Review on battery thermal management system for electric vehicles

[1]  Weixiong Wu,et al.  Thermal management optimization of a prismatic battery with shape-stabilized phase change material , 2018, International Journal of Heat and Mass Transfer.

[2]  Martin Agelin-Chaab,et al.  Experimental investigation of a novel hybrid cooling method for lithium-ion batteries , 2018 .

[3]  Shuo Zhou,et al.  Experimental investigation of thermal and strain management for lithium-ion battery pack in heat pipe cooling , 2018 .

[4]  Joeri Van Mierlo,et al.  Phase-change materials (PCM) for automotive applications: A review , 2018 .

[5]  Xin Ye,et al.  Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA) , 2018 .

[6]  Ibrahim Dincer,et al.  Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling , 2018 .

[7]  Sihui Hong,et al.  Design of flow configuration for parallel air-cooled battery thermal management system with secondary vent , 2018 .

[8]  Yong Li,et al.  Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures , 2018 .

[9]  Xuning Feng,et al.  Thermal runaway mechanism of lithium ion battery for electric vehicles: A review , 2018 .

[10]  Weixiong Wu,et al.  Thermal optimization of composite PCM based large-format lithium-ion battery modules under extreme operating conditions , 2017 .

[11]  Guoqing Zhang,et al.  Liquid cooling based on thermal silica plate for battery thermal management system , 2017 .

[12]  Mengyan Zang,et al.  Structural optimization of lithium-ion battery pack with forced air cooling system , 2017 .

[13]  Lei Cao,et al.  A review on battery thermal management in electric vehicle application , 2017 .

[14]  Mengxuan Song,et al.  Design of Parallel Air-Cooled Battery Thermal Management System through Numerical Study , 2017 .

[15]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[16]  Mengxuan Song,et al.  Structure optimization of parallel air-cooled battery thermal management system , 2017 .

[17]  Zhonghao Rao,et al.  Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface , 2017 .

[18]  Ibrahim Dincer,et al.  Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery , 2017 .

[19]  Weixiong Wu,et al.  Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system , 2017 .

[20]  Jiateng Zhao,et al.  Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack , 2017 .

[21]  Søren Knudsen Kær,et al.  Towards an Ultimate Battery Thermal Management System: A Review , 2017 .

[22]  Yan‐Bing He,et al.  Influence of charge rate on the cycling degradation of LiFePO4/mesocarbon microbead batteries under low temperature , 2017, Ionics.

[23]  Said Al-Hallaj,et al.  Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study , 2017 .

[24]  Takashi Yamada,et al.  Analysis of a lithium-ion battery cooling system for electric vehicles using a phase-change material and heat pipes , 2017 .

[25]  Fangming Jiang,et al.  Thermal safety of lithium-ion batteries with various cathode materials: A numerical study , 2016 .

[26]  Weixiong Wu,et al.  An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack , 2016 .

[27]  Zhonghao Rao,et al.  Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling , 2016 .

[28]  Yuying Yan,et al.  A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles , 2016 .

[29]  Guoqing Zhang,et al.  Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins , 2016 .

[30]  Lan Fengchong,et al.  Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling , 2016 .

[31]  Liwen Jin,et al.  Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies , 2016 .

[32]  Joris Jaguemont,et al.  Lithium-Ion Battery Aging Experiments at Subzero Temperatures and Model Development for Capacity Fade Estimation , 2016, IEEE Transactions on Vehicular Technology.

[33]  Yanbao Ma,et al.  Thermal management for high power lithium-ion battery by minichannel aluminum tubes , 2016 .

[34]  Chunjing Lin,et al.  Thermal Management of Power Batteries for Electric Vehicles Using Phase Change Materials: A Review , 2016 .

[35]  Zhonghao Rao,et al.  Thermal performance of phase change material/oscillating heat pipe-based battery thermal management system , 2016 .

[36]  Stefano Longo,et al.  A review on electric vehicle battery modelling: From Lithium-ion toward Lithium–Sulphur , 2016 .

[37]  Xiongwen Zhang,et al.  Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination , 2016 .

[38]  Zhonghao Rao,et al.  Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system , 2016 .

[39]  Tapesh Joshi Capacity and power fade in lithium-ion batteries , 2016 .

[40]  Tao Wang,et al.  Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model , 2015 .

[41]  Jiateng Zhao,et al.  Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery , 2015 .

[42]  B. Li,et al.  Experimental investigation on EV battery cooling and heating by heat pipes , 2015 .

[43]  Zhonghao Rao,et al.  Experimental investigation of battery thermal management system for electric vehicle based on paraffin/copper foam , 2015 .

[44]  Lip Huat Saw,et al.  Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging , 2015 .

[45]  Zhengguo Zhang,et al.  A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling , 2015 .

[46]  Xiongwen Zhang,et al.  Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements , 2015 .

[47]  Chengning Zhang,et al.  Preheating method of lithium-ion batteries in an electric vehicle , 2015, ENERGYO.

[48]  J. Ji,et al.  Recent development and application of thermoelectric generator and cooler , 2015 .

[49]  Li Jia,et al.  Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery , 2015 .

[50]  R. Kuhn,et al.  Thermal management of batteries for electric vehicles , 2015 .

[51]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .

[52]  Jiateng Zhao,et al.  Investigation of power battery thermal management by using mini-channel cold plate , 2015 .

[53]  Hongguang Sun,et al.  Development of cooling strategy for an air cooled lithium-ion battery pack , 2014 .

[54]  Choi Yong-Seok,et al.  Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles , 2014 .

[55]  Yu Kuahai,et al.  Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack , 2014 .

[56]  Philippe Marty,et al.  Experimental performances of a battery thermal management system using a phase change material , 2014 .

[57]  Ibrahim Dincer,et al.  Modeling of passive thermal management for electric vehicle battery packs with PCM between cells , 2014 .

[58]  Tao Wang,et al.  Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies , 2014 .

[59]  Bernard Sahut,et al.  Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery , 2014 .

[60]  Zhonghao Rao,et al.  Experimental study of an OHP-cooled thermal management system for electric vehicle power battery , 2014 .

[61]  Bin Guo,et al.  Numerical Analysis and Design of Thermal Management System for Lithium Ion Battery Pack Using Thermoelectric Coolers , 2014 .

[62]  Jason B. Siegel,et al.  A lumped-parameter electro-thermal model for cylindrical batteries , 2014 .

[63]  Ibrahim Dincer,et al.  Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles , 2014 .

[64]  G. Tan,et al.  A review of thermoelectric cooling: Materials, modeling and applications , 2014 .

[65]  Naoki Baba,et al.  Numerical simulation of thermal behavior of lithium-ion secondary batteries using the enhanced single particle model , 2014 .

[66]  Peter Kritzer,et al.  Improved Safety for Automotive Lithium Batteries: An Innovative Approach to include an Emergency Cooling Element , 2014 .

[67]  N. Brandon,et al.  The effect of thermal gradients on the performance of lithium-ion batteries , 2014 .

[68]  S. Said,et al.  A review on thermoelectric renewable energy: Principle parameters that affect their performance , 2014 .

[69]  N. Omar,et al.  Development of an Advanced Two-Dimensional Thermal Model for Large size Lithium-ion Pouch Cells , 2014 .

[70]  Siaw Kiang Chou,et al.  Ultra-thin minichannel LCP for EV battery thermal management , 2014 .

[71]  Anthony Jarrett,et al.  Influence of operating conditions on the optimum design of electric vehicle battery cooling plates , 2014 .

[72]  Bin Jiang,et al.  Performance Analysis of a Heat Pump Air Conditioning System Coupling with Battery Cooling for Electric Vehicles , 2014 .

[73]  Ulrich Schmid,et al.  Thermoelectric Energy Harvesting Using Phase Change Materials (PCMs) in High Temperature Environments in Aircraft , 2014, Journal of Electronic Materials.

[74]  Nigel P. Brandon,et al.  Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs , 2013 .

[75]  X. M. Xu,et al.  Research on the heat dissipation performance of battery pack based on forced air cooling , 2013 .

[76]  Gi-Heon Kim,et al.  A three-dimensional multi-physics model for a Li-ion battery , 2013 .

[77]  Heesung Park,et al.  A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles , 2013 .

[78]  A. Pesaran,et al.  A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles , 2013 .

[79]  Rui Liu,et al.  Numerical and analytical modeling of lithium ion battery thermal behaviors with different cooling designs , 2013 .

[80]  P. Novák,et al.  Memory effect in a lithium-ion battery. , 2013, Nature materials.

[81]  Dirk Uwe Sauer,et al.  A review of current automotive battery technology and future prospects , 2013 .

[82]  Cong Zhu,et al.  Development of a theoretically based thermal model for lithium ion battery pack , 2013 .

[83]  Padampat Chander Bhatia Thermal Analysis of Lithium-Ion Battery Packs and Thermal Management Solutions , 2013 .

[84]  Zhonghao Rao,et al.  Experimental investigation on thermal management of electric vehicle battery with heat pipe , 2013 .

[85]  B. Ji,et al.  Active temperature control of Li-ion batteries in electric vehicles , 2013 .

[86]  Chakib Alaoui,et al.  Solid-State Thermal Management for Lithium-Ion EV Batteries , 2013, IEEE Transactions on Vehicular Technology.

[87]  Kim Yeow,et al.  Design of Direct and Indirect Liquid Cooling Systems for High- Capacity, High-Power Lithium-Ion Battery Packs , 2012 .

[88]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[89]  Anthony Jarrett,et al.  Design optimization of electric vehicle battery cooling plates for thermal performance , 2011 .

[90]  Zhonghao Rao,et al.  A review of power battery thermal energy management , 2011 .

[91]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[92]  Antonio Flores-Tlacuahuac,et al.  Modeling and simulation of lithium-ion batteries , 2011, Comput. Chem. Eng..

[93]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[94]  R. Mahamud,et al.  Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity , 2011 .

[95]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[96]  M. A. Karri,et al.  Exhaust energy conversion by thermoelectric generator: Two case studies , 2011 .

[97]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[98]  Greg F. Naterer,et al.  Heat transfer in phase change materials for thermal management of electric vehicle battery modules , 2010 .

[99]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[100]  M. Lazard,et al.  Modeling a Thermoelectric Generator Applied to Diesel Automotive Heat Recovery , 2010 .

[101]  M. Verbrugge,et al.  Aging Mechanisms of LiFePO4 Batteries Deduced by Electrochemical and Structural Analyses , 2010 .

[102]  Michel Broussely Battery Requirements for HEVs, PHEVs, and EVs: An Overview , 2010 .

[103]  S. Oberthür,et al.  The new climate policies of the European Union: internal legislation and climate diplomacy , 2010 .

[104]  Said Al-Hallaj,et al.  An alternative cooling system to enhance the safety of Li-ion battery packs , 2009 .

[105]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[106]  L. Bell Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems , 2008, Science.

[107]  J. Selman,et al.  Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature , 2008 .

[108]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[109]  Srdjan M. Lukic,et al.  Energy Storage Systems for Automotive Applications , 2008, IEEE Transactions on Industrial Electronics.

[110]  Xiaodong Zhang,et al.  Overview of Thermoelectric Generation for Hybrid Vehicles , 2008 .

[111]  Chaoyang Wang,et al.  Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles , 2006 .

[112]  Jiang Fan,et al.  Studies on Charging Lithium-Ion Cells at Low Temperatures , 2006 .

[113]  T. P. Kumar,et al.  Safety mechanisms in lithium-ion batteries , 2006 .

[114]  K. Amine,et al.  High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells , 2005 .

[115]  Ziyad M. Salameh,et al.  A novel thermal management for electric and hybrid vehicles , 2005, IEEE Transactions on Vehicular Technology.

[116]  M. A. Habib,et al.  The effect of temperature on capacity and power in cycled lithium ion batteries , 2005 .

[117]  T. Stuart,et al.  HEV battery heating using AC currents , 2004 .

[118]  M. Armand,et al.  Pregnancy: A cloned horse born to its dam twin , 2003, Nature.

[119]  Jiang Fan On the discharge capability and its limiting factors of commercial 18650 Li-ion cell at low temperatures , 2003 .

[120]  Kang Xu,et al.  The low temperature performance of Li-ion batteries , 2003 .

[121]  J. Newman,et al.  Thermal Modeling of Porous Insertion Electrodes , 2003 .

[122]  John Lowry,et al.  Electric Vehicle Technology Explained , 2003 .

[123]  B. Popov,et al.  Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part I. Cycling performance , 2002 .

[124]  Ahmad Pesaran,et al.  Battery thermal models for hybrid vehicle simulations , 2002 .

[125]  J. Shim,et al.  Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature , 2002 .

[126]  Mao-Sung Wu,et al.  Heat dissipation design for lithium-ion batteries , 2002 .

[127]  F. E. Little,et al.  Low-Temperature Characterization of Lithium-Ion Carbon Anodes via Microperturbation Measurement , 2002 .

[128]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[129]  A. Pesaran Battery Thermal Management in EVs and HEVs : Issues and Solutions , 2001 .

[130]  J. Selman,et al.  A novel thermal management system for electric vehicle batteries using phase-change material , 2000 .

[131]  Chaoyang Wang,et al.  Thermal‐Electrochemical Modeling of Battery Systems , 2000 .

[132]  Hsiu-Ping Lin,et al.  Low temperature electrolytes for Li-ion PVDF cells , 2000 .

[133]  B. Ratnakumar,et al.  Irreversible Capacities of Graphite in Low‐Temperature Electrolytes for Lithium‐Ion Batteries , 1999 .

[134]  J. Selman,et al.  Thermal modeling and design considerations of lithium-ion batteries , 1999 .

[135]  Ahmad Pesaran,et al.  An Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs , 1999 .