Wireless communication influence on CNC machine tool probe metrological parameters

The influence of the wireless communication on CNC machine tools touch-trigger probe inaccuracy of probing is investigated. Factors such as time of processing and wireless transmission of trigger signal from the probe to the CNC machine tool controller including position and orientation of the interface receiver are taken into consideration. A new method allowing to obtain 3D probe error characteristics with several times more accuracy than the procedure used on a CNC machine tools has been applied. The analyses have been performed for several wireless interfaces of two types: an optical and a radio type. The influence of the abovementioned parameters has been analysed theoretically and verified experimentally. Good agreement between the proposed theoretical model and experimental data has been obtained.

[1]  M.-W. Cho,et al.  Inspection Planning Strategy for the On-Machine Measurement Process Based on CAD/CAM/CAI Integration , 2002 .

[2]  Myeong-Woo Cho,et al.  Integrated error compensation method using OMM system for profile milling operation , 2003 .

[3]  Michał Jankowski,et al.  Machine tool probes testing using a moving inner hemispherical master artefact , 2014 .

[4]  Steven D. Phillips,et al.  Error compensation for CMM touch trigger probes , 1996 .

[5]  Marek Dobosz,et al.  Influence of measured objects parameters on CMM touch trigger probe accuracy of probing , 2005 .

[6]  J.R.R. Mayer,et al.  Axis Location Errors and Error Motions Calibration for a Five-axis Machine Tool Using the SAMBA Method , 2014 .

[7]  Soichi Ibaraki,et al.  Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe , 2013 .

[8]  Hui Zhang,et al.  State Estimation of Discrete-Time Takagi–Sugeno Fuzzy Systems in a Network Environment , 2015, IEEE Transactions on Cybernetics.

[9]  Byung-Kwon Min,et al.  Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system , 2004 .

[10]  Hui Zhang,et al.  On Energy-to-Peak Filtering for Nonuniformly Sampled Nonlinear Systems: A Markovian Jump System Approach , 2014, IEEE Transactions on Fuzzy Systems.

[11]  Marek Balazinski,et al.  Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process , 2014, Int. J. Comput. Integr. Manuf..

[12]  M. W. Cho,et al.  Machining error compensation using radial basis function network based on CAD/CAM/CAI integration concept , 2002 .

[13]  Jianguo Yang,et al.  Using a double ball bar to identify position-independent geometric errors on the rotary axes of five-axis machine tools , 2014 .

[14]  Marek Dobosz,et al.  Metrological feasibilities of CMM touch trigger probes. Part I: 3D theoretical model of probe pretravel , 2003 .

[15]  Xiangdong Zhou,et al.  Identification of location errors by a touch-trigger probe on five-axis machine tools with a tilting head , 2015 .

[16]  M. Byszewski,et al.  Setup for Triggering Force Testing of Touch Probes for CNC Machine Tools and CMMs , 2013 .

[17]  Steven D. Phillips,et al.  Practical aspects of touch-trigger probe error compensation , 1997 .

[18]  James Moyne,et al.  IMPLEMENTATION OF NETWORKED MACHINE TOOLS IN RECONFIGURABLE MANUFACTURING SYSTEMS , 2000 .

[19]  Marek Dobosz,et al.  Metrological feasibilities of CMM touch trigger probes Part II: Experimental verification of the 3D theoretical model of probe pretravel , 2003 .

[20]  J. Sładek,et al.  Evaluation of coordinate measurement uncertainty with use of virtual machine model based on Monte Carlo method , 2012 .

[21]  Zhenjiu Zhang,et al.  A general strategy for geometric error identification of multi-axis machine tools based on point measurement , 2013 .

[22]  J.R.R. Mayer,et al.  Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact , 2012 .

[23]  Soichi Ibaraki,et al.  Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe , 2014, Int. J. Autom. Technol..