Surrogate Modeling of Manufacturing Variation Effects on Unsteady Interactions in a Transonic Turbine

[1]  David S. Riha,et al.  Effect of Manufacturing Variability on Turbine Engine Performance: A Probabilistic Study , 2013 .

[2]  Joseph A. Beck,et al.  Automated Finite Element Model Mesh Updating Scheme Applicable to Mistuning Analysis , 2014 .

[3]  Joseph A. Beck,et al.  Component-Mode Reduced-Order Models for Geometric Mistuning of Integrally Bladed Rotors , 2013 .

[4]  Ramana V. Grandhi,et al.  Probabilistic High Cycle Fatigue Assessment Process for Integrally Bladed Rotors , 2005 .

[5]  Bogdan Marcu,et al.  Prediction of Unsteady Loads and Analysis of Flow Changes due to Turbine Blade Manufacturing Variations during the Development of Turbines for the MB-XX Advanced Upper Stage Engine , 2002 .

[6]  Carsten Clemen,et al.  Introduction of a Parameter Based Compressor Blade Model for Considering Measured Geometry Uncertainties in Numerical Simulation , 2009 .

[7]  Rainer Schnell,et al.  On the Impact of Geometric Variability on Fan Aerodynamic Performance, Unsteady Blade Row Interaction, and Its Mechanical Characteristics , 2014 .

[8]  Michael K. Ooten,et al.  Unsteady Aerodynamic Interaction in a Closely Coupled Turbine Consistent With Contrarotation , 2016 .

[9]  John P. Clark,et al.  Reducing Shock Interactions in Transonic Turbine via Three-Dimensional Aerodynamic Shaping , 2014 .

[10]  Michael Beetz,et al.  Uncertainty Analysis for Large-Scale Industrial Radial Compressors , 2010 .

[11]  Andrea Panizza,et al.  Performance Uncertainty Quantification for Centrifugal Compressors: Part 1—Stage Performance Variation , 2012 .

[12]  J. P. van Buijtenen,et al.  Optimization of a Centrifugal Compressor Impeller for Robustness to Manufacturing Uncertainties , 2016 .

[13]  Ramana V. Grandhi,et al.  Probabilistic Analysis of Geometric Uncertainty Effects on Blade Modal Response , 2003 .

[14]  Gabriel Banks,et al.  Gradient-Based Adjoint and Design of Experiment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades , 2016 .

[15]  Andrea Panizza,et al.  Efficient Uncertainty Quantification of Centrifugal Compressor Performance Using Polynomial Chaos , 2014 .

[16]  Matthias Voigt,et al.  Probabilistic Analysis of Radial Gear Compressors , 2012 .

[17]  Ivan McBean,et al.  Statistical Evaluation of the Performance Impact of Manufacturing Variations for Steam Turbines , 2016 .

[18]  Michael K. Ooten,et al.  Aerodynamic Damping Predictions for Oscillating Airfoils in Cascades Using Moving Meshes , 2016 .

[19]  Andrea Panizza,et al.  Impact of Manufacturing Variability on the Aerodynamic Performance of a Centrifugal Compressor Stage With Curvilinear Blades , 2016 .

[20]  Alexander Lange,et al.  Probabilistic CFD Simulation of a High-Pressure Compressor Stage Taking Manufacturing Variability Into Account , 2010 .

[21]  Alex A. Kaszynski,et al.  THE EFFECT OF MANUFACTURING VARIATIONS ON UNSTEADY INTERACTION IN A TRANSONIC TURBINE , 2018 .

[22]  Michael K. Ooten,et al.  Unsteady Aerodynamic Interaction in a Closely-Coupled Turbine Consistent With Contra-Rotation , 2015 .

[23]  S. S. Magge,et al.  Using CFD to Reduce Resonant Stresses on a Single-Stage, High-Pressure Turbine Blade , 2002 .

[24]  Joseph A. Beck,et al.  Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning Methods , 2013 .

[25]  Marcus Meyer,et al.  Probabilistic CFD Analysis of High Pressure Turbine Blades Considering Real Geometric Effects , 2013 .

[26]  Matthias Voigt,et al.  Impact of Manufacturing Variability and Nonaxisymmetry on High-Pressure Compressor Stage Performance , 2012 .

[27]  Joseph A. Beck,et al.  Uncertainties of an Automated Optical 3D Geometry Measurement, Modeling, and Analysis Process for Mistuned Integrally Bladed Rotor Reverse Engineering , 2013 .

[28]  Joseph A. Beck,et al.  Experimental Validation of a Mesh Quality Optimized Morphed Geometric Mistuning Model , 2015 .