

[1]  T. Başar,et al.  A New Approach to Linear Filtering and Prediction Problems , 2001 .

[2]  Chris A. Mack,et al.  Improved Model for Focus-Exposure Data Analysis , 2003 .

[3]  Tsann-Bim Chiou,et al.  Using intrafield high-order correction to achieve overlay requirement beyond sub-40nm node , 2009, Advanced Lithography.

[4]  Christopher P. Ausschnitt,et al.  Distinguishing dose, focus, and blur for lithography characterization and control , 2007, SPIE Advanced Lithography.

[5]  Christopher P. Ausschnitt,et al.  Focus and dose characterization of immersion photoclusters , 2009, Advanced Lithography.

[6]  R. E. Kalman,et al.  A New Approach to Linear Filtering and Prediction Problems , 2002 .

[7]  Christopher P. Ausschnitt,et al.  Modeling for profile-based process-window metrology , 2004, SPIE Advanced Lithography.

[8]  Noelle Wright,et al.  A sophisticated metrology solution for advanced lithography: addressing the most stringent needs of today as well as future lithography , 2009, Lithography Asia.

[9]  Oscar Noordman,et al.  Performance of FlexRay: a fully programmable illumination system for generation of freeform sources on high NA immersion systems , 2010, Advanced Lithography.

[10]  Christopher P. Ausschnitt,et al.  Manufacturing implementation of scatterometry and other techniques for 300-mm lithography tool controls , 2009, Advanced Lithography.

[11]  Noelle Wright,et al.  A scatterometry based CD metrology solution for advanced nodes, including capability of handling birefringent layers with uniaxial anisotropy , 2009, Advanced Lithography.

[12]  Jason Shieh,et al.  Immersion scanner proximity matching using angle resolving scatterometry metrology , 2009, Advanced Lithography.

[13]  Chris A. Mack,et al.  New model for focus-exposure data analysis , 2003, SPIE Advanced Lithography.

[14]  Christopher P. Ausschnitt.  Distinguishing dose from defocus for in-line lithography control , 1999, Advanced Lithography.

[15]  Noelle Wright,et al.  Evaluation of a new metrology technique to support the needs of accuracy, precision, speed, and sophistication in near-future lithography , 2009, Advanced Lithography.

[16]  Jason Shieh,et al.  Improving 1D optical proximity effect matching for 45-nm node by scatterometry metrology , 2009, Lithography Asia.

[17]  Oscar Noordman,et al.  Etch, reticle, and track CD fingerprint corrections with local dose compensation , 2005, SPIE Advanced Lithography.