A switched-capacitor interface for differential capacitance transducers

For high-accuracy signal processing of differential capacitance transducers, interface circuitry based on a switched-capacitor (SC) sample/hold (S/H) circuit is developed. Driven by nonoverlapping two-phase clocks, the interface produces the output voltage which is proportional to the ratio of difference-to-sum of two capacitors of a differential transducer. Performances of a prototype chip fabricated using 0.6-/spl mu/m n-well CMOS process were measured and compared with those simulated by HSPICE. The measured results indicate that 0.1% resolution is achievable with the proposed interface and the temperature-dependence of the interface is small. An interface circuit improved for smaller temperature-dependence is also proposed and its operation is confirmed experimentally.

[1]  Gabor C. Temes,et al.  High-accuracy circuits for on-chip capacitance ratio testing or sensor readout , 1994 .

[2]  M. Yamada,et al.  A capacitive pressure sensor interface using oversampling /spl Delta/-/spl Sigma/ demodulation techniques , 1997 .

[3]  Kenzo Watanabe,et al.  A switched-capacitor charge-balancing analog-to-digital converter and its application to capacitance measurement , 1987, IEEE Transactions on Instrumentation and Measurement.

[4]  Bo Wang,et al.  High-accuracy circuits for on-chip capacitive ratio testing and sensor readout , 1998, IEEE Trans. Instrum. Meas..

[5]  T. Masuda,et al.  An interface circuit for high-accuracy signal processing of differential-capacitance transducers , 1996, Quality Measurement: The Indispensable Bridge between Theory and Reality (No Measurements? No Science! Joint Conference - 1996: IEEE Instrumentation and Measurement Technology Conference and IMEKO Tec.

[6]  Larry K. Baxter,et al.  Capacitive Sensors: Design and Applications , 1996 .

[7]  T. Masuda,et al.  A relaxation-oscillator-based interface for high-accuracy ratiometric signal processing of differential-capacitance transducers , 1997, IEEE Instrumentation and Measurement Technology Conference Sensing, Processing, Networking. IMTC Proceedings.

[8]  Kenzo Watanabe,et al.  A high-accuracy high-speed signal processing circuit of differential-capacitance transducers , 1998, IEEE Trans. Instrum. Meas..

[9]  T. R. Viswanathan,et al.  Switched-capacitor circuits with reduced sensitivity to amplifier gain , 1987 .

[10]  F. N. Toth,et al.  Ultra-linear, low-cost measurement system for multi-electrode pF-range capacitors , 1995, Proceedings of 1995 IEEE Instrumentation and Measurement Technology Conference - IMTC '95.